[Amps] trouble shooting Hunter 2000c
TexasRF at aol.com
TexasRF at aol.com
Fri Jan 8 11:17:53 PST 2010
Perhaps the new transformer has lower resistance windings, causing higher
turn on current flow and welded the switch contacts in a closed condition?
Does that amplifier have a surge limiting circuit for the AC input?
73,
Gerald K5GW
In a message dated 1/8/2010 10:11:37 A.M. Central Standard Time,
cchedrick at gmail.com writes:
Happy new year!
Well, recently I was operating this amp the power suddenly fell off ~200
watts so I went to shut it down. The power switch will not turn it off so
I
had to unplug it. Now, I have full plate voltage, plate current, and have
isolated the filament wires from the RF Choke to check that circuit, with
no
change. I'm stuck wondering how the AC is shorted to ground thus rendering
the switch inop. The transformer is a new Peter Dahl. Where to go next?
All suggestions will be greatly appreciated.
Tnx es 73,
Cam
WA4JKW
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list