[Amps] New Amps at Dayton

[Bob Maser]

The new Alpha amp that runs a pair of 4CX1000A's is the 8410.  This amp uses 
a 3.6KVA plate transformer.
Also at Dayton Emtron introduced their new DX2B which also uses the 
4CX1000A.  They are in the process of introducing the DX3B which will run a 
pair of the same tube.  Looks like all the manufacturers of amps are 
scrambling to replace the Russian tubes.  The 4CX1000A can be replaced by 
the 4CX1500B, which has higher plate dissipation(remember the 30S-1 mod with 
the high screen voltage?).

Bob W6TR
----- Original Message ----- 
From: "Dennis W0JX" <w0jx at yahoo.com>
To: "Amplifiers" <amps at contesting.com>
Sent: Tuesday, May 20, 2008 9:42 AM
Subject: Re: [Amps] New Amps at Dayton


> The only thing that I saw at Dayton worth noting is a change in the 
> current Alpha 8100.
>
>  The finals have been replaced with TWO 4CX1000A's instead of the 
> 4CX800A7's and the amp has been relabeled either an Alpha 8200 0r 8400 
> (sorry I tossed the literature and can't remember the exact number).
>
>  Anyway, this should be considered a warning to any amp owner who has an 
> Alpha 91, 99 or 8100, QRO 2500, or ACOM 1000 and 2000A. Alpha said the 
> supply of GU-74B's is drying up quickly and they made the switch to ensure 
> availability.
>
>  Incidentally, the 4CX1000A's used are NOT Eimac but made by Penta in 
> China.
>
>  73, Dennis W0JX/8
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps