November 2010 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Nov 1 03:39:58 PDT 2010
Ending: Tue Nov 30 14:56:14 PST 2010
Messages: 548

• [Amps] Plate blocking Cap   Bill, W6WRT
• [Amps] Cathode input circuit   Mike Lord
  • [Amps] Cathode input circuit   Dave M
  • [Amps] Cathode input circuit   Carl
  • [Amps] Cathode input circuit   Ron Youvan
• [Amps] HV rectifier strings - to bypass or not?   Jim Barber
• [Amps] Looking for design for 25-50W linear amplifier covering 50 MHz band   David Feldman
  • [Amps] Looking for design for 25-50W linear amplifier covering 50MHz band   Hardy Landskov
• [Amps] Gettering the GU-74B   Peter Junker
  • [Amps] Gettering the GU-74B   Kees - pa7two
• [Amps] Fwd: COLLINS AMPLIFIER 30S-1 NEW RELAYS   Joel Kornreich
• [Amps] HV rectifier strings - to bypass or not?   Carl
  • [Amps] HV rectifier strings - to bypass or not?   Jim W7RY
• [Amps] CORRECTION-COLLINS 30S-1 RELAYS (K201 and K203)   Joel Kornreich
• [Amps] 4CX250B/1000A Grid driven VS GG   Hsu
• [Amps] HV rectifier strings - to bypass or not?   Shane Youhouse
• [Amps] al1200 tuning slugs?   knormoyle at surfnetusa.com
• [Amps] al1200 tuning slugs?   Tony Brock-Fisher
• [Amps] Low Input SWR Amps Networks   w3hvq
  • [Amps] Low Input SWR Amps Networks   Bill, W6WRT
    • [Amps] Low Input SWR Amps Networks   donroden at hiwaay.net
      • [Amps] Low Input SWR Amps Networks   Roger D Johnson
      • [Amps] Low Input SWR Amps Networks   Bill, W6WRT
  • [Amps] Low Input SWR Amps Networks   Roger (K8RI)
• [Amps] My conclusion: Re: Low SWR Input Amps   w3hvq
  • [Amps] My conclusion: Re: Low SWR Input Amps   Jim W7RY
• [Amps] looking for 110 vdc coaxial relay   Fern
• [Amps] W8OHT---Light at end of SS amplifier-race tunnel   w3hvq
• [Amps] ICOM SOLID STATE AMP --   WA3GIN
• [Amps] Ameritron AL-572   pfizenmayer
  • [Amps] Ameritron AL-572   Carl
    • [Amps] AMP Supply LK-450   Mike
  • [Amps] Ameritron AL-572   Hal W5GHZ
• [Amps] filter caps   mikflathead at aol.com
  • [Amps] filter caps   Carl
• [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600 solid-state amplifier   Dick
• [Amps] time to death in the event of a blower failure   Jeff Blaine
  • [Amps] time to death in the event of a blower failure   Bill, W6WRT
  • [Amps] time to death in the event of a blower failure   k7fm
    • [Amps] time to death in the event of a blower failure   Jeff Blaine
  • [Amps] time to death in the event of a blower failure   Paul Christensen
    • [Amps] time to death in the event of a blower failure   Jeff Blaine
  • [Amps] time to death in the event of a blower failure   Gary Smith
    • [Amps] time to death in the event of a blower failure   Jeff Blaine
      • [Amps] time to death in the event of a blower failure   Carl
• [Amps] time to death in the event of a blower failure   TexasRF at aol.com
  • [Amps] smoke or cherry red   Charles Harpole
    • [Amps] smoke or cherry red   Bill, W6WRT
  • [Amps] time to death in the event of a blower failure   Carl
• [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600   Jim Garland
• [Amps] loss of cooling interlock   John Lyles
• [Amps] time to death in the event of a blower failure   Adrian
  • [Amps] time to death in the event of a blower failure   Bill, W6WRT
• [Amps] time to death in the event of a blower failure   Colin Lamb
• [Amps] Looking for applications/designs using Mitsubishi RD16HVF1   David Feldman
