[Amps] filament voltage dropping??

[Carl]

Small 1-2A variacs are cheap on Ebay and take up little chassis space.

Carl
KM1H



----- Original Message ----- 
From: "Bob Maser" <bmaser at tampabay.rr.com>
To: <amps at contesting.com>; <mikflathead at aol.com>
Sent: Sunday, January 11, 2009 6:23 PM
Subject: Re: [Amps] filament voltage dropping??


> It's all about watts.
>
> Bob W6TR
> ----- Original Message ----- 
> From: <mikflathead at aol.com>
> To: <amps at contesting.com>
> Sent: Sunday, January 11, 2009 11:13 PM
> Subject: [Amps] filament voltage dropping??
>
>
>> Are there any advantages to dropping on the primary side or the 
>> secondary
>> side ? This is on a K2RIW style amp for 432 mhz. The tubes are a pair 
>> of
>> 8930s. I need to go from 6.3 to 5.5 or so. Mike
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>