[Amps] Russian Power Tubes

[DAVE WHITE]

A lot of people here in Europe have built amps with the GS35B and I hear reports of reliable operation with 4kv on the anode.  

As Richard alludes, we're experimenters and if things go *BANG* occasionally it's no big deal, especially with $100 Russian tubes.  I might find that the cost/benefit works out differently with a $1000 Eimac tube, though....

cheers

Dave G0OIL

--- On Wed, 16/12/09, RICHARD GEORGE <k6kwq at msn.com> wrote:

From: RICHARD GEORGE <k6kwq at msn.com>
Subject: Re: [Amps] Russian Power Tubes
To: dezrat1242 at yahoo.com, "amps fourm" <amps at contesting.com>
Date: Wednesday, 16 December, 2009, 1:49

Funny thing I worked as an engineer for 42 years.
This is ham radio not space shuttle engineereing.

K6KWQ Dick
 Amps by "MORE POWER"
  ----- Original Message ----- 
  From: Bill, W6WRT<mailto:dezrat1242 at yahoo.com> 
  To: amps fourm<mailto:amps at contesting.com> 
  Sent: Tuesday, December 15, 2009 5:04 PM
  Subject: Re: [Amps] Russian Power Tubes


  ORIGINAL MESSAGE:

  On Tue, 15 Dec 2009 13:03:33 -0800, "RICHARD GEORGE" <k6kwq at msn.com<mailto:k6kwq at msn.com>> wrote:

  >
  >The GS-35B will run for ever at 4KV with no problems.  I have built dozens of amps for VHF and UHF using this tube and running 4KV+ on the anode. 

  REPLY:

  If you ever apply for a job as a design engineer you might want to leave that
  off your resume.  :-)

  73, Bill W6WRT
  _______________________________________________
  Amps mailing list
  Amps at contesting.com<mailto:Amps at contesting.com>
  http://lists.contesting.com/mailman/listinfo/amps<http://lists.contesting.com/mailman/listinfo/amps>
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps