[Amps] Original Ameritron AL-80 Question........PART TWO
TexasRF@aol.com
TexasRF at aol.com
Sat Jan 14 17:16:20 EST 2006
Set your VOM to volts, connect it to the xmt keying jack on the AL80 and
measure the voltage to ground (chassis). Then switch the VOM to current and
measure that. Compare the numbers with the ratings in your FT920 manual and you
will have the answer.
73,
Gerald K5GW
In a message dated 1/14/2006 4:07:51 P.M. Central Standard Time,
k4nau at comcast.net writes:
Anyone out there know what the switching voltage and current are for the
AL-80 (NOT AL-80A or AL-80B)? I'm trying to interface the amp to my FT-920 &
there are a couple of options for doing so, depending on the voltage/current
.
Thanks,
Butch K4NAU
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.14.17/229 - Release Date: 1/13/2006
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list