January 2006 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jan 1 00:08:13 EST 2006
Ending: Tue Jan 31 22:32:49 EST 2006
Messages: 784

• [Amps] Air Varible   Ron Spencer
  • [Amps] Air Varible   David C. Hallam
• [Amps] How about this furnace?   Robert Chudek
  • [Amps] How about this furnace?   Mike Sawyer
    • [Amps] How about this furnace?   crawfish
      • [Amps] How about this furnace?   crawfish
      • [Amps] How about this furnace?   bob finger
      • [Amps] How about this furnace?   Joe Isabella
      • [Amps] How about this furnace?   R.Measures
      • [Amps] How about this furnace?   Larry N. Carman
      • [Amps] RE : How about this furnace?   hermans
      • [Amps] RE : How about this furnace?   R.Measures
• [Amps] Russian Capacitor   Ivan Makarov
• [Amps] Fw: How about this furnace?   N7HIY
  • [Amps] Fw: How about this furnace?   Peter Voelpel
  • [Amps] Fw: How about this furnace?   Bill Aycock
    • [Amps] Fw: How about this furnace?   Jason Buchanan
    • [Amps] Fw: How about this furnace?   Artmouton
      • [Amps] Fw: How about this furnace?   k0dan
      • [Amps] Fw: How about this furnace?   Sam W4OAE
      • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   crawfish
      • [Amps] How about this furnace?   Joe Isabella
      • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   PA3DUV
      • [Amps] How about this furnace?   Joe Isabella
      • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   Joe Isabella
      • [Amps] How about this furnace?   m.ford
      • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   m.ford
      • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   R.Measures
      • [Amps] How about this furnace?   crawfish
      • [Amps] How about this furnace?   R.Measures
  • [Amps] Fw: How about this furnace?   Mike Sawyer
• [Amps] Amps Digest, Vol 37, Issue 1   almacottage
• [Amps] How about this furnace?   w6ah at comcast.net
• [Amps] Parasitic suppressor resistor   Bill Turner
  • [Amps] Parasitic suppressor resistor   gdaught6 at stanford.edu
    • [Amps] Parasitic suppressor resistor   Bill Turner
  • [Amps] RE : Parasitic suppressor resistor   hermans
    • [Amps] RE : Parasitic suppressor resistor   R.Measures
      • [Amps] Parasitic suppressor resistor   Bill Turner
      • [Amps] Parasitic suppressor resistor   Steve Thompson
      • [Amps] Parasitic suppressor resistor   R.Measures
      • [Amps] Parasitic suppressor resistor   Steve Thompson
      • [Amps] Parasitic suppressor resistor   R.Measures
      • [Amps] Parasitic suppressor resistor   Steve Thompson
      • [Amps] Parasitic suppressor resistor   Bill Turner
      • [Amps] Parasitic suppressor resistor   Steve Thompson
      • [Amps] Parasitic suppressor resistor   Bill Turner
      • [Amps] Parasitic suppressor resistor   R.Measures
      • [Amps] Parasitic suppressor resistor   Bill Turner
  • [Amps] Parasitic suppressor resistor   Phil Clements
  • [Amps] Parasitic suppressor resistor   Bill Aycock
    • [Amps] Parasitic suppressor resistor   Bill Turner
      • [Amps] Parasitic suppressor resistor   Bill Aycock
      • [Amps] Parasitic suppressor resistor   R.Measures
      • [Amps] Parasitic suppressor resistor   Bill Turner
• [Amps] WTB: Peter Dahl Henry 2K Classic-x Plate Xfmr?   Rich Hallman - N7TR
• [Amps] Motorola Nucleus Amplifier Help needed   Michael J. Clarson
• [Amps] furnace   Rob Atkinson, K5UJ
• [Amps] 3-500 Old vs New Style   w6ah at comcast.net
• [Amps] power tertrode   pa3duv at planet.nl
• [Amps] How about this furnace?   Peter Chadwick
  • [Amps] How about this furnace?   R.Measures
  • [Amps] How about this furnace?   Peter Voelpel
• [Amps] How about this furnace?   pa3duv at planet.nl
  • [Amps] How about this furnace?   R.Measures
• [Amps] How about this furnace?   Stan Stockton
  • [Amps] How about this furnace?   Peter Voelpel
    • [Amps] How about this furnace?   R.Measures
  • [Amps] How about this furnace?   Jason Buchanan
    • [Amps] How about this furnace?   R.Measures
  • [Amps] How about this furnace?   R.Measures
    • [Amps] How about this furnace?   Tony King - W4ZT
  • [Amps] RE : How about this furnace?   hermans
• [Amps] How about this furnace?   Peter Chadwick
  • [Amps] How about this furnace?   Osten B Magnusson
    • [Amps] How about this furnace?   Bill Turner
      • [Amps] How about this furnace?   Tony King - W4ZT
      • [Amps] How about this furnace?   Karl-Arne Markström
      • [Amps] ANOTHER FURNACE!   k0dan
      • [Amps] ANOTHER FURNACE!   Osten B Magnusson
      • [Amps] ANOTHER FURNACE!   Bob Nielsen
      • [Amps] ANOTHER FURNACE!   Osten B Magnusson
      • [Amps] ANOTHER FURNACE!   Bill Turner
      • [Amps] ANOTHER FURNACE!   Jan Erik Holm
      • [Amps] ANOTHER FURNACE!   k0dan
      • [Amps] How about this furnace?   Jan Erik Holm
  • [Amps] Corona   PA3DUV
    • [Amps] Corona   Karl-Arne Markström
• [Amps] Parasitic suppressor resistor   Peter Chadwick
• [Amps] How about this furnace?   pa3duv at planet.nl
• [Amps] WANTED: 7.5VCT @ 42amps filament xmfr   w2cqm at juno.com
• [Amps] Anyone using the OM2500 HF Amp?   Rich Hallman - N7TR
  • [Amps] 2KW $1000 amp kit   Jason Buchanan
    • [Amps] 2KW $1000 amp kit   Peter Voelpel
• [Amps] Low-VHF-Q Parasitic Suppressor Retrofit Kits   R.Measures
• [Amps] 240VAC Neon Indicator/Lamp   Dugas, Jason A. (JSC-EP)
• [Amps] Anyone using the OM2500 HF Amp?   Bill Turner
• [Amps] Anyone using the OM2500 HF Amp?   Georgens, Tom
  • [Amps] Anyone using the OM2500 HF Amp?   F5HRY
• [Amps] 240VAC Neon Indicator/Lamp   HAROLD B MANDEL
  • [Amps] 240VAC Neon Indicator/Lamp   R.Measures
• [Amps] 10,000 Amp   Richard Carey
  • [Amps] 10,000 Amp   Phil Clements
• [Amps] Another use for Neon Lamps   w6ah at comcast.net
  • [Amps] RE : Another use for Neon Lamps   hermans
• [Amps] 240 v Neon   Rich
• [Amps] Another use for Neon Lamps   w6ah at comcast.net
  • [Amps] Another use for Neon Lamps   kenw2dtc
    • [Amps] Another use for Neon Lamps   Bill Turner
      • [Amps] Another use for Neon Lamps   Will Matney
      • [Amps] Another use for Neon Lamps   Jason Buchanan
      • [Amps] Another use for Neon Lamps   k7fm
      • [Amps] Another use for Neon Lamps   Bill Turner
• [Amps] Anyone using the OM2500 HF Amp?   w6ah at comcast.net
• [Amps] 2KW $1000 amp kit   Jim Kearman
• [Amps] SHV Connectors & Coax   Dugas, Jason A. (JSC-EP)
  • [Amps] SHV Connectors & Coax   Dr. David Kirkby
    • [Amps] SHV Connectors & Coax   Bill Turner
      • [Amps] SHV Connectors & Coax   Dr. David Kirkby
    • [Amps] SHV Connectors & Coax   Peter Voelpel
      • [Amps] SHV Connectors & Coax   Dr. David Kirkby
• [Amps] RE : Another use for Neon Lamps   w6ah at comcast.net
• [Amps] Henry 4k Ultra value?   Eric Dobrowansky
• [Amps] High Voltage connectors (SHV)   N7KA at comcast.net
• [Amps] Furnace Replys   Ron Spencer
• [Amps] How about this furnace?   R.Measures
  • [Amps] How about this furnace?   Phil Clements
    • [Amps] How about this furnace?   Tony King - W4ZT
      • [Amps] How about this furnace?   crawfish
    • [Amps] How about this furnace?   R.Measures
  • [Amps] Source for rebuilding 8877 triodes   Mike Schatzberg
• [Amps] Neon   Rich
• [Amps] Low-VHF-Q Parasitic Suppressor Retrofit Kits   Peter Chadwick
  • [Amps] Low-VHF-Q Parasitic Suppressor Retrofit Kits   R.Measures
• [Amps] How about this furnace?   Peter Chadwick
  • [Amps] How about this furnace?   R.Measures
    • [Amps] How about this furnace?   N7HIY
• [Amps] How about this furnace?   Peter Chadwick
  • [Amps] How about this furnace?   Jason Buchanan
    • [Amps] How about this furnace?   bob finger
      • [Amps] How about this furnace?   R.Measures
      • [Amps] Was: about this furnace? Now: Power costs   Keith Dutson
• [Amps] How about this furnace?   Peter Chadwick
  • [Amps] How about this furnace?   R.Measures
• [Amps] neon indicators   Peter Chadwick
• [Amps] 2kw 1000bucks amp kit   jenkins at bellsouth.net
• [Amps] SELL: 90% Eimac 8877   w2cqm at juno.com
• [Amps] SELL: OEM Henry Amp Components   w2cqm at juno.com
• [Amps] How about this furnace?   PlanerGuy at aol.com
• [Amps] Tuned input for 2 x GS 31 B   Geert Hofman
  • [Amps] Tuned input for 2 x GS 31 B   Phil Clements
    • [Amps] Tuned input for 2 x GS 31 B   Peter Voelpel
  • [Amps] Tuned input for 2 x GS 31 B   Peter Voelpel
• [Amps] Unsubscribe - please   Busiek, Allen W Mr IACH
• [Amps] FW: How about this furnace?   Larry N. Carman
• [Amps] my little amp project of many hours..maybe 50% done   Partain, Chuck
  • [Amps] my little amp project of many hours..maybe 50% done   Keith Dutson
  • [Amps] my little amp project of many hours..maybe 50% done   Larry N. Carman
• [Amps] my little amp project of many hours..maybe 50% done   Partain, Chuck
  • [Amps] my little amp project of many hours..maybe 50% done   Peter Voelpel
• [Amps] Tuned input for 2 x GS 31 B   TexasRF at aol.com
• [Amps] Supplier of RG-59   Dugas, Jason A. (JSC-EP)
• [Amps] Measuring Q with an SWR analyzer   Bill Turner
  • [Amps] Measuring Q with an SWR analyzer   Karl-Arne Markström
    • [Amps] Measuring Q with an SWR analyzer   Bill Turner
• [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   KD7QAE
  • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   Bill Turner
    • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   KD7QAE
  • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   R.Measures
• [Amps] Henry 4K Ultra   Bob Maser
• Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   Peter Chadwick
  • Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   R.Measures
• [Amps] Measuring Q with an SWR analyzer   Peter Chadwick
  • [Amps] Measuring Q with an SWR analyzer   Bill Turner
• Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   pa3duv at planet.nl
• Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   Peter Chadwick
• Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   Peter Chadwick
  • Re: [Amps] Is solid Cu 600VAC house wire, good for tank  toroids?   R.Measures
  • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   rob
    • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   Alex Eban
      • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   Osten B Magnusson
      • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   Vic K2VCO
    • [Amps] Is solid Cu 600VAC house wire, good for tank toroids?   Gary Smith
• [Amps] NEC-think.   R.Measures
• [Amps] Measuring Q with an SWR analyzer   Bill Turner
• [Amps] my little amp project of many hours..maybe 50% done   Partain, Chuck
• [Amps] NEC-think.   Gudguyham at aol.com
  • [Amps] NEC-think.   Gary Smith
  • [Amps] NEC-think.   R.Measures
    • [Amps] NEC-think.   John Popelish
      • [Amps] NEC-think.   R.Measures
      • [Amps] NEC-think.   m.ford
      • [Amps] NEC-think.   R.Measures
      • [Amps] NEC-think.   W2RU - Bud Hippisley
      • [Amps] NEC-think.   m.ford
      • [Amps] NEC-think.   John Popelish
      • [Amps] NEC-think.   Jim Brown
      • [Amps] NEC-think.   John Popelish
      • [Amps] NEC-think.   R.Measures
      • [Amps] NEC-think.   John Popelish
      • [Amps] NEC-think.   R.Measures
      • [Amps] NEC-think.   John Popelish
• [Amps] Need G-10 board material   john.brewer at us.schneider-electric.com
  • [Amps] Need G-10 board material   John Popelish
• [Amps] For Sale-Pair of GU74Bs and SK1A sockets   K4SO
• [Amps] 2 KV Power Supply Parts FS   Byron Tatum
• [Amps] 2 KV Power Supply Parts FS   Steve Katz
• [Amps] lk550 plate efficency   Dxhogg at aol.com
  • [Amps] lk550 plate efficency   Phil Clements
  • [Amps] lk550 plate efficency   W2RU - Bud Hippisley
• [Amps] NEC-think.   Gudguyham at aol.com
  • [Amps] NEC-think.   R.Measures
    • [Amps] NEC-think.   Alex Eban
      • [Amps] NEC-think.   R.Measures
    • [Amps] NEC-think.   John Popelish
• [Amps] NEC-think.   Joe
  • [Amps] NEC-think.   PA3DUV
• [Amps] my little amp project of many hours..maybe 50% done   Partain, Chuck
  • [Amps] my little amp project of many hours..maybe 50% done   PA3DUV
    • [Amps] my little amp project of many hours..maybe 50% done   Jan Erik Holm
    • [Amps] my little amp project of many hours..maybe 50% done   Peter Voelpel
• [Amps] my little amp project of many hours..maybe 50% done   HAROLD B MANDEL
  • [Amps] my little amp project of many hours..maybe 50% done   Bill Turner
• [Amps] 4-400 output problem   Steve Bookout
  • [Amps] 4-400 output problem   Steve Thompson
• [Amps] GU95B and GU93B, no takers?   PA3DUV
  • [Amps] GU95B and GU93B, no takers?   Peter Voelpel
• [Amps] 4-400 output problem   TexasRF at aol.com
• [Amps] Plate choke and bypassing   Jim Kearman
  • [Amps] Plate choke and bypassing   John Popelish
    • [Amps] Plate choke and bypassing   Bill Turner
      • [Amps] Plate choke and bypassing   John Popelish
      • [Amps] Plate choke and bypassing   Bill Turner
      • [Amps] Plate choke and bypassing   KD7QAE
• [Amps] IEEE 488/ GPIB module wanted for TDS-220 scope   Conrad_G0RUZ
• [Amps] NEC-think.   John
  • [Amps] NEC-think.   R.Measures
• [Amps] Tapping a plate tank coil   Bill Turner
  • [Amps] Tapping a plate tank coil   John Popelish
    • [Amps] Tapping a plate tank coil   Bill Turner
• [Amps] AM6154's Amps FS   Byron Tatum
• [Amps] pictures Emtron DX3 internals   PA3DUV
• [Amps] Plate choke and bypassing   Peter Chadwick
• [Amps] NEC-think.   Peter Chadwick
  • [Amps] NEC-think.   Bill Turner
• [Amps] Kenyon T180?   StephenTetorka at cs.com
• [Amps] Westinghouse BC Ammeter QX-37   HAROLD B MANDEL
  • [Amps] Westinghouse BC Ammeter QX-37   RICHARD GEORGE
  • [Amps] Westinghouse BC Ammeter QX-37   John
  • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
    • [Amps] Westinghouse BC Ammeter QX-37   Steve Thompson
      • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
      • [Amps] Westinghouse BC Ammeter QX-37   k7fm
      • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
      • [Amps] Westinghouse BC Ammeter QX-37   k7rdx
      • [Amps] Westinghouse BC Ammeter QX-37   Steve Thompson
      • [Amps] Westinghouse BC Ammeter QX-37   GM3SEK
      • [Amps] Westinghouse BC Ammeter QX-37   Tom Cathey
      • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
      • [Amps] Westinghouse BC Ammeter QX-37   Tom Cathey
      • [Amps] Westinghouse BC Ammeter QX-37   Karl-Arne Markström
      • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
      • [Amps] Westinghouse BC Ammeter QX-37   Steve Thompson
• [Amps] Westinghouse BC Ammeter QX-37   Jim Kearman
• [Amps] Westinghouse BC Ammeter QX-37   HAROLD B MANDEL
  • [Amps] Westinghouse BC Ammeter QX-37   Ian White, GM3SEK
• [Amps] Westinghouse BC Ammeter QX-37   HAROLD B MANDEL
• [Amps] choke ferrite rod   john.brewer at us.schneider-electric.com
  • [Amps] choke ferrite rod   John Popelish
  • [Amps] choke ferrite rod   John Popelish
• [Amps] Amp for tax letter   dan r goddard
• [Amps] Clean -vs- Unclean   HAROLD B MANDEL
  • [Amps] Clean -vs- Unclean   Gary Schafer
  • [Amps] Clean -vs- Unclean   Steve Thompson
    • [Amps] Clean -vs- Unclean   R.Measures
• [Amps] Clean -vs- Unclean   Gudguyham at aol.com
  • [Amps] Clean -vs- Unclean   R.Measures
• [Amps] Effects of load Z mismatch?   Jim Kearman
  • [Amps] Effects of load Z mismatch?   Dr. David Kirkby
    • [Amps] Effects of load Z mismatch?   Gary Schafer
• [Amps] Clean -vs- Unclean   Carcia, Francis A HS
• [Amps] Westinghouse BC Ammeter QX-37   Colin Lamb
  • [Amps] Westinghouse BC Ammeter QX-37   Bill Turner
• [Amps] Clean -vs- Unclean   w6ah at comcast.net
  • [Amps] Clean -vs- Unclean   Tom Cathey
    • [Amps] Clean -vs- Unclean   Tom Cathey
      • [Amps] Clean -vs- Unclean   Gary Schafer
      • [Amps] Clean -vs- Unclean   W0UN -- John Brosnahan
      • [Amps] Clean -vs- Unclean   Steve Thompson
      • [Amps] Clean -vs- Unclean   Vic K2VCO
      • [Amps] Clean -vs- Unclean   Phil Clements
      • [Amps] Clean -vs- Unclean   Keith Dutson
      • [Amps] Clean -vs- Unclean   R.Measures
      • [Amps] Clean -vs- Unclean   Bill Turner
    • [Amps] Clean -vs- Unclean   R.Measures
• [Amps] Westinghouse BC Ammeter QX-37   Colin Lamb
• [Amps] FS: Placeholder, 15KW   HAROLD B MANDEL
  • [Amps] FS: Placeholder, 15KW   R.Measures
• [Amps] Clean -vs- Unclean   Tom Cathey
  • [Amps] Clean -vs- Unclean   peter.voelpel
    • [Amps] Clean -vs- Unclean   R.Measures
      • [Amps] OT- RF Processors   Shawn Tayler
  • [Amps] Clean -vs- Unclean   Bill Turner
    • [Amps] Clean -vs- Unclean   Dan Hearn
      • [Amps] Clean -vs- Unclean   Bill Turner
  • [Amps] Clean -vs- Unclean   k0dan
  • [Amps] Clean -vs- Unclean   Ivan Makarov
• [Amps] Effects of load Z mismatch?   Jim Kearman
• [Amps] Effects of load Z mismatch?   Jim Kearman
  • [Amps] Effects of load Z mismatch?   R.Measures
    • [Amps] Effects of load Z mismatch?   Larry N. Carman
• [Amps] Measuring tank Q   Bill Turner
  • [Amps] Measuring tank Q   John Popelish
    • [Amps] Measuring tank Q   Bill Turner
• [Amps] Components Causing Distortion in Amplifiers   k7fm
  • [Amps] Components Causing Distortion in Amplifiers   Tom Cathey
  • [Amps] Components Causing Distortion in Amplifiers   Karl-Arne Markström
    • [Amps] Components Causing Distortion in Amplifiers   Jan Erik Holm
  • [Amps] Components Causing Distortion in Amplifiers   jeff millar
• [Amps] IC-4KL questions and problem   Gil Bishop
• [Amps] 200 Watters   StephenTetorka at cs.com
• [Amps] Matching 8874's   Martin Sole
• [Amps] Meter Res.   Ron Spencer
  • [Amps] Meter Res.   Dr. David Kirkby
    • [Amps] Meter Res.   peter.voelpel
  • [Amps] Meter Res.   John Popelish
• [Amps] Meter Res.   Bill Turner
• [Amps] Meter Res.   John Popelish
• [Amps] new mobile amps from THP   PA3DUV
  • [Amps] new mobile amps from THP   Bill Turner
    • [Amps] new mobile amps from THP   Jim Brown
      • [Amps] new mobile amps from THP   Michael Tope
  • [Amps] new mobile amps from THP   Jim Brown
    • [Amps] new mobile amps from THP   Vic K2VCO
• [Amps] new mobile amps from THP   pa3duv at planet.nl
  • [Amps] new mobile amps from THP   peter.voelpel
• [Amps] FS: Parts that may be of some use in & around amplifiers...   wc6w at juno.com
• [Amps] silicone remover?   gdaught6 at stanford.edu
  • [Amps] silicone remover?   John
• [Amps] High Power Mobile   Joe Musto
• [Amps] Amps Digest, Vol 37, Issue 42   Joe Musto
• [Amps] AL811HX + Kenwood TS940   ec1cwg at dxhunters.com
• [Amps] GS-35B Vertical Mounting & Input Impedance   Mike
  • [Amps] GS-35B Vertical Mounting & Input Impedance   Steve Thompson
    • [Amps] GS-35B Vertical Mounting & Input Impedance   GM3SEK
      • [Amps] GS-35B Vertical Mounting & Input Impedance   Tony King - W4ZT
      • [Amps] GS-35B Vertical Mounting & Input Impedance   Mike
      • [Amps] GS-35B Vertical Mounting & Input Impedance   peter.voelpel
      • [Amps] GS-35B Vertical Mounting & Input Impedance   k7rdx
  • [Amps] GS-35B Vertical Mounting & Input Impedance   RCM
• [Amps] AL-80A - fighting with the relay again   Bill Coleman
  • [Amps] AL-80A - fighting with the relay again   Will Matney
• [Amps] AL-80A Relay troubles   Joe Musto
  • [Amps] AL-80A Relay troubles   Bill Coleman
    • [Amps] AL-80A Relay troubles   Robert Chudek
• [Amps] Tuned input on LK 500ZA   jdube
• [Amps] Amp Supply LK-450   longrange2 at ihtw.com
• [Amps] silicone solvent question   gdaught6 at stanford.edu
• [Amps] need a switch   KD7QAE
• [Amps] Original Ameritron AL-80 question   Butch
  • [Amps] Original Ameritron AL-80 question   John
    • [Amps] Original Ameritron AL-80 question   R.Measures
      • [Amps] Original Ameritron AL-80 question   GM3SEK
  • [Amps] Original Ameritron AL-80 question   Lawrence Anderson
  • [Amps] Original Ameritron AL-80 question....THANKS TO ALL!   Butch K4NAU
• [Amps] Original Ameritron AL-80 question   ValErwin at aol.com
• [Amps] Amps Digest, Vol 37, Issue 46   Joe Musto
  • [Amps] Amps Digest, Vol 37, Issue 46   Phil Clements
    • [Amps] Amps Digest, Vol 37, Issue 46   Bill Turner
• [Amps] SB-220/221   Dino Darling
• [Amps] Drake amp.   NOEL POULIN
  • [Amps] Source for 4-1000A Clips to hold chimney/tube?   Tom Cathey
  • [Amps] Drake amp.   Gary Smith
• [Amps] 3CX800 Tube Skirts I seen on ebay ? anyone use them yet ?   Tim
• [Amps] Burnishing relay contacts   Bruce Lanning
  • [Amps] Burnishing relay contacts   Bill Turner
• [Amps] Original Ameritron AL-80 Question........PART TWO   Butch K4NAU
• [Amps] Original Ameritron AL-80 Question........PART TWO   TexasRF at aol.com
• [Amps] SELL: Henry Tuned Input Plug in Modules   w2cqm at juno.com
• [Amps] Eimac UHF Cavity FS   Byron Tatum
• [Amps] Capacitor wanted   Bill Turner
  • [Amps] Capacitor wanted   Gary Schafer
    • [Amps] Capacitor wanted   peter.voelpel
      • [Amps] Capacitor wanted   Bill Turner
  • [Amps] Capacitor wanted   Bill Turner
    • [Amps] Capacitor wanted   peter.voelpel
      • [Amps] Capacitor wanted   Bill Turner
      • [Amps] Capacitor wanted   Bill Turner
      • [Amps] RF AMMETER   k0dan
    • [Amps] RE : Capacitor wanted   hermans
• [Amps] Wanted later model Henry Amplifier   w2cqm at juno.com
• [Amps] A question about 4CX250s and 4CX350s   w6ah at comcast.net
• [Amps] Burn-in for Eimac?   Bill Turner
  • [Amps] Burn-in for Eimac?   Steve Thompson
    • [Amps] Burn-in for Eimac?   GM3SEK
    • [Amps] Burn-in for Eimac?   R.Measures
      • [Amps] Burn-in for Eimac?   Bill Turner
• [Amps] SELL: Henry Complete Tank Circuit Component Package   w2cqm at juno.com
• [Amps] Burn-in for Eimac?   Jim Kearman
• [Amps] Link vs Pi   StephenTetorka at cs.com
• [Amps] Burn-in for Eimac?   Peter Chadwick
  • [Amps] Burn-in for Eimac?   R.Measures
    • [Amps] Burn-in for Eimac?   Gary Smith
    • [Amps] Burn-in for Eimac?   Tony King - W4ZT
  • [Amps] Burn-in for Eimac?   Pete Smith
• [Amps] 30S-1 Collins on 160m   rfdude at comcast.net
• [Amps] Burn-in for Eimac?   Colin Lamb
  • [Amps] Burn-in for Eimac?   gdaught6 at stanford.edu
    • [Amps] Burn-in for Eimac?   Bill Turner
    • [Amps] Burn-in for Eimac?   R.Measures
      • [Amps] Burn-in for Eimac?   GM3SEK
      • [Amps] Burn-in for Eimac?   R.Measures
      • [Amps] Burn-in for Eimac?   Karl-Arne Markström
      • [Amps] Burn-in for Eimac?   R.Measures
      • [Amps] Burn-in for Eimac?   Ian White, GM3SEK
      • [Amps] Burn-in for Eimac?   Karl-Arne Markström
      • [Amps] Burn-in for Eimac?   Ian White, GM3SEK
      • [Amps] Burn-in for Eimac?   R.Measures
  • [Amps] Burn-in for Eimac?   Robert Chudek
• [Amps] Henry 2KD-2 Documentation wanted   KT0DX (Steve)
• [Amps] Tube Question   Byron Tatum
• [Amps] Eimac 3CX400U7's FS   Byron Tatum
• [Amps] LK-500   Bengt A Jockert
  • [Amps] LK-500   John Popelish
  • [Amps] LK-500   jsb at digistar.com
• [Amps] LK-500   dick.knol at planet.nl
  • [Amps] LK-500   Steve Thompson
    • [Amps] LK-500   R.Measures
      • [Amps] LK-500   Steve Thompson
• [Amps] 100 hour "run in" time for tubes tspa   John T. M. Lyles
• [Amps] Attention - amplifier builders   Bob Sullivan
• [Amps] 3dB Hybrid coupler   Werner Hasemann
  • [Amps] 3dB Hybrid coupler   GM3SEK
    • [Amps] 3dB Hybrid coupler   Conrad_G0RUZ
• [Amps] Input Network?   Mike
  • [Amps] Input Network?   Vic K2VCO
  • [Amps] Input Network?   Tony King - W4ZT
• [Amps] DXpedition Amp Recommendation   Keith Dutson
  • [Amps] DXpedition Amp Recommendation   Guido
  • [Amps] DXpedition Amp Recommendation   N7HIY
    • [Amps] DXpedition Amp Recommendation   Keith Dutson
• [Amps] DXpedition Amp Recommendation   HAROLD B MANDEL
  • [Amps] DXpedition Amp Recommendation   Keith Dutson
    • [Amps] DXpedition Amp Recommendation   Steve Thompson
    • [Amps] DXpedition Amp Recommendation   PA3DUV
      • [Amps] DXpedition Amp Recommendation   PA3DUV
      • [Amps] DXpedition Amp Recommendation   Jim Brown
      • [Amps] DXpedition Amp Recommendation   Phil Clements
• [Amps] input circuit design problem TSPA   John T. M. Lyles
• [Amps] 4-400A Input impedance   Bob Maser
  • [Amps] 4-400A Input impedance   k7fm
• [Amps] DXpedition Amp Recommendation   Dino Darling
• [Amps] Amps on DXpedition to Malta (9H).   Bob Maser
• [Amps] Fwd: Re: 4-400A Input impedance   Bill Fuqua
• [Amps] SB-1000 replacement fan   Jaap PA5J
• [Amps] MLA-2500 Power Supply Capacity   k6zz at mail.ccis.com
  • [Amps] MLA-2500 Power Supply Capacity   Tony King - W4ZT
    • [Amps] MLA-2500 Power Supply Capacity   Gary Smith
  • [Amps] MLA-2500 Power Supply Capacity   Gary Smith
  • [Amps] MLA-2500 Power Supply Capacity   Winfried Kriegl
• [Amps] VHF transistors were to buy   RICHARD GEORGE
• [Amps] Alpha 6 amplifier   Conrad_G0RUZ
• [Amps] DXpedition amps   Dave Haupt
  • [Amps] Ten Tec Herc 444 (original Herc)   Jim Brown
    • [Amps] Ten Tec Herc 444 (original Herc)   John Popelish
      • [Amps] Ten Tec Herc 444 (original Herc)   Steve Thompson
• [Amps] Tuned Input   Tony King - W4ZT
  • [Amps] Tuned Input   Bill Turner
  • [Amps] Tuned Input   Hector Garcia XE2K
  • [Amps] Tuned Input   Roger D Johnson
    • [Amps] Tuned Input   Ian White, GM3SEK
      • [Amps] Tuned Input   Tony King - W4ZT
      • [Amps] RE : Tuned Input   hermans
      • [Amps] Tuned Input   George badger
      • [Amps] Tuned Input   Steve Thompson
      • [Amps] Tuned Input   R.Measures
      • [Amps] Tuned Input   Gary Schafer
      • [Amps] Tuned Input   Karl-Arne Markström
      • [Amps] Tuned Input   R.Measures
      • [Amps] Tuned Input   Gary Schafer
    • [Amps] Tuned Input   Bill Fuqua
• [Amps] Silly (use of) variac question   Scott Townley
  • [Amps] Silly (use of) variac question   Vic K2VCO
    • [Amps] Silly (use of) variac question   Vic K2VCO
    • [Amps] Silly (use of) variac question   Bill Aycock
  • [Amps] Silly (use of) variac question   Robert Chudek
• [Amps] The Ultimate Boatanchor   Bob Maser
  • [Amps] The Ultimate Boatanchor   Gary Smith
• [Amps] MLA-2500 Power Supply Capacity   Bob Selbrede, K6ZZ
• [Amps] Tuned Input   Bob Selbrede, K6ZZ
• [Amps] GU78B and socket for sale   Conrad_G0RUZ
• [Amps] Tuned Input   Peter Chadwick
• [Amps] Tuned Input   Scott Townley
• [Amps] Ten Tec HERC II model 420 ---- TSPA   John T. M. Lyles
  • [Amps] Ten Tec HERC II model 420 ---- TSPA   Jim Brown
• [Amps] Need an 8877   Bill Turner
• [Amps] 8875 tubes   Tom Hix
• [Amps] Tube differences?   Bill Turner
• [Amps] 813 Amplifiers & Key Clicks...   Ed Swynar
• [Amps] 8874 Tubes   RZaepfel at aol.com
• [Amps] Tuned Input   w6ah at comcast.net
  • [Amps] Tuned Input   Bill Turner
    • [Amps] ETO APLHA 91b fan/blower replacement   KR4DA
• [Amps] FL7000 for parts   Tim O'Rourke
• [Amps] Tuned Input   Bill L. Fuqua
• [Amps] Tuned Input   w6ah at comcast.net
• [Amps] Info needed   Dan Hearn
• [Amps] input ckts.   carl s.
  • [Amps] Tuned Input   Tony King - W4ZT
• [Amps] Building or Buying a Tuned Input Network   Bob Selbrede, K6ZZ
  • [Amps] Building or Buying a Tuned Input Network   Tony King - W4ZT
    • [Amps] Building or Buying a Tuned Input Network   Bill Turner
      • [Amps] Building or Buying a Tuned Input Network   Tony King - W4ZT
      • [Amps] Building or Buying a Tuned Input Network   Bill Turner
      • [Amps] Building or Buying a Tuned Input Network   Tony King - W4ZT
      • [Amps] Building or Buying a Tuned Input Network   Bill Turner
      • [Amps] Building or Buying a Tuned Input Network   Vic K2VCO
      • [Amps] Building or Buying a Tuned Input Network   Roger D Johnson
      • [Amps] Building or Buying a Tuned Input Network   Gary Schafer
      • [Amps] Building or Buying a Tuned Input Network   Vic K2VCO
      • [Amps] Building or Buying a Tuned Input Network   Gary Schafer
      • [Amps] Building or Buying a Tuned Input Network   Vic K2VCO
  • [Amps] Building or Buying a Tuned Input Network   Hector Garcia XE2K
  • [Amps] Building or Buying a Tuned Input Network   Ron Spencer
• [Amps] GS35B on 144 Mhz   Glenn McNeil
• [Amps] info needed (update)   Dan Hearn
• [Amps] Building or Buying a Tuned Input Network   Bob Selbrede, K6ZZ
  • [Amps] Building or Buying a Tuned Input Network   Paul Hewitt
• [Amps] Building or Buying a Tuned Input Network   w6ah at comcast.net
  • [Amps] Building or Buying a Tuned Input Network   Bill Turner
• [Amps] corded dial drive help   Scott Townley
• [Amps] Building or Buying a Tuned Input Network   w6ah at comcast.net
  • [Amps] Building or Buying a Tuned Input Network   Bill Turner
• [Amps] Building or Buying a Tuned Input Network   w6ah at comcast.net
  • [Amps] Building or Buying a Tuned Input Network   Tony King - W4ZT
• [Amps] Tuned Input   Peter Chadwick
  • [Amps] Tuned Input   Ian White, GM3SEK
• [Amps] Tuned Input   Peter Chadwick
• [Amps] More: corded dial drive help   Scott Townley
  • [Amps] More: corded dial drive help   Tony King - W4ZT
  • [Amps] More: corded dial drive help   Will Matney
• [Amps] Ten Tec Herc II (model 420) thermal rating TSPA   John T. M. Lyles
  • [Amps] Ten Tec Herc II (model 420) thermal rating TSPA   m.ford
• [Amps] GS35B on 144 Mhz   TexasRF at aol.com
• [Amps] Building or Buying a Tuned Input Network   Roger D Johnson
• [Amps] ETO APLHA 91b fan/blower replacement   KR4DA
• [Amps] More: corded dial drive help   Will Matney
• [Amps] SB-200 Amp with 811 tubes?   D Conklin
  • [Amps] SB-200 Amp with 811 tubes?   carl s.
  • [Amps] OT : The word rookie   Conrad_G0RUZ
    • [Amps] OT : The word rookie   kenw2dtc
      • [Amps] OT : The word rookie   Butch K4NAU
      • [Amps] OT : The word rookie   John Popelish
  • [Amps] SB-200 Amp with 811 tubes?   k7fm
  • [Amps] SB-200 Amp with 811 tubes?   Joe Subich, W4TV
• [Amps] SB-200 Amp with 811 tubes?   Steve Katz
• [Amps] For Sale Henry 2K Classic X   Gene Bigham
• [Amps] Telephone Interference Suppressors   Bob Maser
  • [Amps] Telephone Interference Suppressors   Will Matney
    • [Amps] Telephone Interference Suppressors   R.Measures
  • [Amps] Telephone Interference Suppressors   Mike D.
  • [Amps] Telephone Interference Suppressors   Bob Nielsen
    • [Amps] Telephone Interference Suppressors   Bob Nielsen
      • [Amps] Telephone Interference Suppressors   Dave, K2DP
  • [Amps] Telephone Interference Suppressors   Paul Christensen
• [Amps] OT : The word rookie   TexasRF at aol.com
  • [Amps] OT : The word rookie   R.Measures
• [Amps] 4-1000A Toobs...   Ed Swynar
• [Amps] EMTRON DX2V   emoss98133 at msn.com
  • [Amps] EMTRON DX2V   PA3DUV
• [Amps] Stark 9-66 tube tester   Rocky Clayton
• [Amps] Tuned input   sm0aom at telia.com
  • [Amps] Tuned input   Gary Schafer
• [Amps] SB-200 Amp with 811 tubes?   Gudguyham at aol.com
• [Amps] Building Or Buying A Tuned Input Network   Bob Kirkland
  • [Amps] Building Or Buying A Tuned Input Network   Bob Kirkland
    • [Amps] Building Or Buying A Tuned Input Network   GGLL
      • [Amps] Building Or Buying A Tuned Input Network   Bob Kirkland
    • [Amps] Building Or Buying A Tuned Input Network   Bob Kirkland
• [Amps] Tuned input   Karl-Arne Markström
• [Amps] FW: Tuned input   Phil Clements
  • [Amps] FW: Tuned input   Roger D Johnson
    • [Amps] FW: Tuned input   Phil Clements
• [Amps] spraying tank coils ?   kenw2dtc
  • [Amps] spraying tank coils ?   David C. Hallam
    • [Amps] spraying tank coils ?   kenw2dtc
• [Amps] spraying tank coils ?   John Wagner
  • [Amps] spraying tank coils ?   R.Measures
• [Amps] SELL: 3-500's Amp ComponentPackage   w2cqm at juno.com
• [Amps] Copper / Brass strap?   Jim Kearman
  • [Amps] Copper / Brass strap?   John Popelish
• [Amps] measuring rf colis   Partain, Chuck
  • [Amps] measuring rf colis   Will Matney
    • [Amps] measuring rf colis   Conrad_G0RUZ
      • [Amps] measuring rf colis   Will Matney
      • [Amps] measuring rf colis   m.ford
      • [Amps] measuring rf colis   Bill Turner
      • [Amps] measuring rf colis   Will Matney
• [Amps] measuring rf colis   Scott Townley
• [Amps] dayton   Partain, Chuck
• [Amps] dayton   Partain, Chuck
• [Amps] Vector impedance instead of inductance TSPA   John T. M. Lyles
• [Amps] Peak Devices TSPA   John T. M. Lyles
• [Amps] 3-500Z info posted elsewhere tspa   John T. M. Lyles
• [Amps] HF-2500DX Time is about to tell the story...[long]   Robert Chudek
  • [Amps] HF-2500DX Time is about to tell the story...[long]   gdaught6 at stanford.edu
  • [Amps] HF-2500DX Time is about to tell the story...[long]   Bill Turner
• [Amps] Pspice models for power grid tubes   Xmitters at aol.com
  • [Amps] Pspice models for power grid tubes   R.Measures
• [Amps] Fwd: [Moon-net] twt data   TexasRF at aol.com
• [Amps] Pspice models for power grid tubes   Xmitters at aol.com
  • [Amps] Pspice models for power grid tubes   Will Matney
    • [Amps] Pspice models for power grid tubes   Mark Hill
• [Amps] GE EF-5A VHF Amplifier   Xmitters at aol.com
  • [Amps] GE EF-5A VHF Amplifier   RICHARD GEORGE
• [Amps] GE EF-5A VHF Amplifier   TexasRF at aol.com
  • [Amps] GE EF-5A VHF Amplifier   Ian White GM3SEK
• [Amps] Tempo 2000 Transformers For Sale   K4SO
• [Amps] Free Anti-virus Program   John- W4DJ
• [Amps] Measure tank current?   StephenTetorka at cs.com
• [Amps] measuring current TSPA   John T. M. Lyles
• [Amps] What blower?   Mike Bondarev
  • [Amps] What blower?   Dr. David Kirkby
    • [Amps] What blower?   Bill Turner
  • [Amps] What blower?   Mike Bondarev
    • [Amps] What blower?   r391
    • [Amps] What blower?   Bill Turner
• [Amps] What blower?   Jim Kearman
  • [Amps] What blower?   Tony King - W4ZT
• [Amps] power supply for larger solid-state amps   Scott Townley
  • [Amps] power supply for larger solid-state amps   Phil Clements
  • [Amps] power supply for larger solid-state amps   John Popelish
  • [Amps] power supply for larger solid-state amps   Will Matney
• [Amps] power supply for larger solid-state amps   TexasRF at aol.com
• [Amps] What blower?   Bob Selbrede, K6ZZ
  • [Amps] What blower?   Bill Turner
    • [Amps] What blower?   Gary Smith
      • [Amps] What blower?   Mike Bondarev
      • [Amps] What blower?   N7HIY
      • [Amps] What blower?   Ian White GM3SEK
      • [Amps] What blower?   R.Measures
      • [Amps] What blower?   Dudley Hurry
      • [Amps] What blower?   R.Measures
      • [Amps] What blower?   peter.voelpel
      • [Amps] What blower?   gdaught6 at stanford.edu
      • [Amps] What blower?   m.ford
      • [Amps] What blower?   Gary Smith
      • [Amps] What blower?   Bill Turner
      • [Amps] What blower?   Will Matney
      • [Amps] What blower?   R.Measures
      • [Amps] What blower?   Gary Schafer
      • [Amps] What blower?   Steve Thompson
      • [Amps] What blower?   Gary Schafer
      • [Amps] What blower?   Joe Isabella
      • [Amps] What blower?   Will Matney
      • [Amps] What blower?   PA3DUV
• [Amps] 3-500 / 4-400 cooling (09/10/2005)   John E. Cleeve
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Bill Turner
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Firson Maryutenli at home
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Vic K2VCO
• [Amps] AC to DC   Rich
  • [Amps] AC to DC   Bill Turner
    • [Amps] AC to DC   John Popelish
      • [Amps] AC to DC   Will Matney
    • [Amps] AC to DC   Gary Schafer
      • [Amps] AC to DC   John Popelish
      • [Amps] AC to DC   Gary Schafer
• [Amps] 3-500 / 4-400 cooling (09/10/2005)   Bill Turner
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Tony King - W4ZT
    • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Bill Turner
• [Amps] What blower?   Will Matney
• [Amps] What blower?   Will Matney
• [Amps] Heathkit SB-220 Restoration   ah8dx Craig Maxey
• [Amps] fan experts   jenkins at bellsouth.net
  • [Amps] fan experts   Phil Clements
    • [Amps] fan experts   Bill Turner
      • [Amps] fan experts   Karl-Arne Markström
      • [Amps] fan experts   Karl-Arne Markström
    • [Amps] fan experts   W0UN -- John Brosnahan
    • [Amps] fan experts   R.Measures
      • [Amps] fan experts   Steve Thompson
    • [Amps] fan experts   Mike Bondarev
      • [Amps] fan experts   Karl-Arne Markström
      • [Amps] fan experts   peter.voelpel
      • [Amps] fan experts   R.Measures
      • [Amps] fan experts   peter.voelpel
      • [Amps] fan experts   R.Measures
      • [Amps] fan experts   peter.voelpel
• [Amps] Master Voltohmyst   Will Matney
  • [Amps] Master Voltohmyst   RICHARD GEORGE
    • [Amps] Master Voltohmyst   Will Matney
  • [Amps] Master Voltohmyst   Bill Turner
    • [Amps] Master Voltohmyst-Private off list   Will Matney
      • [Amps] Master Voltohmyst-Private off list   harry kauffman
    • [Amps] Master Voltohmyst   Bill Turner
• [Amps] dippers   carl s.
  • [Amps] dippers   k7fm
    • [Amps] dippers   Will Matney
• [Amps] dipper   carl s.
• [Amps] Speaking of ebay   Will Matney
• [Amps] transformers   carl s.
• [Amps] What blower?   Will Matney
• [Amps] Alpha 78 QSK Board   RZaepfel at aol.com
• [Amps] Henry 4K Ultra Tank Impedance   Bob Maser
• [Amps] AC to DC   John Popelish
• [Amps] GE 2 meter amp unit   Artmouton
• [Amps] What blower?   Ken KW0A
• [Amps] Master Voltohmyst   Will Matney
• [Amps] 8875's on E-Bay   Bob Selbrede, K6ZZ
• [Amps] Anyone Have A 13.5 VAC 4-6 Amp Filament Xfmr Available?   Bob Selbrede, K6ZZ
• [Amps] Anyone Have A 13.5 VAC 4-6 Amp Filament Xfmr Available?   TexasRF at aol.com
• [Amps] GU74s and SK1A sockets FOR SALE   Mark Killmon
• [Amps] Blowers   KR4DA
• [Amps] cathode to ground in tetrode amp   Partain, Chuck
• [Amps] RF choke for 160m amp mod   rfdude at comcast.net
• [Amps] cathode to ground in tetrode amp   Bill Turner
• [Amps] cathode to ground in tetrode amp   Partain, Chuck
  • [Amps] cathode to ground in tetrode amp   Gary Schafer
    • [Amps] cathode to ground in tetrode amp   R.Measures
      • [Amps] cathode to ground in tetrode amp   Will Matney
      • [Amps] [BULK]Re: cathode to ground in tetrode amp   John Popelish
      • [Amps] [BULK]Re: cathode to ground in tetrode amp   Will Matney
      • [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp   John Popelish
      • [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp   Will Matney
      • [Amps] [BULK]Re: [BULK]Re: cathode to ground in tetrode amp   Jim Tonne
      • [Amps] cathode to ground in tetrode amp   Will Matney
      • [Amps] [BULK]Re: cathode to ground in tetrode amp   R.Measures
      • [Amps] cathode to ground in tetrode amp   Steve Thompson
• [Amps] cathode to ground in tetrode amp   Bill Turner
• [Amps] cathode to ground in tetrode amp   TexasRF at aol.com
  • [Amps] cathode to ground in tetrode amp   Gary Schafer
    • [Amps] cathode to ground in tetrode amp   Steve Thompson
    • [Amps] cathode to ground in tetrode amp   Sam's Mail
      • [Amps] cathode to ground in tetrode amp   Gary Schafer
      • [Amps] cathode to ground in tetrode amp   gdaught6 at stanford.edu
      • [Amps] cathode to ground in tetrode amp   Gary Schafer
      • [Amps] cathode to ground in tetrode amp   Mike Bondarev
• [Amps] AC to DC   Rich
  • [Amps] AC to DC   Gary Schafer
  • [Amps] AC to DC   David C. Hallam
    • [Amps] AC to DC   Bill Turner
      • [Amps] AC to DC   Barrie Smith
      • [Amps] AC to DC   Will Matney
      • [Amps] AC to DC   R.Measures
• [Amps] FW: RF choke for 160m amp mod   rfdude at comcast.net
• [Amps] FW: RF choke for 160m amp mod   rfdude at comcast.net
• [Amps] amp   carl s.
  • [Amps] amp   R.Measures
• [Amps] Hi Potting a 4-1000   Kurt Lacko
  • [Amps] Hi Potting a 4-1000   R.Measures
    • [Amps] Hi Potting a 4-1000   Ian White GM3SEK
• [Amps] WANTED: Heathkit SB-220   ah8dx Craig Maxey
• [Amps] Hi Potting a 4-1000   wc6w at juno.com
• [Amps] wanted amp   kf4toh at aol.com
• [Amps] 3-500 / 4-400 cooling (09/10/2005)   Peter Chadwick
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Ian White GM3SEK
    • [Amps] 3-500 / 4-400 cooling (09/10/2005)   Steve Thompson
      • [Amps] 3-500 / 4-400 cooling (09/10/2005)   R.Measures
  • [Amps] 3-500 / 4-400 cooling (09/10/2005)   R.Measures
• [Amps] RF Power Labs V360 PA finals sub   Bruce Brackin
  • [Amps] RF Power Labs V360 PA finals sub   Will Matney
• [Amps] RF Power Labs V360 PA finals sub   wc6w at juno.com
• [Amps] GS-35b grid current?   Bill Turner
  • [Amps] GS-35b grid current?   Ian White GM3SEK
• [Amps] cathode to ground in tetrode amp   Mike Bondarev
• [Amps] IMD numbers for Russian tubes   Theo Bellamy
  • [Amps] IMD numbers for Russian tubes   Conrad_G0RUZ
    • [Amps] RE : IMD numbers for Russian tubes   hermans
• [Amps] IMD numbers for Russian tubes   Partain, Chuck
• [Amps] 3-500 / 4-400 cooling (09/10/2005)   Peter Chadwick
• [Amps] Hi-Potting a 4-1000   Kurt Lacko
• [Amps] What blower?   Mike
• [Amps] Sell amp parts   Dennis A. Homerick
• [Amps] 572B Current Balance   KA9S - 2
• [Amps] Cooling base of tetrodes - an odd example tspa   John T. M. Lyles
  • [Amps] Dummy Load   Stein Roar, LA6FJA/KI4KJP
• [Amps] AC-DC Relay Coils   Will Matney

Last message date: Tue Jan 31 22:32:49 EST 2006
Archived on: Tue Jan 31 22:33:27 EST 2006

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...