[Amps] Look for a source of 240 VAC meter

[K1SG at aol.com]

Hi Lee,
 
In designing my 6M amp, I also went looking for a 240 VAC meter, and came  
up empty.
My solution was to build an expanded scale meter (200-250 VAC) around a  
240>24 volt transformer, a pair of 9.1 v Zener diodes and a 0-1 mA meter. By  
using a couple of pots in the circuit, I can adjust everything so that it's 
very  accurate, and a whole lot easier to read than a 0-240V scale.
I used Jim Tonne's quite wonderful program Meter to get the meter scale  
right.
If you'd like, I can shoot you a copy of the schematic for my expanded  
meter.
 
Steve 
 
Steve  Gilbert
K1SG
K1SG at AOL.com
508-435-9133
FN42fe  

 
In a message dated 4/6/2010 2:19:03 A.M. Eastern Daylight Time,  
amps-request at contesting.com writes:

Message:  6
Date: Mon, 05 Apr 2010 19:03:07 -1000
From:  leewical at lava.net
Subject: [Amps] Look for a source of 240 VAC meter
To:  amps at contesting.com
Message-ID:  <20100405190307.vt5mvp33gpww04cc at webmail.lava.net>
Content-Type:  text/plain;   charset=ISO-8859-1; DelSp="Yes";
format="flowed"

i am lookinjg for a source of 240 BVAC analog  voltmeter. Any  leads??
lee