[Amps] Want to build first amp

[engelen.jan]

Will,

I bought my first GS35 trafo in germany from a guy that makes them on
demand. He also delivered a 12,6volt trafo for the heater, a control
board and a diode board along with it. I don´t think that he´s selling
many of those. I made a second version with an old military dump trafo
and a homebrew timing and alarm board. This is easy to build an not so
expensive as some boards I saw on the internet.

My first HV trafo is forsale together with everything needed to built
the complete supply for a gs35b. No response yet, it´s been on the net
for 2 months now.
300 euro´s for a kit is to much I guess ... I paid 450 euro´s 

73 Jan.

-----Oorspronkelijk bericht-----
Van: Will Matney [mailto:craxd1 at ezwv.com] 
Verzonden: donderdag 20 januari 2005 16:30
Aan: engelen.jan
Onderwerp: Re: [Amps] Want to build first amp

This brings me to a question. How much interest would there be in  
pre-built plate supplies? They could either have the plate alone or have

the screen-bias, and heater supply included. This way the builder would

only have to build up the tube deck. I wonder if these would be
sellable?

Will



On Thu, 20 Jan 2005 12:05:52 +0100, engelen.jan <engelen.jan at skynet.be>

wrote:

> Tony is right about this one, I´m building a gs35b HF amplifier, I
> allread made a 6meter, 2meter and 70cm amp with this tube.
> My HF amp is almost done, only the input circuit has to be made, and
the
> taps on the L have to be connected to the band switch.
> The easy part is the common HV supply. With a separate metering
cabinet.
> The trafo is sitting under the desk, and the cavity is on a shelf. The
> metering is right in front of me. If you are interested in some pics,
> let me know.
> 73 Jan, ON6ZG
>
>> I agree too. It is very ambitious to attempt to cover 6 meters within
>> your 160-10 meter amp. Switching and layout become a major concern.
The
>
>> simplicity of a GS-35B triode G-G amp makes it very appealing to
build
>> six meters as a second amp. You can do this and use one HV supply for
>> both. Cost of components is small for an add-on single band amp once
> you
>> have the HF deck and HV power supply complete.  73, Tony W4ZT
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> __________ NOD32 1.880 (20040928) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.nod32.com
>
>



-- 
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/