September 2004 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Sep 1 00:36:34 EST 2004
Ending: Wed Sep 29 16:48:12 EST 2004
Messages: 476

• [Amps] Drake L4 conversion to use 3CX1200A7, discussed in CQ 10-1985   R.Measures
• [Amps] How do I determine Class   R.Measures
  • [Amps] How do I determine Class   Jim Isbell
• [Amps] Overengineering a pi-network bandswitch   Angel Vilaseca
  • [Amps] Overengineering a pi-network bandswitch   R.Measures
• [Amps] FS GU-84B AMP   Chris Fox NI4L
• [Amps] conductivity problem   Will Matney
  • [Amps] conductivity problem   R.Measures
• [Amps] OEP caps   Will Matney
• [Amps] 4-400A and QB4-1100 amp - TSPA   John T. M. Lyles
  • [Amps] 4-400A and QB4-1100 amp - TSPA   Bill Fuqua
    • [Amps] 4-400A and QB4-1100 amp - TSPA   R.Measures
  • [Amps] 4-400A and QB4-1100 amp - TSPA   R.Measures
    • [Amps] Thanks!   Osten B Magnusson
      • [Amps] Thanks!   Steve Thompson
• [Amps] How do I determine Class   Jim Isbell
  • [Amps] How do I determine Class   R.Measures
    • [Amps] How do I determine Class   Bill Fuqua
      • [Amps] How do I determine Class   R.Measures
      • [Amps] How do I determine Class   Bill Fuqua
      • [Amps] How do I determine Class   R.Measures
      • [Amps] How do I determine Class   Jim Isbell
• [BULK] - Re: [Amps] 4-400A and QB4-1100 amp - TSPA   Steve Katz
• [Amps] A question!   Osten B Magnusson
  • [Amps] A question!   R.Measures
• [Amps] A question!   Will Matney
  • [Amps] A question!   Pete Smith
• [Amps] 4-400A and QB4-1100 amp - TSPA   Bill Fuqua
• [Amps] A question!   Radio WC6W
• [Amps] A 3-500Z question...   Kim Elmore
  • [Amps] A 3-500Z question...   R.Measures
• [Amps] AL-1500 pi-network capabilities   Rob Atkinson, K5UJ
  • [Amps] AL-1500 pi-network capabilities   R.Measures
• [Amps] Homeland Security   Will Matney
  • [Amps] Homeland Security   Bill Fuqua
    • [Amps] Homeland Security   Will Matney
      • [Amps] Homeland Security   Bill Fuqua
    • [Amps] Homeland Security   R.Measures
• [Amps] Johnson kW's   John T. M. Lyles
• [BULK] - [Amps] Tempo Henry 2002 / FT-736R   Steve Katz
  • [BULK] - [Amps] Tempo Henry 2002 / FT-736R   David Vondrasek
• [Amps] Tempo Henry 2002 / FT-736R   David Vondrasek
• [Amps] AL-1500 pi-network capabilities   Will Matney
• [Amps] Magnet wire ratings   Will Matney
• [Amps] AL-1500 pi-network capabilities   Rob Atkinson, K5UJ
  • [Amps] AL-1500 pi-network capabilities   R.Measures
• [BULK] - [Amps] Tempo Henry 2002 / FT-736R   Steve Katz
• [Amps] 3-500Z grid driven -- TSPA   John T. M. Lyles
  • [Amps] 3-500Z grid driven -- TSPA   R.Measures
• [Amps] neg screen I in tetrodes-- TSPA   John T. M. Lyles
  • [Amps] neg screen I in tetrodes-- TSPA   Steve Thompson
    • [Amps] neg screen I in tetrodes-- TSPA   R.Measures
• [Amps] Magnet wire ratings (Correction)   Will Matney
• [Amps] How do I determine Class   Will Matney
  • [Amps] How do I determine Class   Bill Fuqua
  • [Amps] How do I determine Class   R.Measures
• [Amps] Audio BW -- Please just let us operate!!   tongaloa
• [Amps] AL-1500 pi-network capabilities   Rob Atkinson, K5UJ
• [Amps] AL-1500 pi-network capabilities   Will Matney
