[Amps] SB220 "A" mods

[jeremy-ca]

Ive never replaced one or heard of a problem. The PS caps are already 
charged and wont discharge much in the time the switch is thrown.

Carl
KM1H

----- Original Message ----- 
From: "Steve Flood" <kk7uv at bresnan.net>
To: <amps at contesting.com>
Sent: Friday, March 28, 2008 12:35 PM
Subject: Re: [Amps] SB220 "A" mods


> I've often wondered about the "MODE" switch?   It selects the appropriate
> winding tap on the primary for higher voltage SSB or lower voltage CW.
> As you switch from one mode to the other, there is a temporary open 
> circuit
> on the primary as the switch cotactor swings from pole to pole.  Has this
> ever been a problem?
>
> Steve KK7UV
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>