[Amps] Need #9 Allen wrench MUCHO

[Charles Harpole]

Dave, I may have to do the "nut thing" as u say.....  Thanks tip.

 



Charles Harpole k4vud at hotmail.com 


 


Date: Mon, 11 Jan 2010 05:09:29 -0800
From: sootydave at yahoo.com
Subject: Re: [Amps] Need #9 Allen wrench MUCHO
To: k4vud at hotmail.com; amps at contesting.com






Charles
Have you tryed a hex bolt with a few nuts tightend onto the thread? i have used this methade several times for those hard to find sizes.
just a thought.
73's
Dave kg4uxr

 
Brits with a southern call? how strange, only when you hear the accent.
see kg4uxr on :-

www.qrz.com/callsign/kg4uxr







From: Charles Harpole <k4vud at hotmail.com>
To: amps at contesting.com
Sent: Mon, January 11, 2010 5:49:21 AM
Subject: [Amps] Need #9 Allen wrench MUCHO


I have a serious need for a #9 Allen wrench or the English size just larger than 5/16"...



I need to drain the Hub City brand worm gear box which is on the crank up mechanism of my US Tower 70 ft.


As u may guess, a #10 is too big and I can not find a wrench smaller but larger than a #8.



If you can get same for me, please mail to me at below and I will send you money to pay back immediately.



A six or eight inch long wrench would be good, but I will take anything.  If u send in a bubble envelop, likely ok, and mark outside "used parts."



Help!    HUGE THANKS,  73



Charles Harpole

P. O. Box 1, Nakhon Chaisi

Nakhon Pathom  73120

Thailand






Charles Harpole k4vud at hotmail.com 



                        
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps