[Amps] ESI 253

[Will Matney]

If you want to read up on this meter, the link to the manufacturer is below;

http://www.tegam.com/html/lcr_meters.htm

ESI changed names to Tegam.

Best,

Will

*********** REPLY SEPARATOR  ***********

On 3/21/06 at 10:46 PM Will Matney wrote:

>All,
>
>The seller I bought from has another he just e-mailed me about, same price
>and listed it on ebay. Below is the link for any interested. You'll have
>to get the lead set for it as it uses the 4-wire method. The plug for the
>leads plugs on a PC board which comes out in front like that digital
>Heathkit one did. Really, you could solder the leads right on the PC board
>and it will work. You'd just need a couple of kelvin clips and two pieces
>of shielded cable. ESI just recently decided to drop this model from their
>line, but all parts are still available for it.
>
>ESI 253;
>
>http://cgi.ebay.com/ESI-253-AUTORANGING-IMPEDANCE-METER_W0QQitemZ7602814274QQcategoryZ25421QQrdZ1QQcmdZViewItem
>
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps