[Amps] rig vary RF out

[Gary Smith]

Any of the 756 series will let you adjust Po from zilch to 100w.   Small knob is to the left of "Mic Gain."
Gary...wa6fgi
  ----- Original Message ----- 
  From: Charles Harpole 
  To: rob at cboh.org ; amps at contesting.com 
  Sent: Sunday, January 31, 2010 11:01 PM
  Subject: [Amps] rig vary RF out



  Transceivers which allow front panel variation of RF out:

  K3

  FT-1000

  FT-1000MP

  FT-1000MP Mark 5

  FT-9000d

  FT-897

  IC-706

  IC-775dsp

  TS-950sdx

  TS-870

  And, those are only ones I personally know about.  Maybe I misunderstood your words.  73

  Charles Harpole k4vud at hotmail.com 

   




   
  > Date: Mon, 1 Feb 2010 01:54:33 -0500
  > From: rob at cboh.org
  > To: amps at contesting.com
  > Subject: Re: [Amps] Fw: Good amp to buy /amp notes
  > 
  > On Mon, Feb 01, 2010 at 12:50:25AM -0500, Roger wrote:
  > > I'll admit I've not seen them all but I've never seen a transmitter 
  > > where I couldn't vary the output.
  > 
  > Take a look at the Kenwood TS-430S, a rig that was marketed as late as
  > the mid-1980s: It has a carrier control, allowing the power level to
  > be controlled for CW ops and partially for AM, but the only voice level
  > control is the mic gain. FM is also fixed at about 40W.
  > 
  > (There were published after-market mods that add a power level control
  > to the 430.)
  > 
  > YMMV,
  > Rob / KD8WK
  > _______________________________________________
  > Amps mailing list
  > Amps at contesting.com
  > http://lists.contesting.com/mailman/listinfo/amps
         
  _______________________________________________
  Amps mailing list
  Amps at contesting.com
  http://lists.contesting.com/mailman/listinfo/amps