[Amps] SB-220 and Copious Amounts of Smoke...
Carl
km1h at jeremy.mv.com
Wed Feb 4 11:56:29 EST 2009
There are numerous postings on the Internet why that short occurs and
the procedure to eliminate the problem with a new transformer.
Carl
KM1H
----- Original Message -----
From: <Gudguyham at aol.com>
To: <amps at hidden-valley.com>; <amps at contesting.com>
Sent: Wednesday, February 04, 2009 7:31 AM
Subject: Re: [Amps] SB-220 and Copious Amounts of Smoke...
> With no load the filament transformer draws little current, with tubes
> in,
> it draws 30 amps. If there is a suspect short in the transformer it
> will be
> more prominent with the tubes in than without. Assuming the tubes are
> good
> and there is no filament to grid short, your filament transformer is
> now toast.
> Start looking for another one. Or have that one rewound. Good Luck
> **************Stay up to date on the latest news - from sports scores
> to
> stocks and so much more. (http://aol.com?ncid=emlcntaolcom00000022)
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
More information about the Amps
mailing list