[Amps] Burn-in for Eimac?

Karl-Arne Markström sm0aom at telia.com
Tue Jan 17 15:22:16 EST 2006


I now more throughly understand that "gettering" involves the very complicated discipline of
"surface physics" which appears to be some kind of "twilight zone" 
between chemistry and physics.

The word "dissolves" should maybe have been replaced with "attaches to".

73/

Karl-Arne
SM0AOM


----- Original Message ----- 
From: "Ian White, GM3SEK" <gm3sek at ifwtech.co.uk>
To: <amps at contesting.com>
Cc: <gdaught6 at stanford.edu>; "Karl-Arne Markström" <sm0aom at telia.com>
Sent: Tuesday, January 17, 2006 7:49 PM
Subject: Re: [Amps] Burn-in for Eimac?



Just arrived home to read Rich, Karl-Arne, then Rich again...

 > On Jan 17, 2006, at 3:25 AM, Karl-Arne Markström wrote:
 >
 >> If  I understand the physics correctly, the zirconium getter simply
 >> dissolves and binds the
 >> gas molecules in its own molecule structure.
 >>
 >> An interesting treatment of getters in general can be found in
 >> http://www.thevalvepage.com/valvetek/getter/getter.htm
 >>
 >> Zirconium getters have their own section at about mid-page.

Thanks, Karl-Arne, that's a very interesting reference.

 >>R. Measures wrote:
> Interesting indeed.  Thanks, Karl Arne.  So Nitrogen doesn't form a 
> compound with Zr, the Zr acts as a N2-sponge?
> 

It's hard to choose exactly the right words to describe what happens at 
the metal surface. At the microscopic scale, the surface is very rough 
and it might have internal pores like a sponge... but 'acts as a sponge' 
isn't really the right image.

'Dissolved' isn't really right either, because the gas-metal 
interactions take place almost exclusively with the atoms right on the 
surface of the metal.

At the atomic scale, the metal surface has many 'unsatisfied' chemical 
bonds, so gas atoms can attach to those. Oxygen tends to form strong 
bonds with metals, while  species like molecular nitrogen (N2) don't 
have much chemical affinity with metals; but they can still be held by 
weaker chemical forces.

Since the reaction doesn't involve all the metal atoms, it doesn't form 
any distinctive chemical compound.

> Haveyou  ever seen a Zr gettering wire wrapped around a a 
> thoriated-tungsten filament?  Have you ever observed that the leakage 
> current of a 3-500Z that has long been in storage decreases after the 
> filament has been lit for 100 or so hours?
> 
The 3-500Z has its getter on the anode, so heating just the filament 
isn't going to make much difference, is it?



73 from
Ian GM3SEK

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.19/231 - Release Date: 2006-01-16




-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.14.19/231 - Release Date: 2006-01-16



More information about the Amps mailing list