[Amps] Looking for a design for a single 4cx250b tube on 50 Mhz-six meters.

[craxd]

Ken,

If six meters is all your wanting, no higher, I'd take a look at the way 
the old Pride amplifier was made. The schematic for it is all over the 
net. The input and output tank will need to be changed for six meters 
but the circuit is almost the same. Pride made two models of this (both 
the same), I think one was called KW-One and the other a 300 if I 
recall. It dont have the best regulation for the screen and G1 bias, but 
it did work up to 10 meters using one 4CX250B.

http://cbtricks.com/Amp/pride/index.htm

Will Matney