[Amps] 813's.. Parasitic suppressor's

[Roger]

Carl wrote:
>
> ** Thats why they make aluminum, it is less sensitive to the RF field.
> Ive had aluminum covers bent for Amp Supply (especially No Tunes), 
> Clipperton L, MLA-2500, and others. 1200W out on 10M in a Clipperton with 
> 100W is now easy and with no tube color.
>   
Carl, that just means you're not driving them hard enough <:-))
It probably means you won't have that output coax short either.  I'd say 
back when I was in business the largest number of problems I fixed on 
Clipertons was that coax shorting. The dielectric would melt from the 
heat in the final compartment  allowing the center conductor and braid 
to share the same space.

73

Roger (K8RI)
> Carl
> KM1H
>
>
>   
>> -- 
>> Vic, K2VCO
>> Fresno CA
>> http://www.qsl.net/k2vco/
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps 
>>     
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>