• [Amps] SELL: Misc. Amp Parts   w2cqm at juno.com
• [Amps] Question about low frequency tank coil forms?   Will Matney
  • [Amps] Question about low frequency tank coil forms?   jsb at digistar.com
    • [Amps] Question about low frequency tank coil forms?   Will Matney
• [BULK] - [Amps] Looking for perforated metal for final tank h ousing.   Steve Katz
• [Amps] Looking for perforated metal for final tank housing.   donii at sympatico.ca
• [Amps] Coil cooling for tubular coils.   Will Matney
  • [Amps] Coil cooling for tubular coils.   R.Measures
  • [Amps] Coil cooling for tubular coils.   Traian
    • [Amps] Coil cooling for tubular coils.   Will Matney
• [Amps] Coil cooling for tubular coils.   Harold B. Mandel
• [Amps] Re: AL-1500 pi-network capabilities   Rob Atkinson, K5UJ
• [Amps] coils   carl seyersdahl
  • [Amps] coils   R.Measures
• [Amps] SELL: Misc. Amp Parts   w2cqm at juno.com
• [Amps] Alpha Dials   Bob Kirkland
• [Amps] Henry 2KD-5 Schematic diagram   Sejo Sudic
• [Amps] ARRL Amplifier book   RICHARD GEORGE
  • [Amps] ARRL Amplifier book   R.Measures
  • [Amps] ARRL Amplifier book   Vic Rosenthal
    • [Amps] ARRL Amplifier book   Phil Clements
      • [Amps] ARRL Amplifier book   Pete Smith
      • [Amps] ARRL Amplifier book   Bill Coleman N2BC
      • [Amps] ARRL Amplifier book   Phil Clements
      • [Amps] ARRL Amplifier book   k7fm
• [Amps] Free or almost free chassis   Jim Isbell
• [Amps] re cooling of coils   CLIVE COLLINS
  • [Amps] re cooling of coils   Vic Rosenthal
    • [Amps] re cooling of coils   Traian
      • [Amps] re cooling of coils   Ian White, G3SEK
      • [Amps] re cooling of coils   R.Measures
• [Amps] re cooling of coils   Harold B. Mandel
• [Amps] Transceivers   Will Matney
• [Amps] ARRL Amplifier book   Will Matney
  • [Amps] ARRL Amplifier book   R.Measures
    • [Amps] RE: Perfect Amplifier   Randy
      • [Amps] RE: Perfect Amplifier   R.Measures
• [Amps] re cooling of coils   Will Matney
  • [Amps] re cooling of coils   R.Measures
    • [Amps] re cooling of coils   Will Matney
      • [Amps] open source RF Info was re cooling of coils   bb
      • [Amps] re cooling of coils   Ian White, G3SEK
      • [Amps] re cooling of coils   W0UN -- John Brosnahan
      • [Amps] re cooling of coils   Ian White, G3SEK
• [Amps] ARRL Amplifier book   Will Matney
• [Amps] Transceivers   Will Matney
  • [Amps] Transceivers   peter.chadwick at Zarlink.Com
    • [Amps] Transceivers   Will Matney
      • [Amps] Transceivers   peter.chadwick at Zarlink.Com
  • [Amps] FL2000/QB4 or FL2100/qb4   Emilio Augusto Hass
• [Amps] re cooling of coils   Dan
  • [Amps] re cooling of coils   peter.chadwick at Zarlink.Com
• [Amps] Amps 101 was re cooling of coils   Rick Bullon
• [Amps] Re: re cooling of coils (Ian White, G3SEK)   Will Matney
  • [Amps] Re: re cooling of coils (Ian White, G3SEK)   Ian White, G3SEK
• [Amps] open source RF Info was re cooling of coils   Will Matney
• [Amps] SK300 socket   Traian
  • [Amps] SK300 socket   R.Measures
• [Amps] ] Amps 101   Harold B. Mandel
• [Amps] New Panasonic Tube Radio   Harold B. Mandel
• [Amps] re cooling of coils   Harold B. Mandel
  • [Amps] Amps 101 article   Mike D.
• [Amps] Quiet Cooling   Harold B. Mandel
  • [Amps] Quiet Cooling   K7RDX
  • [Amps] Quiet Cooling   R.Measures
• [Amps] re cooling of coils   Harold B. Mandel
• [Amps] cooling of coils   Harold B. Mandel
  • [Amps] cooling of coils   R.Measures
• [Amps] GRT-22 manual   Werner Hasemann
• [Amps] Re: Amp Tutor 101.com   Will Matney
• [Amps] FS: BIG variable capacitors and Inductors   Michael Melland, W9WIS
• [Amps] New Panasonic Tube Radio   bb
• [Amps] Quiet Cooling   Will Matney
  • [Amps] Quiet Cooling   k7fm
  • [Amps] Quiet Cooling   scm
  • [Amps] Quiet Cooling   John Vickers
• [Amps] New Panasonic Tube Radio   Will Matney
  • [Amps] New Panasonic Tube Radio   bb
  • [Amps] New Panasonic Tube Radio   Barrie Smith
    • [Amps] New Panasonic Tube Radio   RICHARD GEORGE
      • [Amps] New Panasonic Tube Radio   bb
      • [Amps] New Panasonic Tube Radio   Barrie Smith
      • [Amps] New Panasonic Tube Radio   Vic Rosenthal
• [Amps] New Panasonic Tube Radio   wb8jkr at juno.com
• [Amps] New Panasonic Tube Radio   wb8jkr at juno.com
  • [Amps] New Panasonic Tube Radio   bb
  • [Amps] New Panasonic Tube Radio   Barrie Smith
  • [Amps] New Panasonic Tube Radio   Ian White, G3SEK
  • [Amps] New Panasonic Tube Radio   Traian
• [Amps] New Panasonic Tube Radio The impossible perfect amp   donii at sympatico.ca
  • [Amps] New Panasonic Tube Radio The impossible perfect amp   on4kj
• [Amps] Plate Load Impedance   David C. Hallam
  • [Amps] Plate Load Impedance   Phil Clements
• [Amps] Quiet Cooling   Will Matney
• [Amps] New Panasonic Tube Radio   Will Matney
  • [Amps] New Panasonic Tube Radio   Mark - AA6DX
• [Amps] New Panasonic Tube Radio   Harold B. Mandel
  • [Amps] New Panasonic Tube Radio   R.Measures
• [Amps] Quiet Cooling   Will Matney
• [Amps] WLW (Whata Lotta Watts)   Will Matney
• [Amps] Plate Load Impedance   Will Matney
• [Amps] New Panasonic Tube Radio   Skram, Helge (MED)
• [Amps] Plate Load Impedance   TexasRF at aol.com
  • [Amps] Plate Load Impedance   David C. Hallam
• [Amps] SELL: Filament Transformers   w2cqm at juno.com
• [Amps] New Panasonic Tube Radio   Will Matney
• [Amps] Website for QRO stuff   Will Matney
  • [Amps] Website for QRO stuff   jeff millar
• [Amps] Website for QRO stuff   Will Matney
• [Amps] Links on the amps reflector   Will Matney
• [Amps] Re: The QRO website   Will Matney
• [Amps] Correction for QRO Website   Will Matney
  • [Amps] QRO Website   lncarman SWBELL
• [Amps] a 'circuits' question   Dan Sawyer
  • [Amps] a 'circuits' question   Steve Thompson
    • [Amps] a 'circuits' question   Dan Sawyer
      • [Amps] a 'circuits' question   Steve Thompson
      • [Amps] a 'circuits' question   Dan Sawyer
• [Amps] Correction for QRO Website   Will Matney
• [BULK] - [Amps] 2m Linear Amp Enquiry   Steve Katz
  • [BULK] - [Amps] 2m Linear Amp Enquiry   Steve Thompson
    • [BULK] - [Amps] 2m Linear Amp Enquiry   Steve Thompson
      • [BULK] - [Amps] 2m Linear Amp Enquiry   Ian White, G3SEK
      • [BULK] - [Amps] 2m Linear Amp Enquiry   R.Measures
• [Amps] 2m Linear Amp Enquiry   David King
  • [Amps] 2m Linear Amp Enquiry   Jerry Muller
    • [Amps] 2m Linear Amp Enquiry   jeff millar
• [Amps] L7 + FT1000 Mark V???   Fernando EC1CWG
• [Amps] Plate Load Impedance   Will Matney
• [Amps] rolling your own roller inductors help   mike kendall
• [Amps] PWD XFMRS STILL TOPS   Harold B. Mandel
• [Amps] ARCO compression trimmer caps   Bill Turner
  • [Amps] ARCO compression trimmer caps   Paul Christensen
  • [Amps] ARCO compression trimmer caps   W0UN -- John Brosnahan
• [Amps] ARCO compression trimmer caps   Radio WC6W
  • [Amps] ARCO compression trimmer caps   Paul Christensen
  • [Amps] ARCO compression trimmer caps   Vic Rosenthal
  • [Amps] ARCO compression trimmer caps   Bill Turner
• [Amps] Dipped Mica Caps   W0UN -- John Brosnahan
  • [Amps] Dipped Mica Caps   George Hall
• [Amps] ARCO compression trimmer caps   TexasRF at aol.com
• [Amps] Dipped Mica Caps   TexasRF at aol.com
• [Amps] ARCO compression trimmer caps   Harold B. Mandel
• [Amps] Dipped Mica Caps   Harold B. Mandel
• [Amps] Panasonic tube radio   Rob Atkinson, K5UJ
  • [Amps] Panasonic tube radio   lncarman
  • [Amps] Panasonic tube radio   Bill Turner
    • [Amps] Panasonic tube radio   Jason Buchanan
      • [Amps] Panasonic tube radio   peter.chadwick at Zarlink.Com
      • [Amps] Panasonic tube radio   Bill Turner
      • [Amps] Panasonic tube radio   Jim Isbell
      • [Amps] Panasonic tube radio   Crawfish
• [Amps] ARCO compression trimmer caps   Radio WC6W
  • [Amps] ARCO compression trimmer caps   Arthur Moe
  • [Amps] ARCO compression trimmer caps   W0UN -- John Brosnahan
• [Amps] tube radio   Harold B. Mandel
• [Amps] Harris RF-110A on E-Bay   Phil Clements
• [Amps] Vacuum Capacitor FS   Court
• [Amps] 10KW Dummy Load   Tony King
  • [Amps] 10KW Dummy Load   RICHARD GEORGE
• [Amps] ARCO compression trimmer caps   Will Matney
• [Amps] Questions about Amp Supply LK-450   Keith E. Spainhour
  • [Amps] Questions about Amp Supply LK-450   R.Measures
    • [Amps] Questions about Amp Supply LK-450   Keith E. Spainhour
      • [Amps] Questions about Amp Supply LK-450   R.Measures
    • [Amps] Questions about Amp Supply LK-450   Keith E. Spainhour
• [Amps] Questions about Amp Supply LK-450   Will Matney
• [Amps] Panasonic tube radio   Will Matney
• [Amps] AM-6154 questions   Web Williams
  • [Amps] AM-6154 questions   pmills7 at houston.rr.com
  • [Amps] AM-6154 questions   RICHARD GEORGE
    • [Amps] AM-6154 questions   KY1K
      • [Amps] AM-6154 questions   Web Williams
      • [Amps] AM-6154 questions   RICHARD GEORGE
      • [Amps] AM-6154 questions   Chris Cox, N0UK
  • [Amps] AM-6154 questions   WA2BPE
• [Amps] Re: ARCO compression trimmer caps - I Use Tinnerman Nuts   Dennis12Amplify at aol.com
  • [Amps] Re: ARCO compression trimmer caps - I Use Tinnerman Nuts   Bill Turner
• [Amps] Panasonic tube radio   Will Matney
• [Amps] Johnson 275 Sockets   Jeff Weinberg W8CQ
• [Amps] Panasonic tube radio   donii at sympatico.ca
• [Amps] tube glowed red when grid resister blew on sb-220   Dan Sawyer
  • [Amps] tube glowed red when grid resister blew on sb-220   R.Measures
• [Amps] Recommend supplier for aluminum sheet?   Bill Turner
  • [Amps] Recommend supplier for aluminum sheet?   R.Measures
  • [Amps] Recommend supplier for aluminum sheet?   Bill Fuqua
    • [Amps] Recommend supplier for aluminum sheet?   Harry Brown
    • [Amps] Recommend supplier for aluminum sheet?   Tony King
• [Amps] Recommend supplier for aluminum sheet?   donii at sympatico.ca
• [Amps] AM-6154 questions   Will Matney
• [Amps] tube glowed red when grid resister blew on sb-220   Will Matney
• [Amps] Recommend supplier for aluminum sheet?   Will Matney
• [Amps] Recommend supplier for aluminum sheet?   TexasRF at aol.com
• [Amps] Alpha76A Multimeter - Postscript - long post   Don Nesbitt
  • [Amps] Alpha76A Multimeter - Postscript - long post   Bill Turner
    • [Amps] Alpha76A Multimeter - Postscript - long post   Don Nesbitt
• [Amps] RE: Amps Digest, Vol 21, Issue 33   David Robinson
• [Amps] Aluminum   kd4lyh at bellsouth.net
• [Amps] Aluminum   kd4lyh at bellsouth.net
• [Amps] AM-6154 questions   Harold B. Mandel
• [Amps] Part needed   Will Matney
• [Amps] 2m Linear Amp Enquiry   Skram, Helge (MED)
  • [Amps] 2m Linear Amp Enquiry   Steve Thompson
• [Amps] AM-6154 questions   craxd
  • [Amps] AM-6154 questions   Joe Isabella
• [Amps] AM-6154 questions   JMLTINC at aol.com
  • [Amps] AM-6154 surplus found   David Vondrasek
    • [Amps] AM-6154 surplus found   David Vondrasek
• [Amps] Heater chokes on 1/2" ferrite   Thomas Hoeppe
  • [Amps] Heater chokes on 1/2" ferrite   R.Measures
• [Amps] SELL: B&W 850A 10-160m 2KW Tank/Bandswitch Assembly   w2cqm at juno.com
• [Amps] output ckts.   carl seyersdahl
  • [Amps] output ckts.   Vic Rosenthal
  • [Amps] output ckts.   Arthur Moe
    • [Amps] output ckts.   Barry Kirkwood
• [Amps] Transformers   craxd
• [Amps] output ckts.   Radio WC6W
• [AMPS] floating a filament transformer   lncarman
  • [AMPS] floating a filament transformer   Bill Turner
  • [AMPS] floating a filament transformer   R.Measures
    • [AMPS] floating a filament transformer   jsb at digistar.com
      • [AMPS] floating a filament transformer   Phil Clements
      • [AMPS] floating a filament transformer   carl seyersdahl
      • [AMPS] floating a filament transformer   Vic Rosenthal
      • [AMPS] floating a filament transformer   R.Measures
• [Amps] input matching question on the YC156?   Neil Carr G0JHC
  • [Amps] input matching question on the YC156?   Steve Thompson
  • [Amps] input matching question on the YC156?   Vic Rosenthal
  • [Amps] input matching question on the YC156?   Leigh S. Jones
    • [Amps] input matching question on the YC156?   Leigh S. Jones
    • [Amps] input matching question on the YC156?   Neil Carr G0JHC
    • [Amps] input matching question on the YC156?   R.Measures
      • [Amps] input matching question on the YC156?   Neil Carr G0JHC
    • [Amps] input matching question on the YC156?   Bill Turner
      • [Amps] input matching question on the YC156?   Phil Clements
      • [Amps] input matching question on the YC156?   Leigh S. Jones
• [Amps] input matching question on the YC156?   craxd
• [Amps] 3 amps for sale   dan r goddard
  • [Amps] 3 amps for sale   Bob Bruno - K2KI
• [AMPS] floating a filament transformer   craxd
• [Amps] Secondary emission in Screen grids   John T. M. Lyles
  • [Amps] Secondary emission in Screen grids   R.Measures
• [Amps] input matching question on the YC156?   craxd
  • [Amps] input matching question on the YC156?   K7RDX
• [Amps] Applying HV to PA anodes   Harold B. Mandel
  • [Amps] Applying HV to PA anodes   Phil Clements
    • [Amps] Applying HV to PA anodes   daniel hearn
• [Amps] Applying HV during Warmup   Harold B. Mandel
  • [Amps] Applying HV during Warmup   Bill Turner
• [BULK] - Re: [Amps] Applying HV during Warmup   Steve Katz
  • [BULK] - Re: [Amps] Applying HV during Warmup   Joe Isabella
    • [BULK] - Re: [Amps] Applying HV during Warmup   Jim Isbell
• [Amps] input matching question on the YC156?   Harold B. Mandel
  • [Amps] input matching question on the YC156?   craxd
• [Amps] Help - Frontier   Terry
• [BULK] - RE: [BULK] - Re: [Amps] Applying HV during Warmup   Steve Katz
• [Amps] Amp Sale   dan r goddard
• [Amps] Help - Frontier   Harold B. Mandel
• [Amps] input matching question on the YC156?   craxd
  • [Amps] input matching question on the YC156?   DF3KV
• [Amps] Web address corrected   dan r goddard
• [Amps] input matching question on the YC156?   Harold B. Mandel
• [Amps] Applying HV to PA anodes   Harold B. Mandel
• [Amps] Tl 922 fan   GGLL
• [Amps] Re: Amps Digest, Vol 21, Issue 44   David Lisney
• [Amps] Equalising resistors with HV diodes   Roger B
  • [Amps] Equalising resistors with HV diodes   bb
  • [Amps] Equalising resistors with HV diodes   R.Measures
• [Amps] input matching question on the YC156?   craxd
• [Amps] input matching question on the YC156?   craxd
• [Amps] Dentron GLA1000B   bb
• [Amps] Dentron GLA1000B   bb
• [Amps] Getting Filament Voltage on an AL-82   crnovak at hawkpci.net
  • [Amps] Getting Filament Voltage on an AL-82   Bill Turner
    • [Amps] Getting Filament Voltage on an AL-82   Steve Thompson
      • [Amps] Getting Filament Voltage on an AL-82   Bill Turner
      • [Amps] Getting Filament Voltage on an AL-82   Paul Christensen
      • [Amps] GLA-1000 Boards   bb
      • [Amps] GLA-1000 Boards   Carlos Avellanet [KF4RRN]
• [Amps] Collins 30L-1 / 572's B   Javier Remoto
  • [Amps] Collins 30L-1 / 572's B   Vic Rosenthal
    • [Amps] Collins 30L-1 / 572's B   w4oae at comcast.net
      • [Amps] Collins 30L-1 / 572's B   Crawfish
      • [Amps] Collins 30L-1 / 572's B   Don Nesbitt
    • [Amps] Collins 30L-1 / 572's B   K2DP
  • [Amps] Collins 30L-1 / 572's B   R.Measures
    • [Amps] Collins 30L-1 / 572's B   k7fm
      • [Amps] Collins 30L-1 / 572's B   R.Measures
• [Amps] amplifier resource page   Rick Bullon
• [Amps] Equalising resistors with HV diodes   Radio WC6W
  • [Amps] Equalising resistors with HV diodes   R.Measures
    • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   DF3KV
      • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   DF3KV
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   Steve Thompson
