[Amps] ARCO compression trimmer caps

[Vic Rosenthal]

Radio WC6W wrote:


>    Sounds like you are dealing with a type 30 padder.
> 
>    Your friend is correct about the size.   The thread is standard,
> albeit rare.

I have thought about (but haven't tried) getting a slightly smaller (but 
common) die and just rethreading the sleeve on the trimmers (I have some 
without the nuts also).  The sleeve is brass, so it shouldn't be too hard.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco