January 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Jan 1 05:43:14 PST 2010
Ending: Sun Jan 31 23:13:52 PST 2010
Messages: 649

• [Amps] Wanted: About 12 150-250 pf 5KV+ doorknob caps   Jeff Blaine AC0C
• [Amps] L section of Pi-L filter   Jeff Blaine AC0C
• [Amps] WTB: 800 watt-1KW amp   Jeff Blaine AC0C
• [Amps] Used tubes   Jeff Blaine AC0C
• [Amps] Good amp to buy maybe build..   Jeff Blaine AC0C
• [Amps] Drake L-7 Not sure of hookup   Bob AD5VJ
• [Amps] Drake L-7 Not sure of hookup   Bob AD5VJ
• [Amps] 30S-1 Questions   Cecil Acuff
• [Amps] Ten Tec Centurion   Rob Atkinson
• [Amps] which HV connector to use?   Rob Atkinson
• [Amps] which HV connector to use?   Rob Atkinson
• [Amps] Good amp to buy   Rob Atkinson
• [Amps] Good amp to buy   Rob Atkinson
• [Amps] Good amp to buy maybe build?   Rob Atkinson
• [Amps] Good amp to buy maybe build?   Rob Atkinson
• [Amps] Good amp to buy (or something like that)   Rob Atkinson
• [Amps] Good amp to buy maybe build   Rob Atkinson
• [Amps] Good amp to buy (or something like that)   Rob Atkinson
• [Amps] Good amp to buy (or something like that)   Rob Atkinson
• [Amps] alpha 76a   Jim Barber
• [Amps] which HV connector to use?   Jim Barber
• [Amps] Source for large purchase of toroids?   Jim Barber
• [Amps] Source for large purchase of toroids?   Jim Barber
• [Amps] Source for large purchase of toroids?   Jim Barber
• [Amps] Amp panels - an alternative to silkscreening   Jim Barber
• [Amps] Source for large purchase of toroids?   Mark Beckwith
• [Amps] Need #9 Allen wrench MUCHO   Larry Benko
• [Amps] Plate Choke Resonances   Larry Benko
• [Amps] Plate Choke Resonances   Larry Benko
• [Amps] Plate Choke Resonances   Larry Benko
• [Amps] Advice: harmonics from Alpha 91B on 160   Larry Benko
• [Amps] 813's on 160.   Bill, W6WRT
• [Amps] GU 74 operating parameters   Bill, W6WRT
• [Amps] Ten Tec Centurion   Bill, W6WRT
• [Amps] Plate Chokes.... Yet Again....   Bill, W6WRT
• [Amps] which HV connector to use?   Bill, W6WRT
• [Amps] Which HV connector to use.   Bill, W6WRT
• [Amps] which HV connector to use?   Bill, W6WRT
• [Amps] Chimney's   Bill, W6WRT
• [Amps] (Perhaps) A plate choke too far ...   Bill, W6WRT
• [Amps] filament choke screws   Bill, W6WRT
• [Amps] RF issue   Bill, W6WRT
• [Amps] Good amp to buy   Bill, W6WRT
• [Amps] Good amp to buy   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Building an Amp & Metal Working is an Art.   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] pulse tuning   Bill, W6WRT
• [Amps] pulse tuning   Bill, W6WRT
• [Amps] Building an Amp & Metal Working is an Art.   Bill, W6WRT
• [Amps] Pulse tuning   Bill, W6WRT
• [Amps] Pulse tuning   Bill, W6WRT
• [Amps] Pulse tuning   Bill, W6WRT
• [Amps] Metal work.   Bill, W6WRT
• [Amps] Metal work.   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] Silk screen alternatives   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] Silk screen alternatives   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Bill, W6WRT
• [Amps] Good amp to buy maybe build   Bill, W6WRT
• [Amps] Good amp to buy (or something like that)   Bill, W6WRT
• [Amps] I dont accept answers to why did Heath die?   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Plate Choke Resonances   Bill, W6WRT
• [Amps] Fw: Good amp to buy /amp notes   Bill, W6WRT
• [Amps] Good amp to buy maybe build..   Robert Briggs
• [Amps] Building an Amp & Metalworking is an Art.   Robert Briggs
• [Amps] KK5DR's ferrite loaded plate chokes.   Jim Brown
• [Amps] KK5DR's ferrite loaded   Jim Brown
• [Amps] KK5DR's ferrite loaded   Jim Brown
• [Amps] Source for large purchase of toroids?   Jim Brown
• [Amps] Source for large purchase of toroids?   Jim Brown
• [Amps] Source for large purchase of toroids?   Jim Brown
• [Amps] Ferrite sources   Jim Brown
• [Amps] Plate Choke Resonances   Jim Brown
• [Amps] Plate Choke Resonances   Jim Brown
• [Amps] Good amp to buy   Lee Buller
• [Amps] Good amp to buy   Lee Buller
• [Amps] Testing tubes for an Alpha 78   Carl
• [Amps] 813's on 160.   Carl
• [Amps] Right mounting of HV oilfilled C's?   Carl
• [Amps] L section of Pi-L filter   Carl
• [Amps] GU 74 operating parameters   Carl
• [Amps] Re Henry 2KD2 Amplifier   Carl
• [Amps] Re Henry 2KD2 Amplifier   Carl
• [Amps] alpha 76a   Carl
• [Amps] WTB: 800 watt-1KW amp   Carl
• [Amps] WTB: 800 watt-1KW amp   Carl
• [Amps] which HV connector to use?   Carl
• [Amps] which HV connector to use?   Carl
• [Amps] Which HV connector to use.   Carl
• [Amps] which HV connector to use?   Carl
• [Amps] Failure: SB-220 bias supply (Harbach board)   Carl
• [Amps] NCL-2000 mods   Carl
• [Amps] which HV connector to use?   Carl
• [Amps] Plate relay for NCL-2000   Carl
• [Amps] (Perhaps) A plate choke too far ...   Carl
• [Amps] (Perhaps) A plate choke too far ...   Carl
• [Amps] 8877 bad date codes   Carl
• [Amps] 4CX300a Seal Leaks   Carl
• [Amps] KK5DR's ferrite loaded plate chokes.   Carl
• [Amps] filament choke screws   Carl
• [Amps] Source for large purchase of toroids?   Carl
• [Amps] Massive transformer   Carl
• [Amps] RF issue   Carl
• [Amps] Another massive transformer   Carl
• [Amps] Massive transformer...redux 106 pounds   Carl
• [Amps] HELP Modifications for a Kenwood TL922   Carl
• [Amps] HELP Modifications for a Kenwood TL922   Carl
• [Amps] HELP Modifications for a Kenwood TL922   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] Ameritron (et. al.) filament voltages   Carl
• [Amps] Ameritron (et. al.) filament voltages   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy   Carl
• [Amps] 6C21   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy   Carl
• [Amps] 6C21   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Good amp to buy maybe build?   Carl
• [Amps] 6C21   Carl
• [Amps] 6C21   Carl
• [Amps] Good amp to buy maybe build..   Carl
• [Amps] Good amp to buy maybe build..   Carl
• [Amps] Building an Amp & Metal Working is an Art.   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] here's some amplifier art to look at!!   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] Tuning amplifiers   Carl
• [Amps] here's some amplifier art to look at!!   Carl
• [Amps] Silk screen alternatives   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] Good amp to buy   Carl
• [Amps] Plate Choke Resonances   Carl
• [Amps] which HV connector to use?   Paul Christensen
• [Amps] which HV connector to use?   Paul Christensen
• [Amps] External QSK   Paul Christensen
• [Amps] Ameritron (et. al.) filament voltages   Paul Christensen
• [Amps] BNC HV connectors   John E. Cleeve
• [Amps] Chimney's   John E. Cleeve
• [Amps] which HV connector to use?   Phil Clements
• [Amps] which HV connector to use?   Phil Clements
• [Amps] Which HV connector to use.   Phil Clements
• [Amps] Layout of tube   Phil Clements
• [Amps] Massive transformer   Phil Clements
• [Amps] Good amp to buy maybe build..   Phil Clements
• [Amps] Ameritron AL-80A Receive muted - relay?   Bill Coleman
• [Amps] WTB: 800 watt-1KW amp   James Colville
• [Amps] Plate Chokes... Yet again...   James Colville
• [Amps] Need #9 Allen wrench MUCHO   James Colville
• [Amps] Is this thing on?   James Colville
• [Amps] Plate Chokes.... Yet Again....   James Colville
• [Amps] Plate Chokes.... Yet Again....   James Colville
• [Amps] which HV connector to use?   James Colville
• [Amps] which HV connector to use?   James Colville
• [Amps] (Perhaps) A plate choke too far ...   James Colville
• [Amps] Chimney's   James Colville
• [Amps] Source GU-84B fil xfmr   James Colville
• [Amps] HV connector   James Colville
• [Amps] KK5DR's ferrite loaded plate chokes.   James Colville
• [Amps] Source for large purchase of toroids?   James Colville
• [Amps] Panel Meters Wanted   James Colville
• [Amps] Meters Wanted Fulfiled!   James Colville
• [Amps] Layout of tube   James Colville
• [Amps] Henry 2KD input SWR   James Colville
• [Amps] Layout of tube   James Colville
• [Amps] Plate Choke Resonances   James Colville
• [Amps] Plate Choke Resonances   James Colville
• [Amps] Good amp to buy maybe build   James Colville
• [Amps] 8877 Homebrew Pictures   James Colville
• [Amps] Emtron Australian Amps   Roger Cooper
• [Amps] which HV connector to use?   Craig
• [Amps] Used tubes   David H Craig
• [Amps] which HV connector to use?   David H Craig
• [Amps] I dont accept answers to why did Heath die?   David H Craig
• [Amps] Ameritron (et. al.) filament voltages   Chuck Curran
• [Amps] 30S-1 Questions   Chuck Curran
• [Amps] Ameritron (et. al.) filament voltages   David Cutter
• [Amps] Silk screen alternatives   David Cutter
• [Amps] Metal work.   David Cutter
• [Amps] Plate Choke Resonances   David Cutter
• [Amps] GU 74 operating parameters   DF3KV
• [Amps] FAN CFM   MIKE DURKIN
• [Amps] FAN CFM   MIKE DURKIN
• [Amps] Used tubes   MIKE DURKIN
• [Amps] Used tubes   MIKE DURKIN
• [Amps] Used tubes   MIKE DURKIN
• [Amps] Chimney's   MIKE DURKIN
• [Amps] KK5DR's ferrite loaded   MIKE DURKIN
• [Amps] Layout of tube   MIKE DURKIN
• [Amps] Layout of tube   MIKE DURKIN
• [Amps] Layout of tube   MIKE DURKIN
• [Amps] HELP Modifications for a Kenwood TL922   MIKE DURKIN
• [Amps] 8877 date codes   Dan
• [Amps] Source for large purchase of toroids?   Dan
• [Amps] Macaw PRM-1 manual   Jim Dawson
• [Amps] Manual...   Jim Dawson
• [Amps] Need #9 Allen wrench MUCHO   Paul Decker
• [Amps] Source for large purchase of toroids?   Paul Decker
• [Amps] which HV connector to use?   Alex Eban
• [Amps] Chimney's   Alex Eban
• [Amps] Amps for sale...maybe   Alex Eban
• [Amps] Good amp to buy   Val Erwin
• [Amps] Re Henry 2KD2 Amplifier   Fern
• [Amps] 4CX300a Seal Leaks   John Finner
• [Amps] 4CX300a Seal Leaks   John Finner
• [Amps] 4CX300a Seal Leaks   John Finner
• [Amps] Good amp to buy maybe build?   Martin A Flynn
• [Amps] AL 811 Tuned input/output issue   Ryan Foster
• [Amps] which HV connector to use?   Ryan Foster
• [Amps] Good amp to buy maybe build?   Ryan Foster
• [Amps] Henry 2KD Classic desktop input SWR issue   Donald Fox
• [Amps] Henry 2K Classic desktop input SWR issue.   Donald Fox
• [Amps] Henry 2KD input SWR   Donald Fox
• [Amps] condition 4-1000A tubes?   Fuqua, Bill L
• [Amps] condition 4-1000A tubes?   Fuqua, Bill L
• [Amps] 6C21   Fuqua, Bill L
• [Amps] Good amp to buy maybe build?   Fuqua, Bill L
• [Amps] 6C21   Fuqua, Bill L
• [Amps] Good amp to buy maybe build..   Fuqua, Bill L
• [Amps] Tuning amplifiers   Fuqua, Bill L
• [Amps] Tuning amplifiers   Fuqua, Bill L
• [Amps] Building an Amp & Metal Working is an Art.   Fuqua, Bill L
• [Amps] Building an Amp & Metal Working is an Art.   Fuqua, Bill L
• [Amps] Tesla Effect - what the heck is that?   Fuqua, Bill L
• [Amps] Tesla Effect - what the heck is that?   Fuqua, Bill L
• [Amps] why did Heath die?   Fuqua, Bill L
• [Amps] I dont accept answers to why did Heath die?   Fuqua, Bill L
• [Amps] Ready built Tetrode Boards for sale in UK   Ian White GM3SEK
• [Amps] which HV connector to use?   Ian White GM3SEK
• [Amps] Single pole Millen HV connectors.   Ian White GM3SEK
• [Amps] which HV connector to use?   Ian White GM3SEK
• [Amps] Source for large purchase of toroids?   Ian White GM3SEK
• [Amps] Need help with ARD 230A   George
• [Amps] Alpha 78 Control Circuit 'Issue'   Paul Gerhardt
• [Amps] Alpha 78 Control Circuit 'Issue'   Paul Gerhardt
• [Amps] Alpha 78 Control Circuit 'Issue'   Paul Gerhardt
• [Amps] Does anyone have a HiPot tester they would like to 'rent'??   Robert Groh
• [Amps] Building an amp   Robert Groh
• [Amps] Tesla Effect - what the heck is that?   Robert Groh
• [Amps] Advice: harmonics from Alpha 91B on 160   Robert Groh
• [Amps] Plate Choke Resonances   Robert Groh
• [Amps] KK5DR's ferrite loaded plate chokes.   Missouri Guy
• [Amps] Source for large purchase of toroids?   Missouri Guy
• [Amps] GU 74 operating parameters   Dave Hachadorian
• [Amps] trouble shooting Hunter 2000c   Dave Hachadorian
• [Amps] trouble shooting Hunter 2000c   Dave Hachadorian
• [Amps] Good amp to buy   Dave Hachadorian
• [Amps] Good amp to buy   Dave Hachadorian
• [Amps] Good amp to buy   Dave Hachadorian
• [Amps] Fw: Good amp to buy   Dave Harmon
• [Amps] alpha 87a warning   Charles Harpole
• [Amps] Need #9 Allen wrench MUCHO   Charles Harpole
• [Amps] 9mm Allen   Charles Harpole
• [Amps] Need #9 Allen wrench MUCHO   Charles Harpole
• [Amps] Need #9 Allen wrench MUCHO   Charles Harpole
• [Amps] Need #9 Allen wrench MUCHO   Charles Harpole
• [Amps] Need #9 Allen wrench   Charles Harpole
• [Amps] Allen wrench solved.... Thanks   Charles Harpole
• [Amps] why did Heath die?   Charles Harpole
• [Amps] I dont accept answers to why did Heath die?   Charles Harpole
• [Amps] rig vary RF out   Charles Harpole
• [Amps] trouble shooting Hunter 2000c   Charles Hedrick
• [Amps] filament choke screws   Charles Hedrick
• [Amps] Filament choke screws   Charles Hedrick
• [Amps] RF issue   Charles Hedrick
• [Amps] Henry 2KD2 Amplifier   Daniel Hileman
• [Amps] WTB: HF Amplifier   Daniel Hileman
• [Amps] WTB: 800 watt-1KW amp   Daniel Hileman
• [Amps] 811H Plate Current   Daniel Hileman
• [Amps] More on the 811H   Daniel Hileman
• [Amps] More on the 811H   Daniel Hileman
• [Amps] which HV connector to use?   Mark Hill
• [Amps] which HV connector to use?]   Gary Hinson
• [Amps] Right mounting of HV oilfilled C's?   Thomas Hoeppe
• [Amps] Right mounting of HV oilfilled C's?   Thomas Hoeppe
• [Amps] condition 4-1000A tubes?   Dennis A. Homerick
• [Amps] HELP Modifications for a Kenwood TL922   BEHIELS JEAN-PIERRE
• [Amps] Ameritron (et. al.) filament voltages   Joe Subich, W4TV
• [Amps] Good amp to buy   Joe Subich, W4TV
• [Amps] Ameritron (et. al.) filament voltages   Roger D Johnson
• [Amps] Good amp to buy   Bill K2OWR
• [Amps] Good amp to buy   Bill K2OWR
• [Amps] Good amp to buy   Bill K2OWR
• [Amps] Good amp to buy maybe build?   Bill K2OWR
• [Amps] Good amp to buy maybe build?   Bill K2OWR
• [Amps] SVHFS 2010 Conference, Call For Papers   Robin Midgett K4IDC
• [Amps] SVHFS 2010 Conference, Call For Papers   Robin Midgett K4IDC
• [Amps] HV connector   K9FFK
• [Amps] Good amp to buy   Gary K9GS
• [Amps] Good amp to buy   Gary K9GS
• [Amps] TL-922   Edwin Karl
• [Amps] NCL-2000 mods   Steve Katz
• [Amps] NCL-2000 mods   Steve Katz
• [Amps] BNC HV connectors   Dr. David Kirkby
• [Amps] (Perhaps) A plate choke too far ...   Dr. David Kirkby
• [Amps] KK5DR's ferrite loaded plate chokes.   Dr. David Kirkby
• [Amps] KK5DR's ferrite loaded plate chokes.   Dr. David Kirkby
• [Amps] which HV connector to use?]   Dr. David Kirkby
• [Amps] Massive transformer   Paul Kraemer
• [Amps] WTB 3-500Z   Phil LaMarche
• [Amps] Good amp to buy   Phil LaMarche
• [Amps] HELP Modifications for a Kenwood TL922   Colin Lamb
• [Amps] HELP Modifications for a Kenwood TL922   Colin Lamb
• [Amps] which HV connector to use?   Hardy Landskov
• [Amps] which HV connector to use?]   Hardy Landskov
• [Amps] Advice: harmonics from Alpha 91B on 160   Hardy Landskov
• [Amps] (Perhaps) A plate choke too far ...   Larry
• [Amps] Plate Choke Resonances   Tim Long
• [Amps] Plate Choke Resonances   Tim Long
• [Amps] HV connector   John Lyles
• [Amps] Ferrite sources   John Lyles
• [Amps] Tuning tetrode amps   John Lyles
• [Amps] What is Svetlana 4CX1600B Worth?   Jeff Maass
• [Amps] What is Svetlana 4CX1600B Worth?   Jeff Maass
• [Amps] Henry 2KD2 Amplifier   Jeff Maass
• [Amps] Right mounting of HV oilfilled C's?   Karl-Arne Markström
• [Amps] GU 74 operating parameters   Karl-Arne Markström
• [Amps] L section of Pi-L filter   Karl-Arne Markström
• [Amps] Kenwood TL 922 Repair Manual for buy it....   Eduardo de Vera Mateo
• [Amps] Kenwood TL 922 Repair Manual for buy it....   Eduardo de Vera Mateo
• [Amps] Tl 922 amp. more problems.......   Eduardo de Vera Mateo
• [Amps] Tl 922 amp. more problems.......   Eduardo de Vera Mateo
• [Amps] Silk screen alternatives   Alton McConnell
• [Amps] Amps for sale...maybe   Glenn McNeil
• [Amps] KK5DR's ferrite loaded plate chokes.   Mike
• [Amps] RF issue   Mike
• [Amps] Fw: Good amp to buy /amp notes   Mike
• [Amps] Chimney's   Mike McCarthy, W1NR
• [Amps] What are the drawbacks of using a tube running, relatively low voltage and high current?   Manfred Mornhinweg
• [Amps] KK5DR's ferrite loaded plate chokes.   Manfred Mornhinweg
• [Amps] KK5DR's ferrite loaded   Manfred Mornhinweg
• [Amps] KK5DR's ferrite loaded   Manfred Mornhinweg
• [Amps] Silk screen alternatives   Manfred Mornhinweg
• [Amps] Silk screen alternatives   Manfred Mornhinweg
• [Amps] Need #9 Allen wrench MUCHO   Robert Morris
• [Amps] Massive transformer   Robert Morris
• [Amps] Good amp to buy maybe build?   Robert Morris
• [Amps] Tesla Effect - what the heck is that?   Robert Morris
• [Amps] TL922 bandswitch   Walter Muth
• [Amps] AL 811 Tuned input/output issue   David N.
• [Amps] technical documentation for Viewstar PT-1000A Amplifiers.   VASILE POP
• [Amps] which HV connector to use?   Felipe Ceglia - PY1NB
• [Amps] which HV connector to use?   Felipe Ceglia - PY1NB
• [Amps] [CQ-Contest] K3 KIT PICTURES?   Felipe Ceglia - PY1NB
• [Amps] [CQ-Contest] K3 KIT PICTURES?   Felipe Ceglia - PY1NB
• [Amps] TS430 to a SB230 Amp   Robert Parham
• [Amps] Massive transformer   Gary Patterson
• [Amps] Massive transformer...redux 106 pounds   Gary Patterson
• [Amps] Massive transformer...redux 106 pounds   Gary Patterson
• [Amps] Gary Coffman KE4ZV   Gary Patterson
• [Amps] pulse tuning vs two-tone   Danny Pease
• [Amps] 3 1/8 EIA flange adaptor wanted   Peter
• [Amps] What is Svetlana 4CX1600B Worth?   Alek Petkovic
• [Amps] What is Svetlana 4CX1600B Worth?   Alek Petkovic
• [Amps] Amps for sale...maybe   Alek Petkovic
• [Amps] condition 4-1000A tubes?   Alek Petkovic
• [Amps] HELP Modifications for a Kenwood TL922   Alek Petkovic
• [Amps] 811H Plate Current   Alek Petkovic
• [Amps] More on the 811H   Alek Petkovic
• [Amps] Ameritron (et. al.) filament voltages   Alek Petkovic
• [Amps] Ameritron (et. al.) filament voltages   Alek Petkovic
• [Amps] Ameritron (et. al.) filament voltages   Alek Petkovic
• [Amps] Fw: Good amp to buy /amp notes   Alek Petkovic
• [Amps] Fw: Good amp to buy /amp notes   Alek Petkovic
• [Amps] Fw: Good amp to buy /amp notes   Alek Petkovic
• [Amps] why did Heath die?   Alek Petkovic
• [Amps] Tesla Effect - what the heck is that?   la7sl Nils Petter
• [Amps] Is this thing on?   Randall, Randy
• [Amps] Good amp to buy   Randall, Randy
• [Amps] Good amp to buy   Randall, Randy
• [Amps] Good amp to buy   Randall, Randy
• [Amps] Good amp to buy maybe build?   Randall, Randy
• [Amps] Emtron Australian Amps   Doug Renwick
• [Amps] WTB 8877/3CX1500   Doug Renwick
• [Amps] Amps for sale...maybe   Doug Renwick
• [Amps] FAN CFM   Roger
• [Amps] Alpha 87A Alphamax upgrade   Roger
• [Amps] What are the drawbacks of using a tube running relatively low voltage and high current?   Roger
• [Amps] Re Henry 2KD2 Amplifier   Roger
• [Amps] What are the drawbacks of using a tube running, relatively low voltage and high current?   Roger
• [Amps] Emtron Australian Amps   Roger
• [Amps] Used tubes   Roger
• [Amps] Plate relay for NCL-2000   Roger
• [Amps] Chimney's   Roger
• [Amps] Source GU-84B fil xfmr   Roger
• [Amps] Chimney's   Roger
• [Amps] 8877 bad date codes   Roger
• [Amps] Amps for sale...maybe   Roger
• [Amps] Amps for sale...maybe   Roger
• [Amps] Amps for Sale   Roger
• [Amps] Massive transformer   Roger
• [Amps] Henry 2KD input SWR   Roger
• [Amps] Layout of tube   Roger
• [Amps] Good amp to buy   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Good amp to buy   Roger
• [Amps] 6C21   Roger
• [Amps] Ameritron (et. al.) filament voltages   Roger
• [Amps] Good amp to buy maybe build..   Roger
• [Amps] Building an Amp & Metal Working is an Art.   Roger
• [Amps] Good amp to buy maybe build..   Roger
• [Amps] Building an Amp & Metal Working is an Art.   Roger
• [Amps] Fw: Good amp to buy /amp notes   Roger
• [Amps] here's some amplifier art to look at!!   Roger
• [Amps] Fw: Good amp to buy /amp notes   Roger
• [Amps] Good amp to buy maybe build..   Roger
• [Amps] Fw: Good amp to buy /amp notes   Roger
• [Amps] Good amp to buy maybe build..   Roger
• [Amps] Good amp to buy maybe build..   Roger
• [Amps] Fw: Good amp to buy /amp notes   Roger
• [Amps] Good amp to buy   Roger
• [Amps] why did Heath die?   Roger
• [Amps] Plate Choke Resonances   Roger
• [Amps] Good amp to buy maybe build?   Roger
• [Amps] I dont accept answers to why did Heath die?   Roger
• [Amps] I dont accept answers to why did Heath die?   Roger
• [Amps] Fw: Good amp to buy /amp notes   Roger
• [Amps] Source GU-84B fil xfmr   Roy
• [Amps] GU-84B fil xfmr...TNX   Roy
• [Amps] fil choke screws   Roy
• [Amps] external QSK box   Roy
• [Amps] LK-500ZA vs ZB   Roy
• [Amps] Re Henry 2KD2 Amplifier   RICHARD SOLOMON
• [Amps] which HV connector to use?   RICHARD SOLOMON
• [Amps] which HV connector to use?   RICHARD SOLOMON
• [Amps] which HV connector to use?   RICHARD SOLOMON
• [Amps] BNC HV connectors   RICHARD SOLOMON
• [Amps] WTB 8877/3CX1500   Gary Schafer
• [Amps] (Perhaps) A plate choke too far ...   Gary Schafer
• [Amps] (Perhaps) A plate choke too far ...   Gary Schafer
• [Amps] 8877 bad date codes   Gary Schafer
• [Amps] 8877 date codes   Gary Schafer
• [Amps] Baffling DUAL HV problem ! We need some help.   Gary Schafer
• [Amps] Source for large purchase of toroids?   Gary Schafer
• [Amps] 3 1/8 EIA flange adaptor wanted   Gary Schafer
• [Amps] 3 1/8 EIA flange adaptor wanted   Gary Schafer
• [Amps] GS35B grid current   Gary Schafer
• [Amps] pulse tuning vs two-tone   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Plate Choke Resonances   Gary Schafer
• [Amps] Tuning amplifiers   Gary Schafer
• [Amps] Tuning amplifiers   Gary Schafer
• [Amps] GS35B grid current   Gary Schafer
• [Amps] Plate Choke Resonances   Gary Schafer
• [Amps] Advice: harmonics from Alpha 91B on 160   Gary Schafer
• [Amps] Good amp to buy (or something like that)   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Plate Choke Resonances   Gary Schafer
• [Amps] Good amp to buy (or something like that)   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Good amp to buy maybe build?   Gary Schafer
• [Amps] Good amp to buy (or something like that)   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Plate Choke Resonances   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Fw: Good amp to buy /amp notes   Gary Schafer
• [Amps] Plate Choke Resonances   Gary Schafer
• [Amps] 9mm Allen   Richard Schmuke
• [Amps] 6C21   Barrie Smith
• [Amps] 6C21   Barrie Smith
• [Amps] Good amp to buy maybe build?   Barrie Smith
• [Amps] Re Henry 2KD2 Amplifier   Gary Smith
• [Amps] TenTec centurion   Gary Smith
• [Amps] Ten Tec Centurion   Gary Smith
• [Amps] WTB: 800 watt-1KW amp   Gary Smith
• [Amps] WTB: 800 watt-1KW amp   Gary Smith
• [Amps] External QSK   Gary Smith
• [Amps] Good amp to buy   Gary Smith
• [Amps] Good amp to buy   Gary Smith
• [Amps] Good amp to buy   Gary Smith
• [Amps] Good amp to buy   Gary Smith
• [Amps] 30S-1 Questions   Gary Smith
• [Amps] Ameritron (et. al.) filament voltages   Rob Stampfli
• [Amps] Ameritron (et. al.) filament voltages   Rob Stampfli
• [Amps] Fw: Good amp to buy /amp notes   Rob Stampfli
• [Amps] Fw: Good amp to buy /amp notes   Rob Stampfli
• [Amps] which HV connector to use?]   Edward Swynar
• [Amps] which HV connector to use?]   Edward Swynar
• [Amps] Good amp to buy   Edward Swynar
• [Amps] Good amp to buy maybe build?   Edward Swynar
• [Amps] Good amp to buy maybe build..   Edward Swynar
• [Amps] Good amp to buy maybe build..   Edward Swynar
• [Amps] Good amp to buy   Craig Taylor
• [Amps] Alpha 78 problem   Jim Thomson
• [Amps] Centurion 160m loading cap.   Jim Thomson
• [Amps] Millen red /black HV connector's.   Jim Thomson
• [Amps] Which HV connector to use.   Jim Thomson
• [Amps] Millen red /black HV connector's.   Jim Thomson
• [Amps] Single pole Millen HV connectors.   Jim Thomson
• [Amps] Which HV connector to use.   Jim Thomson
• [Amps] Which HV connector to use.   Jim Thomson
• [Amps] Plate chokes   Jim Thomson
• [Amps] Plate chokes   Jim Thomson
• [Amps] KK5DR's ferrite loaded plate chokes.   Jim Thomson
• [Amps] KK5DR's ferrite loaded plate chokes.   Jim Thomson
• [Amps] KK5DR's ferrite loaded plate chokes.   Jim Thomson
• [Amps] Baffling DUAL HV problem ! We need some help.   Jim Thomson
• [Amps] Good amp to buy /amp notes   Jim Thomson
• [Amps] Fw: Good amp to buy /amp notes   Jim Thomson
• [Amps] Fw: Good amp to buy /amp notes   Jim Thomson
• [Amps] Fw: Good amp to buy /amp notes   Jim Thomson
• [Amps] pulse tuning   Jim Thomson
• [Amps] Metal work.   Jim Thomson
• [Amps] Pulse tuning   Jim Thomson
• [Amps] Building an amp   Jim Thomson
• [Amps] HB amps   Jim Thomson
• [Amps] GU 74 operating parameters   Ulf Tjerneld
• [Amps] L section of Pi-L filter   Ulf Tjerneld
• [Amps] GU 74 operating parameters   Ulf Tjerneld
• [Amps] GU 74 operating parameters   Jim Tonne
• [Amps] (Perhaps) A plate choke too far ...   Angel Vilaseca
• [Amps] KK5DR's ferrite loaded   Angel Vilaseca
• [Amps] Failure: SB-220 bias supply (Harbach board)   Bill VanAlstyne W5WVO
• [Amps] which HV connector to use?]   Bill VanAlstyne W5WVO
• [Amps] Alpha 87A Alphamax upgrade   Dick Green WC1M
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] (Perhaps) A plate choke too far ...   Radio WC6W
• [Amps] condition 4-1000A tubes?   DAVE WHITE
• [Amps] condition 4-1000A tubes?   Dave White
• [Amps] Tesla Effect - what the heck is that?   Dave White
• [Amps] FS: 3-1000Z HB amp & ps   David J Windisch
• [Amps] which HV connector to use?   Ron Youvan
• [Amps] HELP Modifications for a Kenwood TL922   Ron Youvan
• [Amps] 3 1/8 EIA flange adaptor wanted   Ron Youvan
• [Amps] Ameritron (et. al.) filament voltages   Ron Youvan
• [Amps] Good amp to buy maybe build..   Ron Youvan
• [Amps] Fw: Good amp to buy /amp notes   Ron Youvan
• [Amps] Tuning amplifiers   Ron Youvan
• [Amps] Tuning amplifiers   Ron Youvan
• [Amps] Fw: Good amp to buy /amp notes   Ron Youvan
• [Amps] Chimney's   ZL2AAA
• [Amps] Good amp to buy maybe build?   ZL2AAA
• [Amps] ENI transistors   Baruch Zilbershatz
• [Amps] ENI amps and parts   Baruch Zilbershatz
• [Amps] why did Heath die?   Glen Zook
• [Amps] I dont accept answers to why did Heath die?   Glen Zook
• [Amps] Source for large purchase of toroids?   alexeban
• [Amps] Source for large purchase of toroids?   alexeban
• [Amps] WTB:Cubic 1500ZA amp   Brahmangou at aol.com
• [Amps] Henry 2KD2 Amplifier   Gudguyham at aol.com
• [Amps] Drake L-7 Not sure of hookup   Gudguyham at aol.com
• [Amps] Silk screen alternatives   K1SG at aol.com
• [Amps] 30S-1 Questions   K8MLM at aol.com
• [Amps] Henry 2KD Classic desktop input SWR issue   SECOPSYS at aol.com
• [Amps] trouble shooting Hunter 2000c   TexasRF at aol.com
• [Amps] Massive transformer   TexasRF at aol.com
• [Amps] condition 4-1000A tubes?   k8mlm at aol.com
• [Amps] condition 4-1000A tubes?   k8mlm at aol.com
• [Amps] HV connector   texasrf at aol.com
• [Amps] which HV connector to use?   texasrf at aol.com
• [Amps] which HV connector to use?   texasrf at aol.com
• [Amps] Chimney's   texasrf at aol.com
• [Amps] Source GU-84B fil xfmr   texasrf at aol.com
• [Amps] 4CX300a Seal Leaks   texasrf at aol.com
• [Amps] filament choke screws   texasrf at aol.com
• [Amps] Fwd: Good amp to buy   w1dxh at aol.com
• [Amps] tube source   wayne bachman
• [Amps] HELP Modifications for a Kenwood TL922   on4aef at base.be
• [Amps] HELP Modifications for a Kenwood TL922   on4aef at base.be
• [Amps] [Fwd: Cooling fan OEM for the SGC Cube???]   chas
• [Amps] Source for large purchase of toroids?   chas
• [Amps] Source for large purchase of toroids?   chas
• [Amps] Source for large purchase of toroids?   chas
• [Amps] [Fwd: Source for large purchase of toroids?   chas
• [Amps] Re Henry 2KD2 Amplifier   N7KA at comcast.net
• [Amps] HV Conn   N7KA at comcast.net
• [Amps] Need help with ARD 230A   k3rww at comcast.net
• [Amps] Need help with ARD 230A   k3rww at comcast.net
• [Amps] Need help with ARD 230A   k3rww at comcast.net
• [Amps] Alpha 87A Alphamax upgrade   kk2ed at comcast.net
• [Amps] Alpha 87A Alphamax upgrade   kk2ed at comcast.net
• [Amps] RF issue   LKBrownMD at cs.com
• [Amps] NCL-2000 mods   jim feldman
• [Amps] NCL-2000 mods   jim feldman
• [Amps] Amps Digest, Vol 85, Issue 49   jim feldman
• [Amps] Advice: harmonics from Alpha 91B on 160   gds
• [Amps] Source for large purchase of toroids?   gwatts
• [Amps] RF issue   donroden at hiwaay.net
• [Amps] Layout of tube   donroden at hiwaay.net
• [Amps] 3 1/8 EIA flange adaptor wanted   donroden at hiwaay.net
• [Amps] Ameritron (et. al.) filament voltages   donroden at hiwaay.net
• [Amps] Good amp to buy maybe build..   donroden at hiwaay.net
• [Amps] Titan 425 will not 'Standby'   j
• [Amps] Layout of tube   k7fm
• [Amps] HELP Modifications for a Kenwood TL922   k7fm
• [Amps] Ameritron (et. al.) filament voltages   k7fm
• [Amps] Amp panels - an alternative to silkscreening   k7fm
• [Amps] K75-40 Russian hv caps   k7rdx
• [Amps] which HV connector to use?   k7rdx
• [Amps] which HV connector to use?   k7rdx
• [Amps] which HV connector to use?   k7rdx
• [Amps] Millen red /black HV connector's.   k7rdx
• [Amps] which HV connector to use?   k7rdx
• [Amps] GS35B grid current   jeff millar
• [Amps] I dont accept answers to why did Heath die?   jeff millar
• [Amps] Good amp to buy   bill price
• [Amps] alpha 76a   budi santoso
• [Amps] alpha 76a   budi santoso
• [Amps] 813's on 160.   jerome schatten
• [Amps] Need #9 Allen wrench MUCHO   david sutton
• [Amps] Need #9 Allen wrench   david sutton
• [Amps] Fw: Good amp to buy   david sutton
• [Amps] WTB: 800 watt-1KW amp   n8de at thepoint.net
• [Amps] which HV connector to use?   n8de at thepoint.net
• [Amps] Massive transformer   n8de at thepoint.net
• [Amps] Another massive transformer   n8de at thepoint.net
• [Amps] Good amp to buy   n8de at thepoint.net
• [Amps] Plate relay for NCL-2000   uoba
• [Amps] WTB:Cubic 1500ZA amp   john.brewer at us.schneider-electric.com
• [Amps] I'm temporarily out of the office-Who to call   john.brewer at us.schneider-electric.com
• [Amps] Henry 2KD2 Amplifier   vk3pa at vk3pa.com
• [Amps] Layout of tube   vk3pa at vk3pa.com
• [Amps] kenwood tl 922 band switch   caroll wallace
• [Amps] Re Henry 2KD2 Amplifier   JTB ô¿ô
• [Amps] KK5DR's ferrite loaded   JTB ô¿ô

Last message date: Sun Jan 31 23:13:52 PST 2010
Archived on: Sun Jan 31 23:18:38 PST 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...