[Amps] filament voltage dropping??

[Bob Maser]

It's all about watts.

Bob W6TR
----- Original Message ----- 
From: <mikflathead at aol.com>
To: <amps at contesting.com>
Sent: Sunday, January 11, 2009 11:13 PM
Subject: [Amps] filament voltage dropping??


> Are there any advantages to dropping on the primary side or the secondary 
> side ? This is on a K2RIW style amp for 432 mhz. The tubes are a pair of 
> 8930s. I need to go from 6.3 to 5.5 or so. Mike
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps