[Amps] GS35b teflon chimney

[MIKE DURKIN]

If there were different sizes .. might there also be different part numbers for them ?? IE .. I'm digging for the part number from Coleman that fits well for the GS35B ....

Mike
KC7NOA

> From: dezrat1242 at yahoo.com
> To: amps at contesting.com
> Date: Fri, 26 Nov 2010 23:37:20 -0800
> Subject: Re: [Amps] GS35b teflon chimney
> 
> ORIGINAL MESSAGE:
> 
> On Sat, 27 Nov 2010 03:30:35 -0000, "Allan Greening" <vk3pa at vk3pa.com>
> wrote:
> 
> >he..or is there another type around?
> 
> REPLY:
> 
> A replacement glass chimney from a Coleman lantern fits perfectly and is
> highly heat resistant. Mounting it could be a problem if you want to use
> clamps, but I used three small dabs of RTV silicone which worked great.
> 
> There might be more than one size so measure first. The right one leaves
> a gap of about 1/8 inch around the tube's fins. 
> 
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps