[Amps] Layout of tube

[MIKE DURKIN]

Ok, yea its not for VHF, Just HF but was thinking about parasitics and all ....

 

Next thought is there a rule of thumb when stacking fans back-to-back to figure CFM and pressure ....

Like if i had 2 fans with 98.1CFM/0.28" blowing in series?

 

Mike

KC7NOA

 


 snip> 
> Hi Mike,
> 
> > I'm wanting to supply the tube on one side of the tube and put the blocking cap for the C.L.C. output 
> about 110Deg off around the tube. Will that make for any internal issues ETC. from 
> misbalance on the Anode ??
> 
> If I understand you correctly, looking down at the tube, the HV supply (connection to 
> the anode RF choke) is at 12 o'clock, and the blocking capacitor to the output tank 
> comes off at about 4 o'clock (or 8 o'clock). If that's what you mean, that should be 
> fine. (Unless you're working at VHF or UHF frequencies... then I don't have a clue as 
> to whether it's OK.)
> 
> 73,
> 
> 
> 
> George T Daughters, K6GT
> CU in the California QSO Party (CQP)
> October 2-3, 2010
> 
> 

 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/196390707/direct/01/