[Amps] condition 4-1000A tubes?

[k8mlm at aol.com]

Sure was a well spent dollar.  My 4-1000 beast is my favorite to  operate.
 
Bob
K8MLM
 
 
In a message dated 1/23/2010 2:32:57 P.M. Eastern Standard Time,  
mausoptik at btinternet.com writes:

Lol!  I bet that's the best dollar you ever spent,  Bob!

Dave G0OIL

--- On Sat, 23/1/10, k8mlm at aol.com  <k8mlm at aol.com> wrote:

From: k8mlm at aol.com  <k8mlm at aol.com>
Subject: Re: [Amps] condition 4-1000A tubes?
To:  DHomerick at neo.rr.com, amps at contesting.com
Date: Saturday, 23 January, 2010,  14:17

Happy New Year Dennis,

I just plug mine in and let it  rip.  That is one rugged tube.   When I 
first build my  4-1000 just for kicks I plugged in a 4-1000 I picked up at  
a 
HAMFEST  for $1.  It looked real bad and my intent was only to use it for   
working out the spacing, etc.  Well the filaments lit up with power,  it  
didn't 
arc with high voltage (5500 volts) and it put out over  1KW.  It's  been 
almost 20 years and the tube is still going  strong.

Bob
K8MLM


In a message dated 1/22/2010 4:41:12  P.M. Eastern Standard Time,  
DHomerick at neo.rr.com  writes:

Can  someone point out a good source of information on how  to properly 
condition a  4-1000A tube that has been on shelf for a  very long  time.

Thanks

Dennis,   w8nw
_______________________________________________
Amps mailing   list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps  mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps  mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps