[Amps] Mobile high power

Joe Isabella n3ji at yahoo.com
Thu Oct 27 13:38:20 EDT 2005


I wouldn't mind an alternator upgrade -- send me what you have...
 
Thanks!!
Joe
 

HAROLD B MANDEL <ka1xo at juno.com> wrote:
If anyone is interested I can supply the name of a supplier of really
heavy duty alternators, single or triple phase, as direct replacements
for OEM products.

One application I saw used seven units and a custom serpentine belt
connected to a Dodge Hemi engine that did nothing but drive the
alternators at 6,000 RPM.

Hal
W4HBM


On Thu, 27 Oct 2005 13:08:45 -0400 "Will Matney" 
writes:
> Dick,
> 
> Yea, there was some mobile tube manufacturers who used to supply a 
> generator with the amp. It supplied like 115/230 Vac 3 phase to a 
> transformer. There were some that took alternators and removed the 
> rectifiers getting around 14-18 Vac three phase or so. They fed a 
> transformer this way but you have to run big cable. They have some 
> generators for 115/230 at Northern Hydraulics which can be mounted 
> with a pulley and will do the same think. I'm not sure what there 
> KVA rating is though. These are single phase if I recall. There some 
> of these being made today I know about. The good thing is, this 
> keeps one from having to use an inverter circuit off 13.8 Vdc. 
> Inverters are ok for small tube amps, but for anything say over 500+ 
> watts, I'd want to use a generator.
> 
> Best,
> 
> Will
> 
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps

		
---------------------------------
 Yahoo! FareChase - Search multiple travel sites in one click.  


More information about the Amps mailing list