[Amps] More LK500

[Jim Kearman]

From: Jeff Strailey <liveccam at yahoo.com>
> My problem with operating an LK500 following the change to 120 Vac operation 
> appears to be related to a step start mod that was added at some time 

Jeff, It's time to learn the fine art of reverse engineering. Make sure the HV caps are discharged and the unit is unplugged. Then get out your ohmmeter and start tracing the wiring, so you can draw a schematic. That way you know what's in there, and aren't guessing based on what may be in there.

73,

Jim, KR1S
http://kr1s.kearman.com/