[Amps] 813's

[Gudguyham at aol.com]

In a message dated 5/27/2006 3:46:17 P.M. Eastern Standard Time,  
vic at rakefet.com writes:

k7fm  wrote:
> The RCA Transmitting Tubes Technical Manual TT-5 states the  following:
> 
> OPERATING CONSIDERATIONS
> 
> "The 813  ... may be operated in vertical position with base up or down, or 
> in  horizontal position with pins 2 and 6 in vertical plane."
>  



Sorry, I read my e-mails in the wrong sequence.  I should stop doing  that.  
Hi Hi
 
but the pin orientation "2 and 6" in the vertical plane is the key  issue!!