[Amps] Any experiences with "powergridtube"? (YC156 hunt)
Ian White GM3SEK
gm3sek at ifwtech.co.uk
Fri Oct 1 00:52:18 PDT 2010
Jim Thomson wrote:
>## reid @ Eimac tells me that although it's stated the tube has a 6
>min warm up, to allow a full 8 mins of warm up. The B+ can be
>applied simultaneously with fil
>V. The tube is cut off on RX anyway. You just can't draw idle
>current or apply drive for 8 mins. Easiest method is to inhibit the
>key line for 8 mins..or use a stop watch !
>
There's one YC156 heater transformer that has its own IP address, so it
can be activated 8 minutes before the owner arrives home.
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
More information about the Amps
mailing list