[Amps] 813 screen

[Carl]

I dont believe that you will have a stability issue, even with plain 
bare sockets mounted at chassis height, in GG and on those bands.

My 4x 813 160-10M  grid driven Class C amp has them mounted so the top 
of the twist lock socket is at deck height. It also required a touch of 
neutralizing but is stable as a rock with 2800V.

Carl
KM1H



----- Original Message ----- 
From: "jonathan white" <jonathan.white20 at btinternet.com>
To: <amps at contesting.com>
Sent: Sunday, March 08, 2009 10:09 PM
Subject: [Amps] 813 screen


> Hi
> I hope you non`t think this trivial but.....
> Can anyone confirm one way or the other the placing of the internal
> screening plate at bottom of tube near base which is connected to a
> pin,and is grounded I believe
> If the 813 is like the QQVO6-40a tube which had a similar internal 
> plate
> this had to be placed at deck height or instability was a problem.
> I have decided to do something different and build a 3 band amp using
> 4x813 for 160,80,40..
> Yes I know these are old tubes but they just look dam classy if you 
> know
> what i mean!.
> Just getting ready for the flack!
>                            Jon G8CCL
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps