[Amps] 3CX1500D7 VS 3CX1500A7

[R.Measures]

•  --  Bil  --  The higher-freq. bands use Cu-tubing conductors.  My 
guess at the 10m conductor is c. 3/8" tubing.    Also worth noting is 
that the TL-922 pulls cooling air through the tank inductors and the 
output bandswitch.  
cheers

>On Fri, 19 Mar 2004 12:22:10 -0800, R.Measures wrote:
>
>>A good example of 
>>an amplifier with adequate skin-effect compensation is the TL-922. 
>
>_________________________________________________________
>
>Could you (or anyone) provide the wire size of the TL-922 tank coil,
>especially the ten meter section?   May as well homebrew it right.
>
>--
>73, Bill W6WRT
>QSLs via LoTW
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>