[Amps] Pulse tuning

[DF3KV]

No.
Plate current will not be way higher and dissipation will not either.
I tune for maximum out in the center of the band and don´t touch anything
while moving around in a contest.
Output power drop is not more then 1db at the edges.

Your loaded Q might be too high!

73
Peter


-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On 

##  tune with a cxr, and if something is off resonance a bit, then plate
current is way higher than normal, and po is way less than normal.   Plate
diss is way higher than normal.