[Amps] Best RF-Ground Story

[Bob Nielsen]

I think that must have been in an April issue.  Could the author  
possibly have been Larson E. Rapp, WIOU?

Bob, N7XY

On Oct 15, 2005, at 7:08 AM, Mike Sawyer wrote:

> I remember along time ago when I was still naive, reading an  
> article in that
> 'Q' magazine about loading into well casings. The idea was that it  
> worked
> just like a vertical but instead of the radiating element in the  
> air, it was
> in the ground. The thought was that the 'mirror' of the RF wave  
> would be
> generated above ground. I guess they did have some success with it.  
> However,
> its a far cry from the analogy you quoted.
> P.T. Barnum was right, "No one ever went broke under-estimating the
> intelligence of the American public!"
> Mike(y)
> W3SLK
> ----- Original Message -----
> From: "R.Measures" <r at somis.org>
> To: "AMPS" <amps at contesting.com>
> Sent: Saturday, October 15, 2005 9:12 AM
> Subject: [Amps] Best RF-Ground Story
>
>
> I heard this One one evening on 160m:
>
> The absolutely, positively best possible RF ground for receiving 160m
> DX signals from Europe is a steel waterwell casing 1/2-wave deep (c.
> 250').  According to the owner of such a waterwell casing, DX signals
> on 160m travel deep in the Earth as electrical currents.  When such
> currents encounter a resonant conductor, they are sucked upward to the
> surface.  The 1/2 wave conductor is apparently essential for this
> application since it acts as  a Z-matcher and a signal catcher.
>
> It is my opinion that the owner of said water well had not been
> drinking water on the evening when he related the above story.
>
> Richard L. Measures, AG6K, 805.386.3734.  www.somis.org
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>