[Amps] Looking for a design for a single 4cx250b tube on 50 Mhz-six meters.

[Bill Fuqua]

     The manual claims that a single 4CX250B will produce 600 watts peak 
output. It has unregulated bias supplies as well.
I wonder if that is figuring peak voltage squared divided by resistance 
rather than PEP value.

73
Bill wa4lav

At 12:12 PM 10/12/2004 -0400, craxd wrote:
>Ken,
>
>If six meters is all your wanting, no higher, I'd take a look at the way 
>the old Pride amplifier was made. The schematic for it is all over the 
>net. The input and output tank will need to be changed for six meters but 
>the circuit is almost the same. Pride made two models of this (both the 
>same), I think one was called KW-One and the other a 300 if I recall. It 
>dont have the best regulation for the screen and G1 bias, but it did work 
>up to 10 meters using one 4CX250B.
>
>http://cbtricks.com/Amp/pride/index.htm
>
>Will Matney
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps