[Amps] Meter Res.

peter.voelpel df3kv at t-online.de
Tue Jan 10 16:03:06 EST 2006


I have the impression that will be used
for a ht-meter circuit, that can´t be done with a normal
resistor, a 5kv type will be required, the 5x1M Ohm might do it
if they are spezified to handle 500V each

73
Peter

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Dr. David Kirkby
Sent: Dienstag, 10. Januar 2006 21:54
To: Ron Spencer; amps at contesting.com
Subject: Re: [Amps] Meter Res.

Ron Spencer wrote:
> Does anyone know where I can buy one  or have a 5 Meg Resister I need one
to go in a meter Circuit. I have 5 - 1 Meg but I don't what to make a PCP to
put them on.
> 
> Ron Spencer
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
Two possible solutions

1) Resistors in the E96 range are farily easy to come by (RS in the UK 
is one example). There you can get 4.99 M Ohm as a standard value.

See

http://industrial.panasonic.com/www-data/pdf/AOA0000/AOA0000PE1.pdf

for a list of resistors in the E96 range.

2) Two 10 M Ohm resistors in parallel.


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps



More information about the Amps mailing list