[Amps] gu84b tube length and sockets

[john devoldere]

anyone needs brand new original GU84 sockets or GU84 tubes (I have a bunch, 
not new but in GOOD condition), contact me please.
73
John, ON4UN


----- Original Message ----- 
From: "Thomas Hix" <w4th at hotmail.com>
To: <amps at contesting.com>
Sent: Thursday, October 14, 2004 8:24 PM
Subject: [Amps] gu84b tube length and sockets


> will Matney said
>
> "There's two versions of the GU-84 tube, one slightly longer than the
> other. The shorter version will not fit in the socket that has the built
> in chimney (air system type). Tom has another socket, custom made that
> should fit both"
> =============================================================
> I was not aware that there were two versions of the gu84b tube.......has 
> anyone else run into this?
> As to my custom made socket working for either length gu84b tube.....yes 
> it will work just fine because it does not come with the chimney......this 
> socket that I have custom made will also work for the gu78b tube as well.
> Thanks to Will for bringing this to my attention.
> 73
> Tom Hikx.....Tom's Tubes......w4th
>
>
>
>
>
> Tom's Tubes: Amateur Radio Amp Tubes & Sockets, PEP Boards & VFO 
> Stabilizers, CW Keys, K4POZ Screwdriver Antennas & G3SEK Triode/Tetrode 
> Boards & Kits. http://www.tomstubes.com
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>