[Amps] CB amp directly coupled via cap to antenna

[Fuqua, Bill L]

What do you do with 75M phased verticals on a Packard? Must have been a long Packard.
Bill wa4lav

________________________________________
From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf Of Carl [km1h at jeremy.mv.com]
Sent: Thursday, April 08, 2010 6:22 PM
To: Phil Clements; amps at contesting.com
Subject: Re: [Amps] CB amp directly coupled via cap to antenna

Yes he did Phil, he had Eimac create a water cooled tetrode or him.

Also a KW amp with a transformerless PS.

And phased 75M verticals on his old Packard convertible in the 50's.

He was rather creative to say the least but he had the money to play with.

Carl
KM1H


----- Original Message -----
From: "Phil Clements" <philc at texascellnet.com>
To: <amps at contesting.com>
Sent: Thursday, April 08, 2010 4:19 PM
Subject: Re: [Amps] CB amp directly coupled via cap to antenna


>
>
>> Jo Jennings built an amp in the 60's that ran a mess of sweep tubes at
>> 2KW
>> PEP input. The output tank was a .01 cap. It was even published in QST.
>>
>> Carl
>> KM1H
> Did he not also build and publish a mobile amplifier using ceramic tubes
> that was built into the antenna?
>
> Phil, K5PC
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps