[Amps] Henry 2KD-5 10 Meter mod

[Steve Katz]

2KD-5 requires unblocking the 5th bandswitch position, adding the 10m coil and capacitors, and also changing the plate tank coil that is used for 10m.  The Henry "kit" came with all these parts, and I installed them in mine at the time (c. 1982).  Do you have the ribbon wound plate tank coil?

WB2WIK/6

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com]On
Behalf Of Roland AH6RR
Sent: Thursday, November 12, 2009 3:50 PM
To: amps at contesting.com
Subject: [Amps] Henry 2KD-5 10 Meter mod


Hello All,
I have just bought a Henry 2KD-5 that does not have the 10 meter mod done to it. It does have the 10M input coil bit in the instructions I downloaded it states to change L2 to the one supplied in the kit. Well since I do not have the new coil can any one tell me what the specs are? Dia and how many turns? would like to get this going on 10 also. The L2 on mine is for 24MHZ according to the parts list. Can I just take 3-4 turns out of mine. Thanks
Roland AH6RR
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps