[Amps] brass or BNP hardware

[DJ7WW]

Only if the tube specifications are far exceeded.
3x 4-400 will do the same then.

73
Peter

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Carl

I just serviced a LK-800C and discovered 6-32 steel hardware in the RF path 
on both sides of the plate blocking cap. One side was darkened overall and 
the other was black where the threads entered the cap, it looked like rust 
under magnification. This amp will do an easy 3500-4000W + with sufficient 
drive.