• [Amps] our amplifier in 2010 CQWW   Hsu
  • [Amps] our amplifier in 2010 CQWW   Larry K4AB
    • [Amps] our amplifier in 2010 CQWW   Doug Renwick
    • [Amps] our amplifier in 2010 CQWW   Jim W7RY
      • [Amps] our amplifier in 2010 CQWW   Tim Duffy K3LR
      • [Amps] our amplifier in 2010 CQWW   Jim W7RY
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   Jim Brown
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   WA3GIN
      • [Amps] our amplifier in 2010 CQWW   Hardy Landskov
      • [Amps] our amplifier in 2010 CQWW   Ken Brown
      • [Amps] our amplifier in 2010 CQWW   Jim W7RY
      • [Amps] our amplifier in 2010 CQWW   Hsu
      • [Amps] our amplifier in 2010 CQWW   Ken Brown
      • [Amps] our amplifier in 2010 CQWW   Jim W7RY
      • [Amps] our amplifier in 2010 CQWW   Hsu
      • [Amps] our amplifier in 2010 CQWW   DAVE WHITE
      • [Amps] our amplifier in 2010 CQWW   Roger (sub1)
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   Alek Petkovic
      • [Amps] our amplifier in 2010 CQWW   Jim W7RY
      • [Amps] our amplifier in 2010 CQWW   Alek Petkovic
      • [Amps] our amplifier in 2010 CQWW   Rob Stampfli
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   Vic K2VCO
      • [Amps] our amplifier in 2010 CQWW   donroden at hiwaay.net
• [Amps] icom/yaesu/k3 interface   gdaught6 at stanford.edu
• [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600   Phil & Debbie Salas
• [Amps] Do you think he'll get it?   Roger (K8RI)
• [Amps] ALC control with Yaesu FT- 897D and Ameritron ALS-600   Dick
• [Amps] our amplifier in 2010 CQWW   Dave White
  • [Amps] our amplifier in 2010 CQWW   donroden at hiwaay.net
    • [Amps] our amplifier in 2010 CQWW   Gary Smith
• [Amps] our amplifier in 2010 CQWW   Jim Thomson
• [Amps] our amplifier in 2010 CQWW   Jim Thomson
  • [Amps] our amplifier in 2010 CQWW   Jim W7RY
    • [Amps] our amplifier in 2010 CQWW   Doug Renwick
      • [Amps] our amplifier in 2010 CQWW   Jim Brown
      • [Amps] our amplifier in 2010 CQWW   Sam Carpenter
• [Amps] our amplifier in 2010 CQWW   Dave White
  • [Amps] our amplifier in 2010 CQWW   Sam Carpenter
    • [Amps] our amplifier in 2010 CQWW   DF3KV
      • [Amps] our amplifier in 2010 CQWW   Sam Carpenter
    • [Amps] our amplifier in 2010 CQWW   Henk Remijn PA5KT
• [Amps] our amplifier in 2010 CQWW   s-roabr at online.no
  • [Amps] our amplifier in 2010 CQWW   DF3KV
    • [Amps] our amplifier in 2010 CQWW   Jeff Blaine
      • [Amps] our amplifier in 2010 CQWW   Michael Tope
      • [Amps] our amplifier in 2010 CQWW   Carl
    • [Amps] our amplifier in 2010 CQWW   donroden at hiwaay.net
      • [Amps] our amplifier in 2010 CQWW   Steve Katz
      • [Amps] our amplifier in 2010 CQWW   Phil Clements
• [Amps] our amplifier in 2010 CQWW   David Robbins
  • [Amps] our amplifier in 2010 CQWW   Carl
    • [Amps] our amplifier in 2010 CQWW   David Cutter
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   David Cutter
      • [Amps] our amplifier in 2010 CQWW   Sam Carpenter
      • [Amps] our amplifier in 2010 CQWW   David Cutter
      • [Amps] our amplifier in 2010 CQWW   Sam Carpenter
      • [Amps] our amplifier in 2010 CQWW   Roger (sub1)
      • [Amps] our amplifier in 2010 CQWW   Ken Brown
• [Amps] 850 and 852   Lee Buller
  • [Amps] 850 and 852   Carl
    • [Amps] 850 and 852   JTB ô¿ô
