[Amps] 1800 Watt Henry 2K4?

[Hal W5GHZ]

Jeremy,
 
A good 2000 watt 50 ohm dummy load is an absolute necessity.
 
Hal
 
 
--- On Mon, 11/22/10, Carl <km1h at jeremy.mv.com> wrote:


From: Carl <km1h at jeremy.mv.com>
Subject: Re: [Amps] 1800 Watt Henry 2K4?
To: "Shane Youhouse" <kd6vxi at gmail.com>, "Roger (sub1)" <sub1 at rogerhalstead.com>
Cc: amps at contesting.com
Date: Monday, November 22, 2010, 9:16 AM


Thats where you really need a 2-30MHz slug to capture all the splatter!

Carl


----- Original Message ----- 
From: "Shane Youhouse" <kd6vxi at gmail.com>
To: "Roger (sub1)" <sub1 at rogerhalstead.com>
Cc: <amps at contesting.com>
Sent: Sunday, November 21, 2010 11:12 PM
Subject: Re: [Amps] 1800 Watt Henry 2K4?


> That's 100 watts of AM carrier drive.
>
> And Pout measured in PEP.
>
>
> :)
>
>
> --Shane
> KD6VXI
>
>
>
>
>
>
> On Sun, Nov 21, 2010 at 3:43 PM, Roger (sub1) 
> <sub1 at rogerhalstead.com>wrote:
>
>> I just ran across a 2KW on e-bay listed at 1800 out for 100 watts of 
>> drive.
>> I had one, but at 100 w of drive, with new tubes I never managed much
>> more than about 1200 out.
>> IIRC the manual also stated 1200 out.
>>
>> Am I, or did I miss something?
>>
>> 73
>>
>> Roger (K8RI)
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps