[Amps] which HV connector to use?

[n8de at thepoint.net]

Felipe,
Why not use the single large pin connector used most often in  
home-brew amplifiers in the 60' and 70's ?
I have a few in a box.
Let me know if you'd like some.
73
Don
N8DE

p.s.  they are NOT FREE.

Quoting Felipe Ceglia - PY1NB <felipeceglia2 at gmail.com>:

> Hi,
>
> I need to choose a connector for plug the HV power supply to RF deck.
> Which one to choose?
>
> Is the amphenol ms-3106a-2817s a good idea? This one has 15 pins, and is
> used on harris RF-110 to connect PS to RF deck, but RF110's PS is only
> 2200 volts.
> Do you have information if this will survive 3500vdc without arcing? I
> got a spec sheet for it, but that was not clearly stated.
>
> 73 TU,
>
> Felipe Ceglia - PY1NB
> -------------------------------------------------------------------------------------
> PR1T team member /// Rio DX Group member /// Araucaria DX Group member
> http://www.dxwatch.com /// http://reversebeacon.net ///   
> http://riodxgroup.dxwatch.com
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>