      • [Amps] Equalising resistors with HV diodes   R.Measures
      • [Amps] Equalising resistors with HV diodes   Steve Thompson
      • [Amps] Equalising resistors with HV diodes   Traian
      • [Amps] Equalising resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Equalising resistors with HV diodes   R.Measures
• [Amps] On Thu, 16 Sep 2004 21:54:56 -0700, Leigh S. Jones wrote: >rule 1: never apply plate voltage to the tube nor apply drive power >until after the prescribed filament warm-up period has elapsed _________________kill the B- lead for the HV   Angel Vilaseca
• [Amps] 4cx800 for vhf   kc4mne at bellsouth.net
• [Amps] B- switching.   craxd
• [Amps] Equalising resistors with HV diodes   Radio WC6W
  • [Amps] Equalising resistors with HV diodes   R.Measures
  • [Amps] Equalising resistors with HV diodes   bb
    • [Amps] Equalising resistors with HV diodes   Bill Turner
    • [Amps] Equalising resistors with HV diodes   R.Measures
• [Amps] Equalising resistors with HV diodes   Radio WC6W
• [Amps] Need power supply info.   Bill Fuqua
• [Amps] Grt 22 infos   Werner Hasemann
• [Amps] Equalising resistors with HV diodes   Radio WC6W
  • [Amps] Equalising resistors with HV diodes   Ian White, G3SEK
• [Amps] Getting Filament Voltage on an AL-82   crnovak at hawkpci.net
• [Amps] Equalising resistors with HV diodes   TexasRF at aol.com
  • [Amps] Equalising resistors with HV diodes   R.Measures
    • [Amps] Equalising resistors with HV diodes   Joe Isabella
• [Amps] Equalising resistors with HV diodes   Radio WC6W
  • [Amps] Equalising resistors with HV diodes   hermans
• [Amps] Re: Equalizing resistors with HV diodes   Dave Haupt
  • [Amps] Re: Equalizing resistors with HV diodes   R.Measures
  • [Amps] Re: Equalizing resistors with HV diodes   Dr. David Kirkby
    • [Amps] Re: Equalizing resistors with HV diodes   peter.chadwick at Zarlink.Com
      • [Amps] Re: Equalizing resistors with HV diodes   Traian
      • [Amps] Re: Equalizing resistors with HV diodes   Ian White, G3SEK
      • [Amps] Re: Equalizing resistors with HV diodes   R.Measures
• [Amps] Equalising resistors with HV diodes   Radio WC6W
• [Amps] James Millen Variable Capacitor   David C. Hallam
  • [Amps] James Millen Variable Capacitor   Vic Rosenthal
    • [Amps] James Millen Variable Capacitor   hermans
• [Amps] Equalising resistors with HV diodes   Radio WC6W
  • [Amps] Equalising resistors with HV diodes   R.Measures
• [BULK] - [Amps] AL1200   Steve Katz
• [Amps] AL1200   K9RT at aol.com
  • [Amps] AL1200   Joe Isabella
  • [Amps] AL1200   Bill Turner
    • [Amps] AL1200   R.Measures
  • [Amps] AL1200   kenw2dtc
• [BULK] - [Amps] Equalising resistors with HV diodes   Steve Katz
  • [BULK] - [Amps] Equalising resistors with HV diodes   Joe Isabella
• [Amps] Equalising resistors with HV diodes   R.Measures
• [Amps] upcoming CPI/Eimac move --- TSPA   John T. M. Lyles
  • [Amps] upcoming CPI/Eimac move --- TSPA   Bill Coleman N2BC
    • [Amps] upcoming CPI/Eimac move   John T. M. Lyles
• [Amps] AL1200   craxd
• [BULK] - RE: [BULK] - [Amps] Equalising resistors with HV dio des   Steve Katz
• [Amps] Re: Amps Digest, Vol 21, Issue 56   K3vw at aol.com
• [Amps] AL1200   Harold B. Mandel
• [Amps] 20kw Dummy load?   R.Measures
• [Amps] upcoming CPI/Eimac move --- TSPA   Harold B. Mandel
• [Amps] 20kw Dummy load?   Harold B. Mandel
  • [Amps] 20kw Dummy load?   Tony King
• [Amps] working out plate impedance for pi-network   Ian swain
• [Amps] Transformer steel   craxd
• [Amps] 20kw Dummy load?   Steve Thompson
• [Amps] 20kw Dummy load?   DF3KV
• [Amps] Line Sections As Plate Lines   JMLTINC at aol.com
  • [Amps] Line Sections As Plate Lines   jeff millar
  • [Amps] Line Sections As Plate Lines   jeff millar
• [Amps] Equalizing Epilogue   R.Measures
• [Amps] 20kw Dummy load?   craxd
• [Amps] Line Sections As Plate Lines   craxd
• [Amps] 20kw Dummy load?   Dr. David Kirkby
  • [Amps] 20kw Dummy load?   DF3KV
    • [Amps] 20kw Dummy load?   Michael Tope
      • [Amps] 20kw Dummy load?   R.Measures
      • [Amps] 20kw Dummy load?   lncarman
      • [Amps] 20kw Dummy load?   k7fm
      • [Amps] 20kw Dummy load?   Michael Tope
      • [Amps] 20kw Dummy load?   R.Measures
• [Amps] Line Sections As Plate Lines   craxd
  • [Amps] Line Sections As Plate Lines   jeff millar
• [Amps] Line Sections As Plate Lines   craxd
• [Amps] working out plate impedance for pi-network   David C. Hallam
• [Amps] Line Sections As Plate Lines   JMLTINC at aol.com
  • [Amps] Line Sections As Plate Lines   jeff millar
• [Amps] Dummy loads   Bill Coleman N2BC
• [Amps] Design for plate stripline for 144 MHZ   kc4mne at bellsouth.net
  • [Amps] Design for plate stripline for 144 MHZ   jeff millar
• [Amps] Vacuum Variable Capacitors   David C. Hallam
• [Amps] 20kw Dummy load?   Harold B. Mandel
  • [Amps] 20kw Dummy load?   R.Measures
• [Amps] 20kw Dummy load?   craxd
• [Amps] 20kw Dummy load?   Dr. David Kirkby
• [Amps] Alpha 76   Bob Kirkland
• [Amps] Non-inductive resistors   craxd
  • [Amps] Non-inductive resistors   R.Measures
    • [Amps] Non-inductive resistors   craxd
      • [Amps] Non-inductive resistors   Michael Tope
      • [Amps] Non-inductive resistors   craxd
• [Amps] Need a variable capacitor   Bill Turner
• [Amps] Need a variable capacitor   craxd
• [Amps] SELL: Kilovac 115VDC SPST Vacuum Relay   Ronald Lumachi
• [Amps] FS: Serious plate transformer   Jack/AE7DX
• [Amps] Non-inductive resistors   craxd
  • [Amps] Non-inductive resistors   Michael Tope
• [Amps] help with Collins amp ID   w9ge
  • [Amps] help with Collins amp ID   Karl-Arne Markström
• [Amps] Going price for SB-1000/AL80A?   Scott Manthe
• [Amps] Non-inductive resistors   craxd
• [Amps] Re: [CQ-Contest] Robots   DF3KV
• [Amps] SELL: Transformer Assortment   Ronald Lumachi
• [Amps] Wanted: Mod transformer   jeg
• [Amps] Non-inductive resistors   craxd
  • [Amps] Non-inductive resistors   Bill Fuqua
    • [Amps] Non-inductive resistors   craxd
• [Amps] Bird Pricing   Marv Gonsior

Last message date: Wed Sep 29 16:48:12 EST 2004
Archived on: Wed Sep 29 16:41:33 EST 2004

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...