[Amps] Dedicated 220AC Wiring for Amps..

[Gary Smith]

Hi Monty and all.
In case you haven't figured out "how-to-do-it," I drove my ground rod into the Terra 
Firma buy placing a 3" pipe nipple with a cap on it over the end of the ground rod. 
  Then I stood on a step ladder and laid into the the pipe cap with a 5 lb. maul. 
Task took all of 10 mins or so to accomplish sinking all save for six inches or so 
of the rod into the dirt. Purists may wince at my next solution ,but... I used an 
old piece of RG-8 with the center conductor tied to the shield to make the run into 
the the shack.  So far, this has kept the stray RF gremlins at bay.
Just thought I'd pass this idea on to you.
73.
Gary...wa6fgi since day one, circa 1968

monty taylor wrote:
> Gents,
> 
> Thanks for all the replies.  As a result I will RF ground outside my
> windows today as I already have the 8 foot rod ready to go.  I will also
> run a #6 copper wire back to my main breaker box as an AC ground per the
> new code.  I happen to have 250 feet of #6 that I was going to use for
> other purposes and it will be easy to run.
> 
> Regards,
> Monty/WB5GLB since 1969
> 
> 
> 
>