• [Amps] our amplifier in 2010 CQWW   Paul Decker
• [Amps] our amplifier in 2010 CQWW   JOHN POWELL
  • [Amps] our amplifier in 2010 CQWW   Dave M
    • [Amps] our amplifier in 2010 CQWW   Steve Katz
      • [Amps] our amplifier in 2010 CQWW   Carl
      • [Amps] our amplifier in 2010 CQWW   Jeff Blaine
      • [Amps] our amplifier in 2010 CQWW   donroden at hiwaay.net
• [Amps] our amplifier in 2010 CQWW   Dave M
  • [Amps] our amplifier in 2010 CQWW   Carl
    • [Amps] our amplifier in 2010 CQWW   Dave M
      • [Amps] our amplifier in 2010 CQWW   Roger (sub1)
      • [Amps] our amplifier in 2010 CQWW   Mike
• [Amps] our amplifier in 2010 CQWW   Paul Decker
• [Amps] (Amps) our amplifier in 2010 CQWW   Robert Briggs
  • [Amps] (Amps) our amplifier in 2010 CQWW   Jim W7RY
• [Amps] 2 new Peter Dahl overstock xformers available   Jim Barber
• [Amps] russian doorknob caps   Kevin Normoyle
• [Amps] our amplifier in 2010 CQWW   Jim Thomson
• [Amps] our amplifier in 2010 CQWW   Jim Thomson
  • [Amps] our amplifier in 2010 CQWW   Jim Barber
  • [Amps] our amplifier in 2010 CQWW   Doug Renwick
    • [Amps] our amplifier in 2010 CQWW   Jim Brown
      • [Amps] our amplifier in 2010 CQWW   Joe Barnes
      • [Amps] our amplifier in 2010 CQWW   BJ VOUTE
      • [Amps] our amplifier in 2010 CQWW   Hsu
• [Amps] Those Amps. Those Videos   Alek Petkovic
  • [Amps] Those Amps. Those Videos   Carl
• [Amps] (no subject)   Chris Wright
• [Amps] Alpha 70/77 Series Replacement Meter Scales   Paul Christensen
  • [Amps] Alpha 70/77 Series Replacement Meter Scales   Carl
    • [Amps] Alpha 70/77 Series Replacement Meter Scales   Paul Christensen
• [Amps] RF Spike w/in SSB   WA3GIN
  • [Amps] RF Spike w/in SSB   Steve Katz
• [Amps] our amplifier in 2010 CQWW   Mike Saculla
• [Amps] time to death...   Roy
  • [Amps] time to death...   Jeff Blaine
  • [Amps] time to death...   Ian White GM3SEK
  • [Amps] time to death...   Andy GD0TEP
• [Amps] time to death...   Colin Lamb
  • [Amps] time to death...   Roger (K8RI)
    • [Amps] time to death...   Jeff Blaine
      • [Amps] time to death...   donroden at hiwaay.net
  • [Amps] time to death...   Bill, W6WRT
    • [Amps] time to death...   donroden at hiwaay.net
      • [Amps] time to death...   Bill, W6WRT
      • [Amps] time to death...   k7fm
      • [Amps] time to death...   donroden at hiwaay.net
      • [Amps] time to death...   Bill, W6WRT
      • [Amps] time to death...   Ron Youvan
• [Amps] (Fwd) icom/yaesu/k3 interface   gdaught6 at stanford.edu
• [Amps] time to death...   Jim Thomson
• [Amps] 2010 ARRL Handbook   kb5gt at cableone.net
  • [Amps] 2010 ARRL Handbook   Alek Petkovic
  • [Amps] 2010 ARRL Handbook   Dave M
  • [Amps] 2010 ARRL Handbook   Tim Duffy K3LR
  • [Amps] 2010 ARRL Handbook   Jim W7RY
    • [Amps] 2010 ARRL Handbook   Hsu
      • [Amps] 2010 ARRL Handbook   Roger (sub1)
      • [Amps] 2010 ARRL Handbook   Carl
      • [Amps] 2010 ARRL Handbook   Roger (sub1)
    • [Amps] 2010 ARRL Handbook   Jim Barber
• [Amps] Blower source   Dave M
  • [Amps] Blower source   Jim W7RY
    • [Amps] Blower source   Bill, W6WRT
      • [Amps] Blower source   Dave M
      • [Amps] Blower source   Vic K2VCO
      • [Amps] Blower source   Hsu
      • [Amps] EBM-Papst speed control (WAS: Blower source)   Jim Barber
      • [Amps] EBM-Papst speed control (WAS: Blower source)   Bill, W6WRT
  • [Amps] Blower source   Jim Barber
• [Amps] Fw: Emtron DX-1   David Douglass
• [Amps] 2010 Handbook   kb5gt at cableone.net
• [Amps] GS35b   Allan Greening
  • [Amps] GS35b   Mel
• [Amps] Blower Source   Roland AH6RR
  • [Amps] Blower Source   Carl
• [Amps] 2010 ARRL Handbook   Jim Thomson
• [Amps] Cleanpig shack III   Hsu
  • [Amps] [ham_amplifiers] Cleanpig shack III   Hsu
  • [Amps] [ham_amplifiers] Cleanpig shack III   Hsu
• [Amps] Blower Source   TexasRF at aol.com
  • [Amps] Blower Source   Roger (sub1)
    • [Amps] Blower Source   Mitch Cox
• [Amps] WTB RJ1A vacuum relay   Pete Raymond
  • [Amps] WTB RJ1A vacuum relay   Jim Brown
    • [Amps] WTB RJ1A vacuum relay   Rich Hallman - N7TR
    • [Amps] WTB RJ1A vacuum relay   Robert Dorchuck
    • [Amps] WTB RJ1A vacuum relay   Jim W7RY
      • [Amps] WTB RJ1A vacuum relay   Carl
      • [Amps] WTB RJ1A vacuum relay   Jeff Blaine
    • [Amps] WTB RJ1A vacuum relay   Han Higasa
  • [Amps] WTB RJ1A vacuum relay   Hector Garcia XE2K
• [Amps] Toshiba tube 7f41R   Allan Greening
  • [Amps] Toshiba tube 7f41R   Alek Petkovic
    • [Amps] Toshiba tube 7f41R   Alek Petkovic
  • [Amps] Toshiba tube 7f41R   Sam Carpenter
    • [Amps] Toshiba tube 7f41R   Sam Carpenter
      • [Amps] Toshiba tube 7f41R   Ron Youvan
• [Amps] Blower Source   TexasRF at aol.com
  • [Amps] Blower Source   Dave M
    • [Amps] Blower Source   Larry
    • [Amps] Blower Source   Jim W7RY
  • [Amps] Blower Source   Roger (sub1)
• [Amps] AL-82 Blowing fuses on startup   Gary McAdams
  • [Amps] AL-82 Blowing fuses on startup   Mitch Cox
    • [Amps] AL-82 Blowing fuses on startup   Jim W7RY
      • [Amps] AL-82 Blowing fuses on startup   Carl
      • [Amps] AL-82 Blowing fuses on startup   Mitch Cox
      • [Amps] AL-82 Blowing fuses on startup   Mitch Cox
    • [Amps] AL-82 Blowing fuses on startup   Gary Smith
      • [Amps] AL-82 Blowing fuses on startup   Robrk
      • [Amps] AL-82 Blowing fuses on startup   Dave Cole
      • [Amps] AL-82 Blowing fuses on startup   Dave Cole
      • [Amps] AL-82 Blowing fuses on startup   Gary Smith
      • [Amps] AL-82 Blowing fuses on startup   Jim W7RY
      • [Amps] AL-82 Blowing fuses on startup   Carl
      • [Amps] AL-82 Blowing fuses on startup   Mitch Cox
  • [Amps] AL-82 Blowing fuses on startup   Carl
    • [Amps] AL-82 Blowing fuses on startup   Glen Zook
• [Amps] Ameritron Parts   Lee Buller
• [Amps] Blower Source   Jim Thomson
• [Amps] ALS-1300   Baruch Zilbershatz
• [Amps] Searching manual for amplifier   Henk Remijn PA5KT
• [Amps] AL-82 Blowing fuses on startup   Gudguyham at aol.com
• [Amps] WTB:   Daniel Hileman
• [Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins)   Joel Kornreich
  • [Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins)   Paul Christensen
  • [Amps] Replacement of Collins bulbs in the 30S-1 amplifier (and other Collins)   Bill, W6WRT
• [Amps] Amps Digest, Vol 95, Issue 33   n1tq at charter.net
• [Amps] SSB LINEAR AMPLIFIER SB-2000 AS / FRONTIER ELECTRIC CO LTD JAPAN   pdussertvidalet at free.fr
• [Amps] QRO is alive and well..in Greece   Jim Thomson
  • [Amps] QRO is alive and well..in Greece   Henk Remijn PA5KT
    • [Amps] QRO is alive and well..in Greece   mikea
      • [Amps] QRO is alive and well..in Greece   Roger (sub1)
    • [Amps] QRO is alive and well..in Greece   Jim Thomson
    • [Amps] QRO is alive and well..in Greece ( maybe elsewhere )   donroden at hiwaay.net
  • [Amps] QRO is alive and well..in Greece   Ron Youvan
  • [Amps] QRO is alive and well..in Greece   Shane Youhouse
• [Amps] QRO is alive and well..in Greece   David Robbins
  • [Amps] QRO is alive and well..in Greece   tzikas tzik
• [Amps] Simpson 270 series 5 VOM   Pete Raymond
• [Amps] Simpson 270 series 5 VOM   TexasRF at aol.com
• [Amps] older 3k   MR.DEBONAIR
  • [Amps] older 3k   MIKE DURKIN
• [Amps] Attenuator needed   Vic K2VCO
  • [Amps] Attenuator needed   Jim Barber
    • [Amps] Attenuator needed   Vic K2VCO
      • [Amps] Attenuator needed   Larry Benko
      • [Amps] Attenuator needed   Vic K2VCO
  • [Amps] Attenuator needed   Larry
    • [Amps] Attenuator needed   Vic K2VCO
      • [Amps] Attenuator needed   Larry
  • [Amps] Attenuator needed   Jim Brown
    • [Amps] Attenuator needed   Vic K2VCO
• [Amps] 3CX1000A7   Jim Malone
  • [Amps] 3CX1000A7   Carl
• [Amps] AD5X attenuators for 100 Watt radios   MICHAEL ROEBUCK
• [Amps] Attenuator needed   Jim Brown
• [Amps] 3CX1000A7   Its from KE4VYN
  • [Amps] 3CX1000A7   N7KA at comcast.net
    • [Amps] 3CX1000A7   Its from KE4VYN
    • [Amps] 3CX1000A7   Roger (sub1)
      • [Amps] 3CX1000A7   Carl
      • [Amps] 3CX1000A7   Roger (sub1)
      • [Amps] 3CX1000A7   Carl
      • [Amps] 3CX1000A7   Roger (sub1)
      • [Amps] 3CX1000A7   Carl
      • [Amps] 3CX1000A7   Sam Carpenter
      • [Amps] 3CX1000A7   Roger (sub1)
  • [Amps] 3CX1000A7   Carl
  • [Amps] 3CX1000A7   Bill, W6WRT
• [Amps] 2010 Handbook   kb5gt at cableone.net
  • [Amps] 2010 Handbook   Carl
    • [Amps] 2010 Handbook   Andy GD0TEP
  • [Amps] 2010 Handbook   Roger (sub1)
  • [Amps] 2010 Handbook   Hsu
    • [Amps] 2010 Handbook   Bill, W6WRT
    • [Amps] 2010 Handbook   Roger (sub1)
      • [Amps] 2010 Handbook   Hsu
      • [Amps] 2010 Handbook   N1BUG
      • [Amps] 2010 Handbook   Carl
      • [Amps] 2010 Handbook   DJ7WW
      • [Amps] 2010 Handbook   Roger (sub1)
  • [Amps] 2010 Handbook   Jim W7RY
• [Amps] Sell or trade a 3CX1200Z7 tube   K3vw at aol.com
  • [Amps] Capacitor Values   Dave M
• [Amps] 3CX1000A7 and larger   John Lyles
• [Amps] Seeking advice on DC blocking caps for 6 m amp   John Farber
  • [Amps] Need advice on DCblockinig caps-My Text Body Didn't Come Through!   John Farber
    • [Amps] Need advice on DCblockinig caps-My Text Body Didn't ComeThrough!   Carl
• [Amps] Suggestions - I broke my amp - part 2   Larry
  • [Amps] Suggestions - I broke my amp - part 2   n8de at thepoint.net
    • [Amps] Suggestions - I broke my amp - part 2   Gary Schafer
      • [Amps] Suggestions - I broke my amp - part 2   Larry
      • [Amps] Suggestions - I broke my amp - part 2   Dave M
      • [Amps] Suggestions - I broke my amp - part 2   Larry
      • [Amps] Suggestions - I broke my amp - part 2   Larry
  • [Amps] Suggestions - I broke my amp - part 2   Vic K2VCO
    • [Amps] Suggestions - I broke my amp - part 2   Larry
• [Amps] Capacitor Values   Jim Thomson
• [Amps] 3CX1000A7 and larger   Steve Thompson
• [Amps] 2010 Handbook   TexasRF at aol.com
  • [Amps] 2010 Handbook   N1BUG
• [Amps] 2010 Handbook   TexasRF at aol.com
  • [Amps] 2010 Handbook   Carl
  • [Amps] 2010 Handbook   N1BUG
• [Amps] re compability of 3cx1200Z7 in lieu of 3cx1200D7eimac   Fern
• [Amps] Building a Mock Up   Lee Buller
  • [Amps] Building a Mock Up   gdaught6 at stanford.edu
    • [Amps] Building a Mock Up   Radio WC6W
  • [Amps] Building a Mock Up   Edward Swynar
  • [Amps] Building a Mock Up   Vic K2VCO
  • [Amps] Building a Mock Up   Paul Kraemer
    • [Amps] Building a Mock Up   Ian White GM3SEK
      • [Amps] Building a Mock Up   Carl
• [Amps] Building a Mock Up   Colin Lamb
  • [Amps] Building a Mock Up   gdaught6 at stanford.edu
• [Amps] older 3k   Dennis OConnor
• [Amps] Building a Mock Up   Dan Levin
• [Amps] older 3k   Jim Thomson
  • [Amps] older 3k   Dave M
• [Amps] re compability of 3cx1200Z7 in lieu of 3cx1200D7eimac   Jim Thomson
• [Amps] older 3k   John Becker
• [Amps] Building a Mock Up   TexasRF at aol.com
• [Amps] (no subject)   K8LEEWMM at aol.com
• [Amps] Adjusting tuned input ckt for 6 m amp, cold   John Farber
• [Amps] Matched Pairs of Tubes   kb5gt at cableone.net
  • [Amps] Matched Pairs of Tubes   Jim Barber
  • [Amps] Matched Pairs of Tubes   Carl
    • [Amps] Matched Pairs of Tubes   Sam Carpenter
  • [Amps] Matched Pairs of Tubes   Randall, Randy
    • [Amps] Matched Pairs of Tubes   Fortra
• [Amps] Plated screws   Stirling Schmidt
  • [Amps] Plated screws   n8de at thepoint.net
    • [Amps] Plated screws   Fuqua, Bill L
    • [Amps] Plated screws   DJ7WW
      • [Amps] Plated screws   Fuqua, Bill L
      • [Amps] Plated screws   Vic K2VCO
  • [Amps] Plated screws   donroden at hiwaay.net
    • [Amps] Plated screws   Carl
  • [Amps] Plated screws   Bill, W6WRT
• [Amps] source of '3rd harmonic'   Dan Sawyer
  • [Amps] source of '3rd harmonic'   Ken Brown
• [Amps] Adjusting tuned input ckt for 6m amp, cold   Robert Briggs
• [Amps] source of '3rd harmonic'   TexasRF at aol.com
• [Amps] Amps Digest, Vol 95, Issue 47   fsiyfr
  • [Amps] Amps Digest, Vol 95, Issue 47   n8de at thepoint.net
    • [Amps] Amps Digest, Vol 95, Issue 47   Carl
• [Amps] source of '3rd harmonic'   Dan Sawyer
  • [Amps] source of '3rd harmonic'   Shane Youhouse
    • [Amps] source of '3rd harmonic'   donroden at hiwaay.net
• [Amps] Matched Pairs of Tubes   Sam Carpenter
• [Amps] out of the office   john.brewer at us.schneider-electric.com
• [Amps] Mc-Master Carr   Alf Pousar
• [Amps] brass or BNP hardware   John Lyles
• [Amps] Scanned Ad Needed.   Michael Baker
  • [Amps] Scanned Ad Needed.   Mike
• [Amps] Mc-Master Carr issue   Alf Pousar
  • [Amps] Dentron DTR-2000L Tank Circuit   Mike & Becca Krzystyniak
    • [Amps] Dentron DTR-2000L Tank Circuit   Carl
• [Amps] Mc-Master Carr   Alf Pousar
• [Amps] MLA2500 meter needed   Eric Dobrowansky K2WD
  • [Amps] MLA2500 meter needed   Carl
    • [Amps] MLA2500 meter needed   Eric Dobrowansky K2WD
• [Amps] 1800 Watt Henry 2K4?   Roger (sub1)
  • [Amps] 1800 Watt Henry 2K4?   Mike
    • [Amps] 1800 Watt Henry 2K4?   Hal W5GHZ
  • [Amps] 1800 Watt Henry 2K4?   Shane Youhouse
    • [Amps] 1800 Watt Henry 2K4?   Carl
      • [Amps] 1800 Watt Henry 2K4?   Hal W5GHZ
      • [Amps] 1800 Watt Henry 2K4?   Jeff Blaine
      • [Amps] 1800 Watt Henry 2K4?   Roger
      • [Amps] 1800 Watt Henry 2K4?   Jeff Blaine
• [Amps] brass or BNP hardware   Jim Thomson
• [Amps] 4CX2500A/GU-84B tube   EA8AUW Edu
• [Amps] Tube Cooling   Lee Buller
• [Amps] Tube Cooling..   Robert Briggs
  • [Amps] Tube Cooling..   Carl
    • [Amps] Tube Cooling..   Roger (sub1)
      • [Amps] Tube Cooling..   DAVE WHITE
      • [Amps] Tube Cooling..   Carl
      • [Amps] Tube Cooling..   DJ7WW
      • [Amps] Tube Cooling..   Bill, W6WRT
      • [Amps] Tube Cooling..   Roger
      • [Amps] Tube Cooling..   Alek Petkovic
      • [Amps] Tube Cooling..   Roger
• [Amps] brass or BNP hardware   Mike Saculla
  • [Amps] brass or BNP hardware   pfizenmayer
• [Amps] GU-84B/4CX2500A amplifier project details   EA8AUW Edu
• [Amps] brass or BNP hardware   TexasRF at aol.com
  • [Amps] brass or BNP hardware   Carl
    • [Amps] brass or BNP hardware   DJ7WW
      • [Amps] brass or BNP hardware   Shane Youhouse
      • [Amps] brass or BNP hardware   Carl
      • [Amps] brass or BNP hardware   DJ7WW
      • [Amps] brass or BNP hardware   Roger (sub1)
      • [Amps] brass or BNP hardware   DJ7WW
      • [Amps] brass or BNP hardware   Carl
      • [Amps] brass or BNP hardware   DJ7WW
      • [Amps] brass or BNP hardware   Roger (sub1)
• [Amps] Tube Cooling   Roland AH6RR
  • [Amps] Tube Cooling   Dave M
    • [Amps] Tube Cooling   Jeff Blaine
• [Amps] Henry VHF Amp   Jay Musikar
• [Amps] Allied   Doug
  • [Amps] Allied   n8de at thepoint.net
    • [Amps] Allied   donroden at hiwaay.net
• [Amps] What a shame...   Roger
  • [Amps] What a shame...   Mike
  • [Amps] What a shame...   Paul Kraemer
    • [Amps] What a shame...   Carl
      • [Amps] What a shame...   Jeff Carter
      • [Amps] What a shame...   Roger
      • [Amps] What a shame...   Richard Solomon
      • [Amps] What a shame...   Carl
      • [Amps] What a shame...   Gary K9GS
  • [Amps] What a shame...   donroden at hiwaay.net
• [Amps] Amps] What a shame...   Baruch Zilbershatz
• [Amps] 1800 Watt Henry 2K4   Its from KE4VYN
  • [Amps] 1800 Watt Henry 2K4   Roger
• [Amps] 1800 Watt Henry   kb5gt at cableone.net
• [Amps] LK550 neg grid ... and bandswitch woes   Gary Hinson
  • [Amps] LK550 neg grid ... and bandswitch woes   Carl
  • [Amps] LK550 neg grid ... and bandswitch woes   Ken Nicely
• [Amps] Tube Cooling   Robert Briggs
  • [Amps] Tube Cooling   Carl
  • [Amps] Tube Cooling   Angel Vilaseca
• [Amps] 240 vac primary protection..again   Jim Thomson
  • [Amps] MOVs   Ken Brown
    • [Amps] MOVs   Roger
      • [Amps] MOVs   David Cutter
      • [Amps] MOVs   Roger
      • [Amps] MOVs   David Cutter
      • [Amps] MOVs   Roger
    • [Amps] MOVs   Carl
  • [Amps] 240 vac primary protection..again   Carl
• [Amps] Silicon Carbide J-FET   Hsu
• [Amps] LK550 neg grid ... and bandswitch woes   Gudguyham at aol.com
• [Amps] What a shame...   Gudguyham at aol.com
  • [Amps] What a shame...   Carl
• [Amps] Tube Cooling..   Baruch Zilbershatz
  • [Amps] Tube Cooling..   Roger
    • [Amps] Insulation tester   donroden at hiwaay.net
      • [Amps] Insulation tester   donroden at hiwaay.net
      • [Amps] Insulation tester   Carl
      • [Amps] Insulation tester   Bill, W6WRT
      • [Amps] Insulation tester   Larry Benko
    • [Amps] Tube Cooling..   Hsu
• [Amps] Silicon Carbide J-FET   John Lyles
  • [Amps] Silicon Carbide J-FET   Baruch Zilbershatz
    • [Amps] Silicon Carbide J-FET   Hsu
• [Amps] Silicon Carbide J-FET   Baruch Zilbershatz
• [Amps] Silicon Carbide J-FET   Baruch Zilbershatz
• [Amps] Silicon Carbide J-FET   Baruch Zilbershatz
• [Amps] AL-1500 problem   Stan Stockton
• [Amps] Tube cooling   Robert Briggs
  • [Amps] Tube cooling   Roger
• [Amps] Tube Cooling..   Jim Thomson
  • [Amps] Tube Cooling..   Carl
    • [Amps] Tube Cooling..   Bill, W6WRT
    • [Amps] Tube Cooling..   Ian White GM3SEK
      • [Amps] Tube Cooling..   Carl
      • [Amps] Tube Cooling..   Ian White GM3SEK
      • [Amps] Tube Cooling..   DJ7WW
      • [Amps] You can't make these up...   Shane Youhouse
      • [Amps] Tube Cooling..   Carl
      • [Amps] Tube Cooling..   Ian White GM3SEK
      • [Amps] Tube Cooling..   Carl
• [Amps] MOVs   Jim Thomson
  • [Amps] MOVs   Roger
• [Amps] A dual 4-1000 amp   Patrick
  • [Amps] A dual 4-1000 amp   kf8od at aol.com
  • [Amps] A dual 4-1000 amp   donroden at hiwaay.net
    • [Amps] A dual 4-1000 amp   Roger (K8RI)
  • [Amps] A dual 4-1000 amp   Fuqua, Bill L
    • [Amps] A dual 4-1000 amp   Patrick
      • [Amps] A dual 4-1000 amp   Fuqua, Bill L
    • [Amps] A dual 4-1000 amp   Roger (K8RI)
• [Amps] Tube Cooling   Robert Briggs
  • [Amps] Tube Cooling   Carl
• [Amps] Insulation tester   TexasRF at aol.com
• [Amps] A dual 4-1000 amp   TexasRF at aol.com
  • [Amps] A dual 4-1000 amp   Carl
    • [Amps] A dual 4-1000 amp   Jim Barber
      • [Amps] A dual 4-1000 amp   Carl
• [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?   mikflathead at aol.com
  • [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?   Carl
  • [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?   Larry Burke
  • [Amps] HOW MANY 3-500 CAN YOU PUT IN A SB220?   Charles Harpole
• [Amps] MOVs   Jim Thomson
• [Amps] A dual 4-1000 amp   Jim Thomson
  • [Amps] Transformer question   George
  • [Amps] Transformer help please   George
    • [Amps] Transformer help please   F?a???ad???? ?a?a???t??
• [Amps] Dual 4-1000A RF PA   kb5gt at cableone.net
• [Amps] blowers   W5JMW
• [Amps] GS35b teflon chimney   Allan Greening
  • [Amps] GS35b teflon chimney   Bill, W6WRT
    • [Amps] GS35b teflon chimney   MIKE DURKIN
      • [Amps] GS35b teflon chimney   Larry
• [Amps] AL-82 Blowing fuses on startup   Greg Chartrand
  • [Amps] AL-82 Blowing fuses on startup   Gary McAdams
    • [Amps] AL-82 Blowing fuses on startup   Paul Kraemer
• [Amps] A dual 4-1000 amp   Jim Thomson
• [Amps] AL-811H with 572's question   Hector Garcia XE2K
  • [Amps] AL-811H with 572's question   Hal W5GHZ
• [Amps] A dual 4-1000 amp   Rob Atkinson
• [Amps] W3NQN bandpass filters, question.   Martin Sole
  • [Amps] W3NQN bandpass filters, question.   Larry Benko
  • [Amps] W3NQN bandpass filters, question.   Jim Tonne
  • [Amps] W3NQN bandpass filters, question.   Ron Youvan
• [Amps] Help identifying tubes   mike stokes
  • [Amps] [Bulk] Help identifying tubes   Bill Coleman
    • [Amps] [Bulk] Help identifying tubes   Shane Youhouse
  • [Amps] [Bulk] Help identifying tubes   Bill Coleman
    • [Amps] [Bulk] Help identifying tubes   Roger
    • [Amps] [Bulk] Help identifying tubes   Jim W7RY
  • [Amps] Help identifying tubes   Ken Brown
    • [Amps] Help identifying tubes   Patrick Barthelow
  • [Amps] Help identifying tubes   Alek Petkovic
    • [Amps] GS-35B cooling blower   F5ICN
    • [Amps] Help identifying tubes   Carl
• [Amps] Help identifying tubes   N7KA at comcast.net
• [Amps] Help :Companys and best buy for new matched pair of 3-500Z tubes.   BEHIELS JEAN-PIERRE
• [Amps] Alpha 76 Series   Robert Kirkland
• [Amps] Help identifying tubes   John Becker
  • [Amps] Help identifying tubes   Glen Zook

Last message date: Tue Nov 30 14:56:14 PST 2010
Archived on: Fri Dec 3 09:04:28 PST 2010

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...