[Amps] 4-1000

[Rich]

Jack, if and when your get good information on a 4-1000 amp I sure could
use a picture or two of the input/output relay set up, I have seen it on
a schematic where the input is on the far left and the out put is always
on the far right but can some one show this dummy how they look in real
life. I have completed my power supply and all is fine with it and I am
ready to start my RF deck. The only parts I have are the tube (and
extras), socket, chimney, filament trans and fil choke and plate and
load variable cap. 
I will start out with a 40m monobander. I am trying to keep the low
priced until I get it working in my mind, then will look for a B&W650A
and go 15-20 and 40.
	Rich, kd0zz



Today's Topics:

   1. Looking for someone in Fla that knows alot about 4-1000 amps?
      (Jack)


----------------------------------------------------------------------

Message: 1
Date: Sat, 10 Sep 2005 22:57:17 -0400
From: Jack <videorov at direcway.com>
Subject: [Amps] Looking for someone in Fla that knows alot about
	4-1000 amps?
To: amps at contesting.com
Message-ID: <000601c5b67c$883323e0$0100a8c0 at internet>
Content-Type: text/plain; charset=iso-8859-1



------------------------------

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps


End of Amps Digest, Vol 33, Issue 17
************************************