[Amps] GU 74 operating parameters
Ulf Tjerneld
star at frizon.org
Thu Jan 7 06:35:04 PST 2010
Yet there are many commercial amp manufacturers, Acom among them, running GU74 on a plate voltage well above 2500 volts and at the same time claiming a 1 KW output. That means they are really exceeding the specs.
73's Ulf SM0NOR
7 jan 2010 kl. 02.32 skrev Bill, W6WRT:
> ORIGINAL MESSAGE:
>
> On Wed, 6 Jan 2010 19:56:03 +0100, Karl-Arne Markström <sm0aom at telia.com> wrote:
>
>> First, the quoted limits apply to the 4CX800, for the Russian GU74B they are
>> 2000V and 0,5 A respectively.
>
> REPLY:
>
> There seems to be some confusion as to what specs apply. According to
>
> http://frank.pocnet.net/sheets/018/g/GU74B.pdf
>
> The max anode current is .75 A, not .5.
>
> In any event, the tube specs are different from a 4CX800A, despite what RF Parts
> spec sheet says. For one thing, the plate diss is only 600 watts, not 800.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list