[Amps] Source for good YC156 tubes and hv oil capacitors

Tim Duffy K3LR k3lr at k3lr.com
Tue Jan 27 16:01:58 EST 2009


Hi Rich:

I have used these capacitors at 4 KV with no problem. They say they are good
for 5 KV, but I have never needed that much voltage to run 1500 watts
output. 40 uF is plenty for a stable HV full wave rectified source.

73,
Tim K3LR
http://www.k3lr.com

-----Original Message-----
From: rich ferguson [mailto:n2xqm at cox.net] 
Sent: Tuesday, January 27, 2009 2:55 PM
To: k3lr at k3lr.com
Subject: Re: [Amps] Source for good YC156 tubes and hv oil capacitors

Tim,

Thanks for the inforamtion. Have you used their hv capacitors. I would like 
to run them at 5kV. The question is should 1 or 2 capacitors.

73's

Rich Ferguson
N2XQM
----- Original Message ----- 
From: "Tim Duffy K3LR" <k3lr at k3lr.com>
To: "'rich ferguson'" <n2xqm at cox.net>; <amps at contesting.com>
Sent: Tuesday, January 27, 2009 3:11 PM
Subject: RE: [Amps] Source for good YC156 tubes and hv oil capacitors


> Hi Rich:
>
> Here is a source for HV capacitors that I have used with great success.
>
> http://stores.ebay.com/QRO-Stuff-Store
>
>
> 73!
> Tim K3LR
> http://www.k3lr.com
>
> -----Original Message-----
> From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
> Behalf Of rich ferguson
> Sent: Tuesday, January 27, 2009 2:07 PM
> To: amps at contesting.com
> Subject: [Amps] Source for good YC156 tubes and hv oil capacitors
>
> I am looking for source for good yc156 tubes and high voltage oil filled
> capacitors for amplifier project
> thanks Rich N2XQM
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> 



More information about the Amps mailing list