[Amps] Coil cooling for tubular coils.

[R.Measures]

On Sep 3, 2004, at 1:51 PM, Will Matney wrote:

> Another idea I thought of for tubular coils, to keep them super cool, 
> would be to terminate one end through a hollow insulated standoff into 
> a pressurized chassis. This would force air through the tubing itself 
> and out the other end the same as the blower forcing air through the 
> fins on a tube. Just a thought =)
>
When a pressurized chassis is used, another method is to drill a grid 
of small holes c. 20mm apart in the chassis directly under  the 
inductor so that pressurized air cools it during Tx.
>
>
Richard L. Measures, AG6K, 805.386.3734.  www.somis.org