[Amps] 4K Ultra Restoration

[Bob Maser]

Thanks to all who have responded so far.  Does anyone have a spare service 
manual for the 4K Ultra?  If you have a service manual and would be willing 
to have it duplicated I would gladly pay all the costs.

Bob
----- Original Message ----- 
From: "Phil Clements" <philc at texascellnet.com>
To: "'Bob Maser'" <bmaser at tampabay.rr.com>; "'AMPS'" <amps at contesting.com>
Sent: Sunday, December 04, 2005 3:22 PM
Subject: Re: [Amps] 4K Ultra Restoration


>> Can someone tell me what was the original blower used in the 4KU? 
>> Looking
>> at the Grainger catalog, it looks like the only one they sell that could
>> possibly work is the Dayton 4C869, which is 230VAC @ 1600 RPM but I'm not
>> sure of the opening size match.
>
> The blower # in the 4-K manual is Henry part #00 49101. It is rated at 325
> cfm. It is a 230 volt 1500 rpm unit.
>> The amp was operational when I first saw it about a month ago although it
>> took about 100W to get 1500W out of it so I am going to have to replace
> the 8877.
>
> The ones I have repaired/operated did 2200 watts with 65 watts drive. If 
> the
> tracking has gone out of adjustment, this would cause low output. You will
> need a service manual to properly adjust all the coils/capacitors to track
> properly from 3-30 mhz. This is not difficult but a little time consuming.
>
> (((73)))
> Phil Clements, K5PC
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps