[Amps] Plate choke material..

[John E. Cleeve]

Hello Bob,
I suggest you try talking to your nearest scientific glass supply facility,
glass tube for laboratory set ups, is available in many diameters and wall
thickness. I am sure that they would cooperate and cut a length to suit your
needs.  Best of luck...John G3JVC.



-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of robert briggs
Sent: 19 July 2008 12:07
To: amps at contesting.com
Subject: [Amps] Plate choke material..



Hi all, I am scratching around to find some material to make another 
couple of plate chokes for one of my new amplifiers..

Price of 3/4 inch Teflon per foot here in Aus is outrageous....I have 
some Ultra High Density Polyethylene 3/4 rod here and wondering if this 
is suitable for the job?..The choke is in the vicinity of the tube 
exhaust and I certainly don't want to  end up with a banana or worse... 
The choke is to be mounted horizontally..

Regards all.....Bob VK3ZL..
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps