[Amps] HB amps - what you can build with no tools

Alex Eban alexeban at gmail.com
Mon Feb 1 23:18:54 PST 2010


That was the Masonic spirit, guys!
Alex	4Z5KS 

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Gary Smith
Sent: Tuesday, February 02, 2010 8:15 AM
To: Amps at contesting.com
Subject: Re: [Amps] HB amps - what you can build with no tools

I was visiting a friend in MA who was doing some repair work to his house
which was built by shakers over 200 years ago. There was a part of the inner
wall removed showing the infrastructure. He pointed out the detail the
craftsmen had done to the innermost parts of the woodwork where no one would
ever see them. He explained that to them, that to leave even the inner parts
of the construction as less than perfect would be to disrespect the higher
power and with that, every piece of wood behind the inner wall was smoothed
as if it were sanded with fine grit paper. It was quite beautiful to see.

Bet they would have made some beautiful radio gear.

Gary
KA1J

> My amp building elmer told me once...
> 
> A hole that you cannot see is a perfectly drilled hole.  And a jagged 
> hole with trim covering the jagged hole is also a perfectly formed hole.
> 
> A guy can cover up a lot of rough cut sins with this philosophy and 
> only when a guy takes the thing apart physically would he see it.
> 
> 73/jeff/ac0c
> 
> 
> --------------------------------------------------
> From: "Ryan Foster" <foster.ryan at gmail.com>
> Sent: Monday, February 01, 2010 10:32 PM
> To: <amps at contesting.com>
> Subject: Re: [Amps] HB amps - what you can build with no tools
> 
> > I second this question!
> >
> > Also what gauge steel is that?
> >
> > --Ryan w8cya
> >
> > On Mon, Feb 1, 2010 at 9:03 PM, Roger <sub1 at rogerhalstead.com> wrote:
> >
> >> Very nice job of construction.
> >>
> >> How did you fold the edges of the channel across the top, just in 
> >> front of the tube?
> >> And...for the record, with all the anti, this and that I have on 
> >> here, I saw no warnings of any problems.
> >>
> >> 73
> >>
> >> Roger (K8RI)
> >>
> >>
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> > 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 


_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps



More information about the Amps mailing list