[Amps] [BULK] - Fabricating Chimneys from Gasket Material

Steve Katz stevek at jmr.com
Mon May 2 12:38:07 EDT 2005


Why not just use high temp silicon rubber, wrapped around the tube and held
in place with a stainless steel hose clamp?  I've been doing that for about
25 years...got the idea from my first Alpha.  -WB2WIK/6

-----Original Message-----
From: w2cqm at juno.com [mailto:w2cqm at juno.com]
Sent: Monday, May 02, 2005 9:31 AM
To: Amps at contesting.com
Subject: [BULK] - [Amps] Fabricating Chimneys from Gasket Material


Need some assistance ! I'd like to experiment  fabricating  some small
chimneys for a ceramic tube from heavy machinery gauge, nonmetallic head
gasket material I have at hand.   The plan is to  snugly wrap the
material around the tube body (like a skirt)  with a small overlap and
them drill small pilot  holes and secure it with hand stitches. The
Question! Is anyone aware of any  automotive hardening  "gasket seal" 
material that can be used  in the overlap as an added bonding  that will
withstand the heat and maintain the circular   integrity of the chimney ?
Any suggestions would be appreciated. Ron W2CQM/3 
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps


More information about the Amps mailing list