[Amps] GS35b

[Mel]

Allan
 
I asked the same question 3 month ago on this same reflector:
 
First response
 
Second response
 
More info
 
I am running my tubes at 200 milliamps per tube which is about 20% -25% of my Cathode current, at about 3400 volts.  With 2 tubes, I used a figure of 1700 ohms for my Plate Impedence load.
 
I hope the links work and, I hope this helps out.
 
Mel
 
"Knock-Out-Zero-Won"
 
.

--- On Fri, 11/12/10, Allan Greening <vk3pa at vk3pa.com> wrote:


From: Allan Greening <vk3pa at vk3pa.com>
Subject: [Amps] GS35b
To: amps at contesting.com
Date: Friday, November 12, 2010, 10:09 PM


Wot value should the bias be set at for when ht is 3kv..
1 CW
2 SSB..
TU 73 es Dxis vk3pa
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps